* libguile/frames.c (scm_frame_source): Instead of assuming that
scm_frame_procedure is correct, use the IP to get the source.
(scm_frame_instruction_pointer): Return an absolute value instead of
assuming that slot 0 is correct. (It isn't, when preparing for a tail
call.)
* libguile/programs.h:
* libguile/programs.c (scm_find_source_for_addr): New internal helper.
* module/system/repl/debug.scm (print-registers): Readably print
absolute instruction pointers.
* module/system/vm/coverage.scm: Complete rewrite to use absolute IP's.
We can't assume that frame-procedure is cheap if it is correct, or
correct if it is cheap. Anyway using the address is better anyway.
(coverage-data->lcov): Disable per-function info temporarily.
(loaded-modules, module-procedures, closest-source-line)
(closed-over-procedures): Remove these. Instead of going from
procedures to source info, now we go from ELF image to source info.
* module/system/vm/debug.scm (debug-context-length): New interface.
* module/system/vm/program.scm (source-for-addr): New internal helper.
* module/system/repl/debug.scm (<debug>): Remove for-trap?. Backtraces
with RTL will always happen pre-retire on the top frame, source info
is pre-retire, and continuations will always have a source-marked
receive or receive-values or whatever with the right source marking,
so we can remove this complication.
(print-frame): Use frame-source.
(print-frames): Remove for-trap? kw.
* module/system/repl/command.scm (define-stack-command, backtrace)
(up, down, frame): Remove for-trap? introduced local, and its uses.
(repl-pop-continuation-resumer): Adapt to make-debug change.
* module/system/repl/error-handling.scm (call-with-error-handling):
Adapt to make-debug change.
* module/system/vm/frame.scm (frame-next-source): Remove. RTL sources
are pre-retire.
* module/system/vm/trap-state.scm (add-ephemeral-stepping-trap!): Adapt
to use frame-source. Still some work to do here.
* module/language/tree-il.scm (pre-order): Re-implement in terms of
pre-post-order, and rename from pre-order!.
* module/language/tree-il/primitives.scm (expand-primitives): Adapt to
pre-order change, and rename from expand-primitives!.
* module/language/tree-il/optimize.scm (optimize): Adapt to
expand-primitives! change, and rename from optimize!.
* module/language/tree-il/compile-glil.scm:
* module/system/repl/common.scm:
* test-suite/tests/cse.test:
* test-suite/tests/peval.test:
* test-suite/tests/tree-il.test: Adapt to expand-primitives and optimize
changes.
* doc/ref/api-debug.texi (VM Hooks): Update documentation.
* libguile/vm.c (vm_dispatch_hook):
* libguile/vm-engine.c: Rework the hook machinery so that they can
receive an arbitrary number of arguments. The return and abort
hooks will pass the values that they return to their continuations.
(vm_engine): Adapt to ABORT_CONTINUATION_HOOK change.
* libguile/vm-i-system.c (return, return/values): Adapt to
POP_CONTINUATION_HOOK change.
* module/system/vm/frame.scm (frame-return-values): Remove. The
pop-continuation-hook will pass the values directly.
* module/system/vm/trace.scm (print-return):
(trace-calls-to-procedure):
(trace-calls-in-procedure): Update to receive return values
directly.
* module/system/vm/traps.scm (trap-in-procedure)
(trap-in-dynamic-extent): Ignore return values.
(trap-frame-finish, trap-calls-in-dynamic-extent)
(trap-calls-to-procedure): Pass return values to the handlers.
* module/system/repl/common.scm: Add not only 2013, but also 2012 to the
copyright notice at the top of the file, since the file was changed in
2012.
(*version*): Bump copyright year to 2013 in REPL greeting.
* module/ice-9/boot-9.scm (current-language): New parameter.
* module/system/base/language.scm (*current-language*): Pull fluid from
parameter.
(current-language): Now a re-exported parameter.
* doc/ref/compiler.texi: Update reference from *current-language* fluid
to current-language parameter.
* module/system/base/compile.scm (compile-and-load):
* module/ice-9/top-repl.scm (top-repl): Default to the current language,
not to Scheme.
* module/ice-9/eval-string.scm:
* module/system/base/language.scm:
* module/system/repl/command.scm:
* module/system/repl/repl.scm: Update to use current-language parameter
and parameterize.
* libguile/objcodes.c: Change to expect objcode on disk to be embedded
in ELF instead of having the funky cookie.
(to_native_order): Use already existing SCM_BYTE_ORDER style byte
order instead of chars.
(bytecode_to_objcode): No need for word_size arg.
(scm_bytecode_to_objcode, scm_objcode_to_bytecode): Take optional
endianness arg instead of sometimes using target-endianness.
(scm_load_objcode, scm_write_objcode, scm_bytecode_to_native_objcode):
Remove.
* libguile/objcodes.h: Adapt.
* libguile/vm.c (scm_load_compiled_with_vm): Use
scm_load_thunk_from_file.
(make_boot_program): Adapt to use scm_bytecode_to_objcode with
endianness arg.
* module/Makefile.am (OBJCODE_LANG_SOURCES): Add (language objcode
elf).
* module/language/objcode/elf.scm: New module, embeds objcode in ELF.
* module/language/bytecode/spec.scm (compile-objcode):
(decompile-objcode): Use (target-endianness).
* module/language/objcode/spec.scm: use (language objcode elf) for
write-objcode.
* module/scripts/disassemble.scm (disassemble):
* module/system/repl/command.scm (disassemble-file): Use
load-thunk-from-file.
* module/system/vm/objcode.scm: Remove load-objcode and write-objcode.
* test-suite/tests/asm-to-bytecode.test (test-target): Adapt to the new
ELF world.
* module/system/repl/command.scm (language): Set the
*current-language*.
* module/system/repl/repl.scm (start-repl): Create a new dynamic scope
for *current-language*.
* module/system/repl/common.scm (make-repl): Fix to accept language
objects in addition to symbols. Fixes http://debbugs.gnu.org/9857.
Thanks to Tristan Colgate for the report.
* module/system/repl/command.scm (time): Use the high-precision timers
instead of stime(2). Changes the output format of `,time' too;
perhaps there is a better way.
* module/system/repl/server.scm (run-server): Ignore SIGPIPE when we run
a server, as otherwise a rudely disconnected client could cause the
server to quit. Thanks to John Proctor for the report, and Detlev
Zundel for the debugging.
* module/language/objcode/spec.scm (decompile-value): Don't assume that
`error' will handle format strings appropriately.
* module/system/repl/command.scm (disassemble): A more human error when
you disassemble a non-procedure.
Bug reported by Andrew Horton.
* module/system/repl/error-handling.scm (call-with-error-handling):
Do _not_ enter the debugger if the thrown key is in `pass-keys'.
Previously, for example, (throw 'quit) entered the debugger when run
from the REPL, despite the fact that 'quit is in `pass-keys'.
* module/system/repl/command.scm:
* module/system/repl/debug.scm (terminal-width): Move terminal-width
here, make it thread-local, and export it.
(print-locals, print-frame, print-frames): Default width to
terminal-width.
* module/system/repl/error-handling.scm (call-with-error-handling): Add
`report' and `backtrace' on-error handlers.
* module/system/repl/common.scm (repl-default-options): Add on-error
REPL option, defaulting to `debug', but which may be changed.
* module/system/repl/repl.scm (run-repl): Pass the #:on-error REPL
option to call-with-error-handling.
* module/system/repl/command.scm (terminal-width): New parameter that
will use the true terminal width if unset.
(backtrace, locals): Default to (terminal-width).
(width): Simplify.
This meta-command allows one to set the default number of columns
that output from ,backtrace and ,locals shall occupy.
* doc/ref/scheme-using.texi (Debug Commands): document ,width
* module/system/repl/command.scm (*width*): new var
(backtrace, locals): use *width* in optarg
(width): new meta-command
* module/system/repl/repl.scm (read-comment, read-scheme-line-comment)
(read-scheme-datum-comment): New helpers.
(meta-reader): Take a language instead of a reader. If we have a
nonwhitespace char, first check to see that it's a comment, and if so,
read it off and loop.
(prompting-meta-read): Call meta-reader with the lang.
* module/system/repl/repl.scm (flush-leading-whitespace): Rename from
next-char.
(meta-reader): Use flush-leading-whitespace.
(run-repl): Use flush-to-newline after the evaluation, which seems to
be the same as what we did before.
* module/system/repl/repl.scm (flush-all-input): New helper.
(prompting-meta-read): Flush all input on a read error, as we could be
within some expression or a string or something.
* module/system/repl/error-handling.scm (error-string): Just use
print-exception instead of rolling our own printer.
(call-with-error-handling): Simplify.
* module/system/repl/error-handling.scm (display-syntax-error)
(error-string): Until we get the exception-printing patch merged in,
copy display-syntax-error into error-handling so that we avoid
display-error. Fixes bug 32365.
* module/system/repl/command.scm (warranty, copying, version): Use
`define-meta-command' to define these procedures, so they are entered
into the *command-infos* table.
