* libguile/objcodes.c (OBJCODE_COOKIE): Bump again, as our jump offsets
are now multiplied by 8.
* libguile/vm-i-system.c (BR): Interpret the 16-bit offset as a relative
jump to the nearest 8-byte-aligned block -- increasing relative jump
range from +/-32K to +/-240K.
(mvra): Do the same for the mvra jump.
* libguile/vm.c (really_make_boot_program): Align the mvra.
* module/language/assembly.scm (align-block): New export, for aligning
blocks.
* module/language/assembly/compile-bytecode.scm (write-bytecode): Emit
jumps to the nearest 8-byte-aligned block. Effectively our range is 18
bits in either direction. I would like to do this differently -- have
long-br and long-br-if, and all the other br instructions go to 8 bits
only. But the assembler doesn't have an appropriate representation to
allow me to do this yet, so for now this is what we have.
* module/language/assembly/decompile-bytecode.scm (decode-load-program):
Decode the 19-bit jumps.
* libguile/objcodes.c (OBJCODE_COOKIE): Bump objcode cookie, as we added
to struct scm_objcode.
* libguile/objcodes.h (struct scm_objcode): Add a uint32 after metalen
and before base, so that if the structure has 8-byte alignment, base
will have 8-byte alignment too. (Before, base was 12 bytes from the
start of the structure, now it's 16 bytes.)
* libguile/vm-engine.h (ASSERT_ALIGNED_PROCEDURE): Add a check that can
be turned on with VM_ENABLE_PARANOID_ASSERTIONS.
(CACHE_PROGRAM): Call ASSERT_ALIGNED_PROCEDURE.
* libguile/vm-i-system.c (long-local-ref): Add a missing semicolon.
* libguile/vm.c (really_make_boot_program): Rework to operate directly
on a malloc'd buffer, so that the program will be 8-byte aligned.
* module/language/assembly.scm (*program-header-len*): Add another 4 for
the padding.
(object->assembly): Fix case in which we would return (make-int8 0)
instead of (make-int8:0). This would throw off compile-assembly.scm's
use of addr+.
* module/language/assembly/compile-bytecode.scm (write-bytecode): Write
out the padding int.
* module/language/assembly/decompile-bytecode.scm (decode-load-program):
And pop off the padding int too.
* module/language/glil/compile-assembly.scm (glil->assembly): Don't pack
the assembly, assume that assembly.scm has done it for us. If a
program has a meta, pad out the program so that meta will be aligned.
* test-suite/tests/asm-to-bytecode.test: Adapt to expect programs to
have the extra 4-byte padding int.
* libguile/frames.c (scm_frame_external_link): Removed.
* libguile/frames.h: No need to have the "external link" in the stack
frame -- update macros to take the new situation into account.
* libguile/objcodes.h (struct scm_objcode): Rename the nexts field to
"unused". In the future we can use it for nlocs, I think.
(SCM_OBJCODE_NEXTS): removed.
* libguile/programs.h:
* libguile/programs.c (scm_make_program): Expect the third argument to
be a vector of free variables, not a list of free variables.
SCM_BOOL_F indicates no free variables, not SCM_EOL.
(program_mark): Adapt.
(scm_program_arity): No more nexts.
(scm_program_free_vars): Replaces scm_program_externals.
* libguile/vm-engine.c (VM_CHECK_EXTERNAL)
(vm_engine): No need for the "external" var.
* libguile/vm-engine.h (CACHE_PROGRAM): Update for SCM_PROGRAM_FREE_VARS
instead of SCM_PROGRAM_EXTERNALS.
(NEW_FRAME): Update for new frame size, and no need to cons up
externals. Yay :)
* libguile/vm-i-loader.c (load-program): Update for scm_make_program.
* libguile/vm-i-system.c (external-ref, external-set): No more.
(make-closure): No more.
(goto/args): No need to re-cons externals here. Update for new stack
frame size.
(mv-call, return, return/values): Update for new frame size. No need
to reinstate externals on return.
* libguile/vm.c (really_make_boot_program, scm_load_compiled_with_vm):
Update for scm_make_program.
* module/language/objcode/spec.scm (objcode-env-externals): Treat '() as
#f, for the externals. Need to clean this up later...
* module/system/vm/program.scm (arity:nexts): Remove. Rename
program-external to program-free-vars.
* libguile/vm.c (struct t_32bit_aligned): New.
(really_make_boot_program)[bytes]: Use it. This fixes possibly
unaligned accesses, which cause a "bus error" on some platforms (e.g.,
sparc-*).
* libguile/vm-i-system.c (toplevel-ref, toplevel-set)
* libguile/vm-i-loader.c (link-now):
* libguile/vm.c (resolve_variable): Factor out common code to a static
method. The compiler can still inline it, so it shouldn't have a
significant performance effect.
* libguile/vm-engine.c (vm_error_no_such_module): Remove now-unused
label.
* libguile/frames.c:
* libguile/frames.h:
* libguile/instructions.c:
* libguile/instructions.h:
* libguile/objcodes.c:
* libguile/objcodes.h:
* libguile/programs.c:
* libguile/programs.h:
* libguile/vm-bootstrap.h:
* libguile/vm-engine.c:
* libguile/vm-engine.h:
* libguile/vm-expand.h:
* libguile/vm-i-scheme.c:
* libguile/vm.c:
* libguile/vm.h: Update to use SCM_API and SCM_INTERNAL correctly. Adjust
copyright to be the same as the copyright of Guile itself, which should
be fine given that the FSF holds the whole thing.
Thanks to Juhani Rantanen for the report.
* libguile/continuations.c (scm_make_continuation): Delay making the smob
until the data is fully initialized. Fixes a bug whereby a GC in
scm_vm_capture_continuations would catch the us with an undefined
continuation->vm_conts, leading to marking badness.
* libguile/vm.c (vm_cont_free): Report the correct size to scm_gc_free.
Reported by Daniel Kraft <d@domob.eu>.
* libguile/frames.c, libguile/vm.c: Include <stdlib.h>, use `size_t'
instead of `scm_sizet'.
* libguile/objcodes.c, libguile/programs.c, libguile/vm-engine.c,
libguile/vm-i-loader.c, libguile/vm-i-system.c: Use `scm_list_X ()'
instead of the deprecated `SCM_LISTX ()'.
* libguile/extensions.h: Define a scm_t_extension_init_func.
* libguile/frames.c:
* libguile/instructions.c:
* libguile/objcodes.c:
* libguile/programs.c:
* libguile/vm.c: Register extension init funcs. Should play nicer with a
static Guile, in addition to working on Darwin with non-default
installation prefixes without munging DYLD_LIBRARY_PATH.
* module/system/vm/frame.scm:
* module/system/vm/instruction.scm:
* module/system/vm/objcode.scm:
* module/system/vm/program.scm:
* module/system/vm/vm.scm: Use load-extension.
* guile-tools.in: Fix the checks to account for non-srcdir builds.
* libguile/frames.c:
* libguile/objcodes.c:
* libguile/programs.c:
* libguile/instructions.c:
* libguile/vm.c: Fix snarf-includes to cope with non-srcdir builds.
* libguile/instructions.h:
* libguile/instructions.c: Fix the stubs inclusion to be non-srcdir
compatible.
* libguile/vm-expand.h (VM_DEFINE_INSTRUCTION): Fix some things so as not
to require the instructions.h defintitions, since we have the codes
already. Not important tho :)
* pre-inst-guile-env.in: Minor tweak that should have no effect.
* test-suite/standalone/Makefile.am (all-local): Remove a chmod +x step,
the configure.ac rule should do that if necessary.
* libguile/programs.h (SCM_F_PROGRAM_IS_BOOT, SCM_PROGRAM_IS_BOOT): Flags
for determining if a program is a boot program. It turns out that our
heuristics e.g. in stacks.c would catch non-boot programs, like
programs that end with (goto/args 1), because the 1 is the same byte as
`halt'. That took a while to find...
* libguile/stacks.c (stack_depth, read_frames): Use the new boot prog
macros.
(scm_make_stack): Assert that we read the number of frames that we said
we would.
* libguile/vm.c (really_make_boot_program): Mark boot programs
appropriately.
* libguile/eval.c (scm_call_0, scm_call_1, scm_call_2, scm_call_3)
(scm_call_4): Special-case compiled procedures here, to avoid consing.
* libguile/vm.h:
* libguile/vm.c (scm_c_vm_run): Take a SCM after all.
(scm_vm_apply, scm_load_compiled_with_vm): Adapt to vm_run change.
* libguile/vm-engine.c (VM_USE_HOOKS, VM_USE_CLOCK, VM_CHECK_EXTERNAL)
(VM_CHECK_OBJECT): Update to define these here, before including
vm-engine.h.
(vm_run): Change so that we can make different engines. Also, we take
an array of arguments, and the struct scm_vm directly, so as to avoid
any need to cons.
* libguile/vm-engine.h (CHECK_EXTERNAL, CHECK_OBJECT): Add some UNLIKELY
bits; don't seem to help.
* libguile/vm.c (vm_dispatch_hook): Change to not pass the VP. This needs
some love, and perhaps we revert to the old way.
(VM_ENGINE): Actually make two engines, vm_regular_engine and
vm_debug_engine. Probably there is room for improvement here. Actually
their speeds are the same at the moment.
(make_vm): Choose which engine to run; currently the debug engine by
default.
(scm_c_vm_run): A thin wrapper to invoke a VM without consing.
(scm_vm_apply): Use scm_c_vm_run.
(scm_load_compiled_with_vm): Use scm_c_vm_run.
* libguile/throw.c (scm_c_catch): Stash away the current vm's regs, and
restore them if there's a nonlocal exit. There is a terrible case we
have to handle if we catch from when the vm smob type isn't registered
but the throw has the vm registered, but I think we handle this fine.
* libguile/vm-engine.c (vm_run):
* libguile/vm-i-system.c (halt): Don't make a dynwind context, so that
entering the VM doesn't cons at all, except for the arg list. Maybe we
can fix that bit too.
* libguile/vm.c (vm_reset_stack): Remove, as there is no more dynwind.
(make_vm): Return #f if the tc16 hasn't yet been registered.
* gdbinit: Untested attempts to get the stack fondling macros to deal
with the new program representation.
* libguile/frames.c (scm_vm_frame_arguments, scm_vm_frame_source)
(scm_vm_frame_local_ref, scm_vm_frame_local_set_x): SCM_PROGRAM_DATA is
a struct scm_objcode*.
* libguile/instructions.h:
* libguile/instructions.c: Hide the instruction table and the struct
scm_instruction structure; all access to instructions now goes through
procedures. This is because instructions are no longer in a packed
array indexed by opcode. Also, declare a mask that all instructions
should fit in.
* libguile/objcodes.h:
* libguile/objcodes.c: Rewrite so that object code directly maps its
arity and length from its bytecode. This makes it unnecessary to keep
this information in programs, allowing programs to be simple conses
between the code (objcodes) and data (the object table and the closure
variables).
* libguile/programs.c (scm_make_program): Rework so that make-program
takes objcode, an object table, and externals as arguments. It's much
clearer this way, and we avoid malloc().
* libguile/stacks.c (is_vm_bootstrap_frame): Update for program/objcode
changes.
* libguile/vm-engine.c (vm_run): Initialize the jump table on the first
run, with the opcodes declared in the instruction sources, and with bad
instructions raising an error instead of wandering off into the
Unknown.
* libguile/vm-engine.h (FETCH_LENGTH): Always represent lengths as 3
bytes. The old code was too error-prone.
(NEXT_JUMP): Mask the instruction with SCM_VM_INSTRUCTION_MASK.
(NEW_FRAME): Update for program/objcode changes.
* libguile/vm-expand.h (VM_DEFINE_FUNCTION, VM_DEFINE_INSTRUCTION)
(VM_DEFINE_LOADER): Update so that we explicitly specify opcodes, so
that we have a stable bytecode API.
* libguile/vm-i-loader.c: Update license to LGPLv2+. Explicitly declare
opcodes.
(load-integer): Use an int instead of a long as the accumulator; still
need to revisit this code at some point, I think.
(load-program): Simplify, thankfully!! Just creates the objcode slice
and rolls with it.
* libguile/vm-i-scheme.c: Number the opcodes explicitly.
* libguile/vm-i-system.c: Update license to LGPLv2+. Explicitly declare
opcodes.
(make-closure): Update for new program API.
* libguile/vm.c (vm_make_boot_program): Update for new program/objcode
API. Still a bit ugly.
(scm_load_compiled_with_vm): Update for new program/objcode API.
* module/language/assembly.scm (byte-length): Fix byte-length calculation
for loaders, and load-program.
(code-pack, code-unpack): Start to move things from (system vm conv)
here.
(object->code, code->object): More things from conv.scm.
* module/language/glil.scm (<glil-program>): Add a new field,
closure-level.
(make-glil-program, compute-closure-level): Calculate the "closure
level" when making a glil program. This is the maximum depth of
external binding refs in this closure.
(unparse-glil): Fix label serialization.
* module/language/glil/compile-assembly.scm (make-meta): Prepend #f for
the meta's object table, though maybe in the future we can avoid
creating assembly in the first place.
(assoc-ref-or-acons, object-index-and-alist): GRRR! Caught again by the
different sets of arguments to assoc and assoc-ref!
(glil->assembly): Attempt to make the <glil-program> case more
readable, and fix the bugs. Sorry I don't know how to comment this
change any more than this.
(glil->assembly): For <glil-module> serialize the whole key, not just
the name.
(dump-object): subprogram-code is already a list. Serialize integers as
strings, not u8vectors. Fix the order of lists and vectors.
* module/language/glil/spec.scm (glil): Switch orders, so we prefer glil
-> assembly -> objcode. Actually glil->objcode doesn't work any more,
needs to be removed I think.
* module/language/objcode/spec.scm (objcode->value):
s/objcode->program/make-program/.
* module/language/scheme/inline.scm: Add acons inline.
* module/system/vm/conv.scm (make-byte-decoder): Skip the first 8 bytes,
they are header. Handle subprograms properly. Still needs help though.
(decode-length): Lengths are always 3 bytes now.
* module/system/vm/disasm.scm: Superficial changes to keep things
working. I'd like to fix this better in the future.
* module/system/vm/frame.scm (bootstrap-frame?): Fixes for
program-bytecode.
* module/system/vm/program.scm: Export make-program. It's program-objcode
now, no more program-bytecode.
* module/system/vm/vm.scm (vm-load): Use make-program.
* test-suite/tests/asm-to-bytecode.test: New test, very minimal.
* module/system/vm/objcode.scm: Export word-size, byte-order, and
write-objcode.
* libguile/programs.h (struct scm_program): Remove the module and meta
fields.
* libguile/programs.c (scm_c_make_program): Add a new argument, `objs'.
If it's a vector, we'll look for the module and the metadata in there,
instead of having them in the scm_program structure.
(scm_c_make_closure, program_mark, scm_program_meta)
(scm_c_program_source, scm_program_module): Adapt to the new program
representation.
* libguile/objcodes.c (scm_objcode_to_program): Pass #f as the object
table when making the program.
* libguile/vm-engine.h (CACHE_PROGRAM):
* libguile/vm-engine.c (vm_run): Rework to use the simple vector API for
getting the current object table. Call the helper,
vm_make_boot_program, to make the boot program.
* libguile/vm-i-loader.c (load-program): Set the current module and the
meta in the object vector, which we pass to scm_c_make_program.
* libguile/vm-i-system.c (toplevel-ref, toplevel-set): Adapt to the new
program representation.
* module/language/glil/compile-objcode.scm (codegen): Clarify.
* libguile/vm.h (struct scm_vm_cont):
* libguile/vm.c (capture_vm_cont, reinstate_vm_cont): Change so we just
store the registers as they are, with the reloc.
(vm_cont_mark): Only mark the stack if it has elements on it, otherwise
we get a bogus fp.
* libguile/stacks.c (scm_make_stack): Update for change to vm
continuations.
* benchmark/measure.scm (measure): Fix bitrot.
* libguile/vm.c (VM_ENABLE_STACK_NULLING): Undefine this, as it hasn't
caught any errors in quite a while.
* libguile/vm-engine.h (PUSH_LIST): Add a parameter to check that the
list was proper.
* libguile/vm-i-system.c: Adapt PUSH_LIST callsites to pass SCM_NULLP or
SCM_NULL_OR_NIL_P, as appropriate. Add a check to return/values*.
* libguile/vm.c: Add lang.h header for SCM_NULL_OR_NIL_P.
* test-suite/tests/elisp.test: Fix XFAIL for elisp + apply.
* doc/ref/vm.texi (Stack Layout): Update to remove references to the
"heap link".
* gdbinit: Update for "heap link" removal.
* libguile/frames.c:
* libguile/frames.h: Update macros and diagram for removal of "heap
link". As part of this, we also remove "heap frames", replacing them
with "vm frames", which are much like the interpreter's debug objects,
but for VM stacks. That is to say, they don't actually hold the stack
themselves, just the pointers into stack that's held by a continuation
(either captured or current).
* libguile/stacks.c (stack_depth, read_frames): Since a "stack" object is
really a copy of information that comes from somewhere else, it makes
sense to copy over info from the VM, just as `make-stack' does from the
evaluator. The tricky bit is to figure out how to interleave VM and
interpreter frames. We do that by starting in the interpreter, and
whenever the current frame's procedure is actually a program, we switch
to the VM stack, switching back when we reach a "bootstrap frame". The
last bit is hacky, but it does work...
(is_vm_bootstrap_frame): Hacky predicate to see if a VM frame is a
bootstrap frame.
(scm_make_stack): Accept a VM frame in addition to debug frames.
Probably has some bugs in this case. But in the case that the arg is
#t (a common case), do the right thing, capturing the top VM frame as
well, and interleaving those frames appropriately on the stack.
As an accident, we lost the ability to limit the number of frames in
the backtrace. We could add that back, but personally I always want
*all* frames in the trace... Narrowing still works fine, though there
are some hiccups sometimes -- e.g. an outer cut to a procedure that
does a tail-call in VM code will never find the cut, as it no longer
exists in the continuation.
* libguile/vm.h (struct scm_vm): So! Now that we have switched to save
stacks in the normal make-stack, there's no more need for `this_frame'
or `last_frame'. On the other hand, we can take this opportunity to fix
tracing: when we're in a trace hook, we set `trace_frame' on the VM,
so we know not to fire hooks when we're already in a hook.
(struct scm_vm_cont): Expose this, as make-stack needs it to make VM
frames from VM continuations.
* libguile/vm.c (scm_vm_trace_frame): New function, gets the current
trace frame.
(vm_mark, make_vm): Hook up the trace frame.
(vm_dispatch_hook): New hook dispatcher, with a dynwind so it does the
right thing if the hook exits nonlocally.
* libguile/vm-engine.c (vm_run): No more this_frame in the wind data.
* libguile/vm-engine.h (RUN_HOOK): Run hooks through the dispatcher.
(ALIGN_AS_NON_IMMEDIATE, POP_LIST_ON_STACK): Remove unused code.
(NEW_FRAME): Adapt for no HL in the frame.
* libguile/vm-i-system.c (goto/args, mv-call, return, return/values):
Adapt for no HL in the frame.
* module/system/vm/frame.scm:
* module/system/vm/vm.scm: Beginnings of some reworkings, needs more
thought.
* ice-9/boot-9.scm (compile-time-environment): Remove definition from
boot-9 -- instead, autoload it and `compile' from (system base
compile).
* libguile/objcodes.h:
* libguile/objcodes.c (scm_objcode_to_program): Add an optional argument,
`external', the external list to set on the returned program.
* libguile/vm-i-system.c (externals): New instruction, returns the
external list. Only used by (compile-time-environment).
* libguile/vm.c (scm_load_compiled_with_vm): Adapt to
scm_objcode_to_program change.
* module/language/scheme/translate.scm (translate): Actually pay
attention to the environment passed as an argument.
(custom-transformer-table): Expand out (compile-time-environment) to
something that can be passed to `compile'.
* module/system/base/compile.scm (*current-language*): Instead of
hard-coding `scheme' in various places, use a current language fluid,
initialized to `scheme'.
(compile-file, load-source-file): Adapt to *current-language*.
(load-source-file): Ada
(scheme-eval): Removed, no one used this.
(compiled-file-name): Don't hard-code "scm" and "go"; instead use the
%load-extensions and %load-compiled-extensions.
(cenv-module, cenv-ghil-env, cenv-externals): Some accessors for
compile-time environments.
(compile-time-environment): Here we define (compile-time-environment)
to something that will return #f; the compiler however produces
different code as noted above.
(compile): New function, compiles an expression into a thunk, then runs
the thunk to get the value. Useful for procedures. The optional second
argument can be either a module or a compile-time-environment; in the
latter case, we can recompile even with lexical bindings.
(compile-in): If the env specifies a module, set that module for the
duration of the compilation.
* module/system/base/syntax.scm (%compute-initargs): Fix a bug where the
default value for a field would always replace a user-supplied value.
Whoops.
* module/system/il/ghil.scm (ghil-env-dereify): New function, takes the
result of ghil-env-reify and turns it back into a GHIL environment.
* scripts/compile (compile): Remove some of the tricky error handling, as
the library procedures handle this for us.
* test-suite/tests/compiler.test: Add a test for the dynamic compilation
bits.
* ice-9/Makefile.am: Don't compile popen.scm, its behaviour at runtime
is not consistent -- seems to miss some GC references? I suspect a bug
in the compiler. In any case without popen.scm being compiled,
continuations.test, r4rs.tes, and r5rs_pitfall.test do pass.
* libguile/threads.h (scm_i_thread):
* libguile/threads.c (thread_mark, guilify_self_2): Add a field for the
thread's vm. Previously I had this as a fluid, but it seems that newly
created threads share their fluid values from the creator thread; as
expected, I guess. In any case one VM should not be active in two
threads.
* libguile/vm.c (scm_the_vm): Change to access the thread-local vm,
instead of accessing a fluid.
(scm_the_vm_fluid): Removed.
* module/system/vm/vm.scm: Removed *the-vm*.
* libguile/vm-i-system.c (goto/cc): Add some asserts here.
* libguile/vm.c (capture_vm_cont): Add some asserts here too.
(reinstate_vm_cont): Null the correct number of bytes. Add a FIXME.
(vm_reset_stack): Make the code a bit clearer. Null the correct number
of bytes.
* libguile/vm-engine.h (NULLSTACK_FOR_NONLOCAL_EXIT): New macro, handles
a very tricky case that took me days to find! Amply commented. Expands
to nothing in the normal case.
* libguile/vm-i-system.c (call, goto/args, mv-call): Call
NULLSTACK_FOR_NONLOCAL_EXIT in the right places. Fixes
continuations.test.
* libguile/vm-engine.c (vm_error_wrong_num_args): Sync the registers
before calling scm_wrong_num_args. (The other cases are handled more
uniformly.)
* libguile/vm.c (vm_heapify_frames_1): Add a FIXME: I don't think we
should be modifying the stack.
(scm_vm_save_stack): If stack nulling is enabled, verify the stack here
before reifying it.
* module/language/scheme/spec.scm (scheme): Use primitive-eval here
instead of eval, because at the repl we do want to allow evaluations to
have side effects like setting the current module.
* libguile/vm-engine.h (CHECK_STACK_LEAK, NULLSTACK): Add a new mode,
VM_ENABLE_STACK_NULLING, that tries to ensure that all stack data past
the top of the stack is NULL. This helps to verify the VM's
consistency. If VM_ENABLE_STACK_NULLING is not defined, there is no
overhead.
(DROP, DROPN): Hook into NULLSTACK.
(POP_LIST): Hoo, fix a good bug: if CONS triggered a GC, the elements
of the list that had not yet been consed would not be marked, because
the sp was already below them.
(NEXT): Hook into CHECK_STACK_LEAK.
(INIT_ARGS): Add a note that consing the rest arg can cause GC.
(NEW_FRAME): Cons up the external data after initializing the frame, so
that if GC is triggered, the precise marker sees a well-formed frame.
* libguile/vm-i-loader.c (load-program): In the four-integers case, use
the POP macro so that we can hook into NULLSTACK (if necessary).
* libguile/vm-i-scheme.c (ARGS2, ARGS3): Hook into NULLSTACK.
* libguile/vm-i-system.c (halt): Null the nvalues. Rework some asserts
into using ASSERT, and null the stack when we free the frame.
(variable-set): Use DROPN instead of sp -= 2.
(BR): Hook into NULLSTACK.
(goto/args): Hook into NULLSTACK. In the non-self case, delay updating
the frame until after INIT_ARGS so that GC sees a well-formed frame.
Delay consing the externals until after the frame is set up, as in
NEW_FRAME.
(call/cc): Add some asserts.
(return): Rework some asserts into ASSERT, and hook into NULLSTACK.
(return/values): Hook into NULLSTACK, and use ASSERT.
(return/values*) Use ASSERT.
* libguile/vm.c (VM_ENABLE_ASSERTIONS, VM_ENABLE_STACK_NULLING): These
are the variables that control assertions and nulling. Perhaps we can
do these per-engine when we start compiling the debug engine separate
from a speedy engine.
(vm_mark_stack): Add a precise stack marker. Yay!
(vm_cont_mark): Mark the continuation stack precisely.
(capture_vm_cont): Record the difference from the vp's stack_base too,
so that we can translate the dynamic links when marking the
continuation stack. Memset the stack to NULL if we are doing nulling.
(reinstate_vm_cont): If we are nulling, null out the relevant part
of the stack.
(vm_reset_stack): When resetting sp due to a nonlocal exit, null out
the stack too.
(vm_mark): If we are nulling, assert that there are no extra values on
the stack. Mark the stack precisely.
* libguile/programs.c (scm_c_make_closure): If the program is actually
not a program, abort. This can happen if GC misses a reference, as
currently seems to happen.
* libguile/vm.c (vm_mark): Revert part of
7ff017002d, which changed the call to
scm_mark_locations. I'm 99% *sure* this is wrong, but it seems to
prevent missed references when recompiling the .go files in guile
itself. Needs revisiting soon, but for the time being we can go back to
where we were a couple of days ago.
* libguile/vm-i-system.c (halt, vector, vector-mark): Sync the registers
before calling into C, as it may GC.
* libguile/continuations.c (continuation_mark): Mark the vm
continuations.
* libguile/vm.c (vm_cont_mark): Fix the marking function.
(vm_mark): Fix this one too -- the size is a number of STACKITEMS,
which we foolishly assume are the same size as SCM.
* test-suite/tests/ftw.test: Make our stat hacks verifyable without
assuming that they are interpreted.
* test-suite/tests/r5rs_pitfall.test: Re-indent.
* libguile/vm.c (the-vm): If the dynamic binding of *the-vm* is false,
make a new vm. Fixes multiple threads with the vm since the *the-vm*
fluid changes.
* libguile/continuations.c (scm_make_continuation): Capture VM
continuations as well, as their stack is outside the C stack.
(copy_stack): Reinstate VM stacks with the C stack.
* libguile/continuations.h (scm_t_contregs): Add a pointer for VM stacks.
A binary-incompatible change -- hopefully not too many people were
messing around with this struct, though.
* libguile/vm-engine.c (vm_run): Add a note about possibly maintaining a
stack of vms.
* libguile/vm.c (struct scm_vm_cont): New struct, distinct from scm_vm.
(vm_cont_mark, vm_cont_free, capture_vm_cont, reinstate_vm_cont):
Reorder some code, and fix some bad assumptions about what part of the
stack to copy; obviously this code was never used.
* libguile/vm.h:
* libguile/vm.c (scm_vm_capture_continuations)
(scm_vm_reinstate_continuations): New public functions, used by
continuations.c.
* module/system/vm/vm.scm:
* libguile/vm.h:
* libguile/vm.c: Make the `the-vm' procedure access a fluid, `*the-vm*'.
Export that fluid from vm.h and vm.scm.
* libguile/vm.c: Move 'vm-run, 'vm-error, 'debug sym initialization up to
the bootstrap phase, so they are ready if load-compiled/vm is called
before (system vm vm) is loaded.
* ice-9/boot-9.scm: Only define load-compiled as #f if it's not already
defined, which won't normally be the case.
* libguile/guile-vm.c: Removed, there's no more guile-vm binary.
* libguile/frames.c: (with change frame? -> heap-frame?)
* libguile/frames.h:
* libguile/instructions.c:
* libguile/instructions.h:
* libguile/objcodes.c:
* libguile/objcodes.h:
* libguile/programs.c:
* libguile/programs.h:
* libguile/vm-bootstrap.h: (was bootstrap.h)
* libguile/vm-engine.c: (was vm_engine.c)
* libguile/vm-engine.h: (was vm_engine.h)
* libguile/vm-expand.h: (was vm_expand.h)
* libguile/vm-i-loader.c: (was vm_loader.c)
* libguile/vm-i-scheme.c: (was vm_scheme.c)
* libguile/vm-i-system.c: (was vm_system.c)
* libguile/vm.c:
* libguile/vm.h: These files moved here from src/, as guile-vm is now a
part of libguile.
* libguile/init.c: Bootstrap the VM. Yay!
* libguile/Makefile.am: The necessary chicanery here.
* module/system/vm/Makefile.am:
* module/system/vm/bootstrap.scm:
* module/system/vm/frame.scm:
* module/system/vm/instruction.scm:
* module/system/vm/objcode.scm:
* module/system/vm/program.scm:
* module/system/vm/vm.scm:
* pre-inst-guile-env.in: Add builddirs to the load path; add module/ to
the path in the empty-$GUILE_LOAD_PATH case as well.
* src/Makefile.am: Moved out everything except guilec and guile-disasm,
which probably should be moved to the scripts directory?
* testsuite/Makefile.am: Update to find guile-vm in the right place.
* module/system/vm/Makefile.am:
* module/system/vm/bootstrap.scm: Removed bootstrap.scm, scm_init_guile
handles the bootstrapping for us.
* module/system/vm/frame.scm:
* module/system/vm/instruction.scm:
* module/system/vm/objcode.scm:
* module/system/vm/program.scm:
* module/system/vm/vm.scm: Call the init functions in libguile; should
fix at some point to avoid the dlopen?
