* libguile/continuations.h:
* libguile/continuations.c: Reimplement continuations and the call_cc
stub as RTL programs.
* libguile/programs.c (scm_i_rtl_program_minimum_arity): Add a case for
continuations.
* libguile/vm-engine.c (rtl_vm_debug_engine): Always call the abort
continuation hook with the number of non-procedure locals. Fix
compose-continuation argument count. Enable call/cc.
* libguile/vm-engine.c (bind-rest): If the sp is below the dst reg,
alloc the frame to ensure there is enough space, and to fill in
intermediate values with SCM_UNDEFINED.
* libguile/vm-engine.c (prompt): Adapt to explicitly set the saved SP so
we know how many incoming values the handler will receive, and to make
escape-only? a flag.
* module/language/cps/compile-rtl.scm (emit-rtl-sequence): $prompt
should only be found in a "seq" context, as it just pushes on a prompt
and doesn't bind any values. On the other hand it should emit
appropriate code for the handler to bind its values, so do that.
* module/language/cps/slot-allocation.scm ($cont-allocation): Add a note
that proc-slot is used by prompts as well.
(allocate-slots): Compute the allocation of a prompt handler's args.
* module/language/tree-il/compile-cps.scm (convert): Use "unwind"
instead of the nonexistent "pop-prompt".
* module/system/vm/disassembler.scm (code-annotation): Adapt to change
in prompt VM op.
* libguile/vm-engine.c (receive-values): Add an ALLOW-EXTRA? flag in
unused bits of the third word. Without it, receive-values will check
for the exact number of incoming values.
* libguile/vm.c (vm_error_wrong_number_of_values): New error case.
* module/language/cps/compile-rtl.scm (emit-rtl-sequence): Adapt to add
the ALLOW-EXTRA? flag.
* libguile/vm-engine.c (return-values): Remove NVALUES operand.
Don't reset the frame.
* test-suite/tests/rtl.test ("cached-toplevel-set!"): Adapt to the fact
that 'return-values' has no operand now, and that 'reset-frame' must
be done first.
* libguile/instructions.c (FOR_EACH_INSTRUCTION_WORD_TYPE): Allow for
five-word instructions, and for new instruction word types.
* libguile/vm-engine.c (RETURN_ONE_VALUE): Instead of returning the
value in the fixed part of the call frame, return it in the same place
multiple-value returns go: from slot 1.
(BR_ARITHMETIC): Allow arithmetic tests to be negated.
(rtl_vm_engine): Change calling convention to use the same location
for single and multiple-value returns. Renumber all instructions.
(halt, halt/values): Fold into a single instruction (halt).
(call): Take the location of the procedure instead of the location of
the call frame. Also take the number of args, and reset the sp before
jumping to the procedure, so as to indicate the number of arguments.
(call/values): Remove, as the new calling convention has RA == MVRA.
(tail-call): Require the procedure to be shuffled down already, and
take "nlocals" as an arg instead of "nargs".
(receive, receive-values): New instructions, for receiving returned
values from calls.
(return-values): Rename from return/values. Remove "values".
(alloc-frame): Rename from reserve-locals.
(reset-frame): New instruction.
(drop-locals): Remove.
(br-if-=, br-if-<, br-if-<=): Allow these instructions to be
negatable.
(br-if->, br-if->=): Remove. Probably a bad idea, given NaN.
(box-ref): Don't bother trying to do a reverse lookup -- the
toplevel-box, module-box, and resolve instructions should handle
that.
(resolve): Add arg to check that the variable is bound.
(toplevel-box, module-box): New instructions, replacing toplevel-ref,
toplevel-set, module-ref, and module-set.
* libguile/vm.c (rtl_boot_continuation_code, rtl_values_code): Adapt to
instruction set changes.
* module/Makefile.am: Make the assembler and disassembler dependent on
vm-operations.h.
* module/system/vm/assembler.scm:
* module/system/vm/disassembler.scm: Adapt to instruction changes and
new instruction word kinds.
* test-suite/tests/rtl.test: Adapt to instruction set changes.
* libguile/vm-engine.c (INUM_MIN, INUM_MAX): Redefine without making
assumptions about the representation.
(INUM_STEP): New macro.
(add1, sub1): Avoid signed overflows, and use INUM_STEP.
* libguile/struct.h:
* libguile/struct.c (scm_allocate_struct): New interface: allocates a
struct.
* libguile/vm-engine.c (allocate_struct): Instead of make-struct with a
rest arg, separate allocation from initialization.
* libguile/vm-engine.c (push_frame, call): Separate out push_frame from
call, and expect the caller to arrange the proc and arguments.
* test-suite/tests/rtl.test ("call"): Update tests.
* libguile/vm-engine.c: Change the RTL VM to number the procedure as
local 0, and other locals from 1. In the future we will want the FP
to point to local 0 instead of local 1. In the future also we can
elide the procedure for well-known closures (closures in which all
references are known call sites).
(make_closure, free_set): Instead of taking rest arguments, we add a
new free-set! op that initializes closures.
(free_ref): Take the closure as an argument.
* libguile/vm.c (rtl_boot_continuation_code): Remove comments, which
were out of date.
(rtl_apply_code, rtl_values_code): Update comments.
* module/system/vm/assembler.scm (intern-constant, emit-init-constants):
Adapt to locals numbering change.
(begin-kw-arity): For assert-nargs-ee purposes, nreq includes the
procedure.
* module/system/vm/disassembler.scm (code-annotation): Adapt annotation
for assert-nargs-ee/locals.
* test-suite/tests/rtl.test: Adapt tests.
* libguile/dynstack.h (SCM_DYNSTACK_TYPE_WITH_FLUID): Rename from
with-fluids.
* libguile/dynstack.c (scm_dynstack_push_fluid):
(scm_dynstack_unwind_fluid): Change API to only wind/unwind one
fluid binding.
(WITH_FLUID_WORDS): New define, always 2 words (fluid and value box).
(WITH_FLUID_FLUID, WITH_FLUID_VALUE_BOX): New macros to get offsets of
fluid and value box.
(scm_dynstack_push_rewinder, scm_dynstack_push_unwinder): Use
WINDER_WORDS.
(scm_dynstack_push_dynwind): Use DYNWIND_WORDS.
(scm_dynstack_wind_1): Update for scm_swap_fluid API change.
* libguile/fluids.h:
* libguile/fluids.c (scm_prepare_fluids): Remove; no longer needed.
(scm_swap_fluid): Update to just swap one fluid binding.
(scm_c_with_fluids, scm_c_with_fluid): Update to use
scm_dynstack_push_fluid.
* libguile/memoize.c (do_push_fluid, do_pop_fluid): Adapt to API
change.
* libguile/vm-engine.c (rtl_vm_engine): Change wind-fluids / unwind-fluids
to push-fluid / pop-fluid, and actually enable. Woo!
* libguile/vm-i-system.c (push-fluid, pop-fluid): Update to new API.
* libguile/vm-engine.c (rtl_vm_engine): Add new VM.
(vm_engine): Add support for calling RTL programs.
* libguile/tags.h (scm_tc7_rtl_program): New type for procedures that
run on the new VM.
* libguile/evalext.c (scm_self_evaluating_p):
* libguile/goops.c (scm_class_of):
* libguile/print.c (iprin1):
* libguile/procprop.c (scm_i_procedure_arity):
* libguile/procs.c (scm_procedure_p): Add hooks for the new tc7.
* libguile/programs.h:
* libguile/programs.c (scm_make_rtl_program, scm_i_rtl_program_print)
(scm_rtl_program_p, scm_rtl_program_code):
* module/system/vm/program.scm: Add constructors and accessors for the
new "RTL programs".
* libguile/vm.c (rtl_boot_continuation): Define a boot program.
(rtl_apply, rtl_values): New static RTL programs.
* libguile/frames.c (scm_frame_num_locals): Adapt for frames of RTL
programs.
* libguile/frames.h: Add description of RTL frames.
* libguile/Makefile.am: Add rules to generate vm-operations.h.
* .gitignore: Ignore vm-operations.h.
* module/system/vm/instruction.scm:
* libguile/instructions.c:
* libguile/instructions.h: Use vm-operations.h to define enumerated
values for the new RTL opcodes. Define some helper macros to pack and
unpack 32-bit instruction words.
(rtl-instruction-list): New function, exported by (system vm
instruction).
* libguile/objcodes.c: Wire up the bits needed to detect the new RTL
bytecode and load it, as appropriate.
* libguile/vm-engine.c:
* libguile/vm-i-scheme.c:
* libguile/vm-i-system.c: CPP hygiene: the code that #defines, #undefs.
Makes things cleaner given the multiple inclusion dance we do.
* doc/ref/api-debug.texi (VM Hooks): Update documentation.
* libguile/vm.c (vm_dispatch_hook):
* libguile/vm-engine.c: Rework the hook machinery so that they can
receive an arbitrary number of arguments. The return and abort
hooks will pass the values that they return to their continuations.
(vm_engine): Adapt to ABORT_CONTINUATION_HOOK change.
* libguile/vm-i-system.c (return, return/values): Adapt to
POP_CONTINUATION_HOOK change.
* module/system/vm/frame.scm (frame-return-values): Remove. The
pop-continuation-hook will pass the values directly.
* module/system/vm/trace.scm (print-return):
(trace-calls-to-procedure):
(trace-calls-in-procedure): Update to receive return values
directly.
* module/system/vm/traps.scm (trap-in-procedure)
(trap-in-dynamic-extent): Ignore return values.
(trap-frame-finish, trap-calls-in-dynamic-extent)
(trap-calls-to-procedure): Pass return values to the handlers.
* libguile/vm-engine.c: Remove the register assignments inherited from
the 1990s. GCC does seem to allocate reasonably on systems with
enough registers (e.g. x86-64), and on system with too few (ia32) we
disabled manual allocation. Anyway this code was never tested, so
it's better to leave the compiler to do its own thing, until proven
otherwise. Also in the RTL VM we don't need to allocate a register to
the SP, because it isn't accessed as much.
* libguile/vm-engine.c: Remove the ability for the VM to check object
access, free variable access, and the ip. They were off by default.
Since they will be different in the RTL VM, their presence is just
making things confusing.
* libguile/vm.c: Remove corresponding error helpers.
* libguile/frames.c (scm_frame_instruction_pointer):
* module/system/vm/frame.scm (frame-bindings):
(frame-next-source, frame-call-representation): Fix a few locations
that thought that the frame-procedure will always be a VM
procedure. This will not not be the case when traversing the stack of
an application of a non-procedure.
* libguile/vm-i-system.c (call, tail-call, mv-call): Instead of
special-casing structs and smobs at these call sites, just set up the
stack, and jump to a generic apply loop if the proc is not a program.
* libguile/vm-engine.c: The generic apply loop is here. Also, the boot
program is now simply a boot continuation, and can handle any number
of arguments.
* libguile/vm.c (make_boot_program): Update the code that makes the boot
continuation.
* libguile/vm.c:
(vm_error):
(vm_error_bad_instruction):
(vm_error_unbound):
(vm_error_unbound_fluid):
(vm_error_not_a_variable):
(vm_error_not_a_thunk):
(vm_error_apply_to_non_list):
(vm_error_kwargs_length_not_even):
(vm_error_kwargs_invalid_keyword):
(vm_error_kwargs_unrecognized_keyword):
(vm_error_too_many_args):
(vm_error_wrong_num_args):
(vm_error_wrong_type_apply):
(vm_error_stack_overflow):
(vm_error_stack_underflow):
(vm_error_improper_list):
(vm_error_not_a_pair):
(vm_error_not_a_bytevector):
(vm_error_not_a_struct):
(vm_error_no_values):
(vm_error_not_enough_values):
(vm_error_continuation_not_rewindable):
(vm_error_bad_wide_string_length):
(vm_error_invalid_address):
(vm_error_object):
(vm_error_free_variable): New internal helpers, implementing VM error
handling.
* libguile/vm-engine.h (VM_ASSERT): New helper macro.
(ASSERT, CHECK_OBJECT, CHECK_FREE_VARIABLE):
(PRE_CHECK_UNDERFLOW, PUSH_LIST): Use the new helper.
* libguile/vm-i-loader.c:
* libguile/vm-i-scheme.c:
* libguile/vm-i-system.c: Use VM_ASSERT and the out-of-line error
handlers.
* libguile/vm-engine.c (vm_engine): Remove inline error handlers, and
remove a couple of local vars. Use VM_ASSERT. Have halt handle the
return itself.
* libguile/control.h: Remove scm_t_prompt_registers and
scm_c_make_prompt_registers.
(scm_c_abort): Take a pointer to a jmpbuf instead of a cookie. It
will serve the same purpose.
* libguile/control.c (reify_partial_continuation, scm_at_abort): Adapt
to new prompt representation.
* libguile/dynstack.h:
* libguile/dynstack.c (scm_dynstack_push_prompt): Prompts now have 5
words instead of 2, as they now push the fp, sp, ip, and jmpbuf on the
stack separately. This avoids allocation.
(scm_dynstack_find_prompt): Likewise, add return values for fp, sp,
etc.
(scm_dynstack_wind_prompt): Replaces scm_dynstack_relocate_prompt.
* libguile/eval.c (eval):
* libguile/stacks.c (find_prompt):
* libguile/throw.c (pre_init_catch): Adapt to the new prompt mechanism.
* libguile/vm-engine.c (vm_engine): Setjmp an on-stack jmpbuf every time
the VM enters. We can then re-use that jmpbuf for all prompts in that
invocation.
* libguile/vm-i-system.c (partial_cont_call): Adapt to change in prompt
representation. We don't need to wind here any more, since we pass in
the prompt's jmpbuf.
(prompt): Adapt to scm_dynstack_push_prompt change.
(abort): Adapt to vm_abort change.
* libguile/vm.h (struct scm_vm): No more cookie.
* libguile/vm.c (vm_abort): Adapt to scm_c_abort change.
(vm_reinstate_partial_continuation): Rewind the dynamic stack here,
now that we do have a valid jmpbuf.
(make_vm): No need to initialize a cookie.
* libguile/vm-i-system.c (wind):
* module/language/tree-il/compile-glil.scm (flatten-lambda-case):
Instead of making `wind' call `scm_thunk_p' on the winder and unwinder
at runtime, make it the responsibility of the compiler to emit code to
call thunk? and error, but only if the compiler cannot prove them to
be thunks.
* libguile/vm-engine.c (vm_engine): Remove a now-unused error block.
* libguile/vm-engine.c (VM_NAME)[HAVE_LABELS_AS_VALUES]: Rename
`jump_table' to `jump_table_pointer'. Add `jump_table' as a local
variable, initialize it.
* libguile/vm-engine.h (JT_REG): New macro.
* libguile/__scm.h (SCM_ASYNC_TICK_WITH_CODE): Redefine to take a
scm_i_thread* as well. OK to do because it's within a
BUILDING_LIBGUILE block.
* libguile/vm-engine.c (vm_engine): Cache the scm_i_thread* instead of
the dynstate, so we can use the thread for ticks.
* libguile/vm-engine.h (VM_HANDLE_INTERRUPTS): Tick with the
scm_i_thread* local var, to avoid excessive tls calls.
* libguile/vm-i-system.c: Fix dynstate users to use
current_thread->dynamic_state.
* libguile/vm-engine.c (VM_CHECK_OBJECT, VM_CHECK_FREE_VARIABLES): Set
to 0 for both engines. These are really internal debugging variables,
which don't affect user-visible features, provided that the compiler
is correct of course.
(VM_CHECK_UNDERFLOW): New var, also off by default: whether to check
for stack underflow when popping values.
(vm_engine): Don't declare object_count if we are not checking object
table accesses.
* libguile/vm-engine.h (CACHE_PROGRAM): Don't muck with object_count
if we are not checking object table accesses.
(CHECK_UNDERFLOW, PRE_CHECK_UNDERFLOW): Nop out if we are not checking
underflow.
(POP2, POP3): New macros which check for underflow before popping more
than one value.
* libguile/vm-i-loader.c (load_array):
* libguile/vm-i-scheme.c (set_car, set_cdr, vector_set, slot_set)
(BV_SET_WITH_ENDIANNESS, BV_FIXABLE_INT_SET, BV_INT_SET)
(BV_FLOAT_SET):
* libguile/vm-i-system.c (partial_cont_call, fix_closure, prompt)
(fluid_set): Use POP2 / POP3.
(local_set, long_local_set): Pop to locals instead of using values on
the stack then dropping; allows for underflow to be checked before the
value is accessed.
(BR): Don't NULLSTACK or DROP after the operation.
(br_if, br_if_not, br_if_eq, br_if_not_eq, br_if_null)
(br_if_not_null): Pop to locals before doing the compare and jump.
* libguile/vm-i-system.c (new-frame): Though it was appealing to set the
dynamic link here on the incomplete frame, we no longer do that, for
the reasons mentioned in the code.
(call, mv-call): Adapt to set the frame's dynamic link.
* libguile/vm-engine.c (vm_engine): Don't set dynamic link here, even
for boot program.
* libguile/frames.c (scm_frame_num_locals, scm_frame_local_ref)
(scm_frame_local_set_x): Fix up not-yet-active frame detection.
* libguile/vm-i-system.c (variable-ref, variable-set, variable-bound?):
Check that the argument is actually a variable. Thanks to Kevin
Holmes for the report.
* libguile/vm-engine.c (vm_engine): Error handling down here.
* THANKS: Update.
* libguile/fluids.c (scm_make_undefined_fluid, scm_fluid_unset_x)
(scm_fluid_bound_p): New functions.
(fluid_ref): New function; like scm_fluid_ref, but will not throw an
error for unbound fluids.
(scm_fluid_ref, swap_fluid): Use `fluid_ref'.
* libguile/fluids.h (scm_make_undefined_fluid, scm_fluid_unset_x)
(scm_fluid_bound_p): New prototypes.
* libguile/vm-i-system.c (fluid_ref): If fluid is unbound, jump to
`vm_error_unbound_fluid'.
* libguile/vm-engine.c (VM_NAME)[vm_error_unbound_fluid]: New error
message.
* test-suite/tests/fluids.test ("unbound fluids")["fluid-ref of unbound
fluid", "fluid-bound? of bound fluid", "fluid-bound? of unbound
fluid", "unbound fluids can be set", "bound fluids can be unset"]: New
tests.
* libguile/vm-i-system.c (variable-ref, toplevel-ref)
(long-toplevel-ref): Fixup callers.
* libguile/vm-engine.c (vm_error_unbound): Don't use vm-error for
unbound vars, use misc-error. Don't include VM: in the string. Take
the name directly in finish_args, not as a list.
* libguile/vm.h (SCM_VM_PUSH_CONTINUATION_HOOK)
(SCM_VM_POP_CONTINUATION_HOOK): New hooks, to replace
enter/exit/return.
(SCM_VM_BOOT_HOOK, SCM_VM_HALT_HOOK, SCM_VM_BREAK_HOOK): Remove these
useless hooks.
* libguile/vm.c (scm_vm_push_continuation_hook)
(scm_vm_pop_continuation_hook): New accessors.
* libguile/vm-i-system.c: Remove boot, halt, break, enter, exit, and
return hooks. Also remove the break instruction. Instead now when we
push a new continuation onto the stack we call PUSH_CONTINUATION_HOOK,
and when we pop via a return we call POP_CONTINUATION_HOOK. APPLY_HOOK
is now decoupled from continuation pushes and pops.
* libguile/vm-engine.h:
* libguile/vm-engine.c: Adapt for hooks.
* module/system/vm/trace.scm (vm-trace): Adapt for hooks. Also revive
the #:instructions? #t mode.
* module/system/vm/vm.scm: Adapt exports for new set of hooks.
* libguile/vm-engine.c (VM_NAME)[vm_error_unbound]: Add comment.
* libguile/vm-i-system.c (variable_ref): Attempt provide the name of X
in FINISH_ARGS.
