* libguile/tags.h: Elide the SCM_DEBUG_TYPING_STRICTNESS==1 case.
Instead just have a flag, SCM_USING_PREHISTORIC_COMPILER, which if set
uses what was SCM_DEBUG_TYPING_STRICTNESS==0.
* libguile/__scm.h: Remove SCM_DEBUG_TYPING_STRICTNESS block.
* libguile/__scm.h (SCM_ASYNC_TICK_WITH_CODE): Redefine to take a
scm_i_thread* as well. OK to do because it's within a
BUILDING_LIBGUILE block.
* libguile/vm-engine.c (vm_engine): Cache the scm_i_thread* instead of
the dynstate, so we can use the thread for ticks.
* libguile/vm-engine.h (VM_HANDLE_INTERRUPTS): Tick with the
scm_i_thread* local var, to avoid excessive tls calls.
* libguile/vm-i-system.c: Fix dynstate users to use
current_thread->dynamic_state.
* libguile/__scm.h (SCM_ASYNC_TICK): Add some branch prediction.
(SCM_ASYNC_TICK_WITH_CODE): New helper for when BUILDING_LIBGUILE,
runs code only if we're going to call async_click().
* libguile/vm-engine.h (VM_HANDLE_INTERRUPTS): New helper, uses
SCM_ASYNC_TICK_WITH_CODE to only save regs if we'll handle an
interrupt.
* libguile/vm-i-system.c (call, goto/args, return): use
VM_HANDLE_INTERRUPTS.
* configure.ac: Check for `intptr_t' and `uintptr_t'. Substitute
`SCM_I_GSC_T_INTPTR' and `SCM_I_GSC_T_UINPTR'.
* libguile/__scm.h (SCM_T_UINTPTR_MAX, SCM_T_INTPTR_MIN,
SCM_T_INTPTR_MAX): New macros.
* libguile/_scm.h (SIZEOF_SCM_T_BITS): New macro.
* libguile/gen-scmconfig.c (main): Produce typedefs for `scm_t_intptr'
and `scm_t_uintptr'.
* libguile/gen-scmconfig.h.in (SCM_I_GSC_T_INTPTR, SCM_I_GSC_T_UINPTR):
New macros.
* libguile/tags.h: Don't check for `HAVE_INTTYPES_H' and
`HAVE_STDINT_H'; don't include <inttypes.h> nor <stdint.h>.
(scm_t_signed_bits, scm_t_bits): Define unconditionally as aliases for
`scm_t_intptr' and `scm_t_uintptr', respectively.
(SCM_T_SIGNED_BITS_MAX, SCM_T_SIGNED_BITS_MIN, SCM_T_BITS_MAX):
Likewise.
(SIZEOF_SCM_T_BITS): Remove.
The intent is to allow compilation with `-Wundef', which in turn should
make it easier to catch erroneous uses of nonexistent macros.
* libguile/__scm.h: Don't assume `BUILDING_LIBGUILE' is defined.
* libguile/conv-uinteger.i.c (SCM_TO_TYPE_PROTO): Remove unneeded CPP
conditional on `TYPE_MIN == 0'.
* libguile/fports.c: Check for the definition of `HAVE_CHSIZE' and
`HAVE_FTRUNCATE', not for their value.
* libguile/ports.c: Likewise.
* libguile/numbers.c (guile_ieee_init): Likewise with `HAVE_DINFINITY'
and `HAVE_DQNAN'.
* test-suite/standalone/test-conversion.c (ieee_init): Likewise.
* libguile/strings.c: Likewise with `SCM_STRING_LENGTH_HISTOGRAM'.
* libguile/strings.h: Likewise.
* libguile/tags.h: Likewise with `HAVE_INTTYPES_H' and `HAVE_STDINT_H'.
* libguile/threads.c: Likewise with `HAVE_PTHREAD_GET_STACKADDR_NP'.
* libguile/vm-engine.c (VM_NAME): Likewise with `VM_CHECK_IP'.
* libguile/gen-scmconfig.c (main): Use "#ifdef HAVE_", not "#if HAVE_".
* libguile/socket.c (scm_setsockopt): Likewise.
* libguile/__scm.h (scm_async_tick): New declaration.
(SCM_ASYNC_TICK)[!BUILDING_LIBGUILE]: Use `scm_async_tick ()'.
* libguile/async.c (scm_critical_section_start,
scm_critical_section_end, scm_async_tick): New functions.
* libguile/async.h (scm_i_critical_section_mutex): Made internal.
(scm_critical_section_start, scm_critical_section_end): New
declarations.
(SCM_CRITICAL_SECTION_START,
SCM_CRITICAL_SECTION_END)[!BUILDING_LIBGUILE]: Use the same-named
function (lower-case).
* libguile/stackchk.h (SCM_STACK_OVERFLOW_P): Conditionalize on
`BUILDING_LIBGUILE'.
* libguile/threads.h (SCM_I_CURRENT_THREAD, scm_i_dynwinds,
scm_i_set_dynwinds, scm_i_last_debug_frame,
scm_i_set_last_debug_frame): Conditionalize on `BUILDING_LIBGUILE'.
Problem was that if an application includes both libguile.h and the
system's setjmp.h, and is compiled on IA64, it gets compile errors
because of jmp_buf, setjmp and longjmp being multiply defined.
* libguile/__scm.h (__ia64__): Define scm_i_jmp_buf, SCM_I_SETJMP and
SCM_I_LONGJMP instead of jmp_buf, setjmp and longjmp.
(all other platforms): Map scm_i_jmp_buf, SCM_I_SETJMP and
SCM_I_LONGJMP to jmp_buf, setjmp and longjmp.
* libguile/continuations.c (scm_make_continuation): Use `SCM_I_SETJMP'
instead of `setjmp'.
(copy_stack_and_call): Use `SCM_I_LONJMP' instead of `longjmp'.
(scm_ia64_longjmp): Use type `scm_i_jmp_buf' instead of `jmp_buf'.
* libguile/continuations.h (scm_t_contregs): Use type `scm_i_jmp_buf'
instead of `jmp_buf'.
* libguile/threads.c (suspend): Use `SCM_I_SETJMP' instead of
`setjmp'.
* libguile/threads.h (scm_i_thread): Use type `scm_i_jmp_buf' instead
of `jmp_buf'.
* libguile/throw.c (JBJMPBUF, make_jmpbuf, jmp_buf_and_retval): Use
type `scm_i_jmp_buf' instead of `jmp_buf'.
(scm_c_catch): Use `SCM_I_SETJMP' instead of `setjmp'.
(scm_ithrow): Use `SCM_I_LONGJMP' instead of `longjmp'.
The symbol's characters are only accessed in case they are needed
for an error message. This can be avoided by passing the symbol
all the way to a error message function.
* libguile/__scm.h (SCM_WTA_DISPATCH_1_SUBR): new macro
* libguile/error.c (scm_i_wrong_type_arg_symbol): new error function
* libguile/error.h: declaration of scm_i_wrong_type_arg_symbol
* libguile/eval.c (call_dsubr_1): use new macro SCM_WTA_DISPATCH_1_SUBR
to avoid having to unpack the symbol's chars
* libguile/eval.i.c: use new macro SCM_WTA_DISPATCH_1_SUBR
* libguile/__scm.h (SCM_API, SCM_INTERNAL): Take the reverse strategy: symbols will
be hidden by default, and only exported with SCM_API. In addition to working
on Mac OS, it has the several nice efficiency benefits on Linux, and unifies
codepaths with Win32.
* libguile/Makefile.am: Define BUILDING_LIBGUILE when building Guile.
The idea is to introduce `gsubrs' whose arity is encoded in their type
(more precisely in the sizeof (void *) - 8 MSBs). This removes the
indirection introduced by cclos and simplifies the code.
* libguile/__scm.h (CCLO): Remove.
* libguile/debug.c (scm_procedure_source, scm_procedure_environment):
Remove references to `scm_tc7_cclo'.
* libguile/eval.c (scm_trampoline_0, scm_trampoline_1,
scm_trampoline_2): Replace `scm_tc7_cclo' with `scm_tc7_gsubr'.
* libguile/eval.i.c (CEVAL): Likewise. No longer make PROC the first
argument. Directly invoke `scm_gsubr_apply ()' instead of jump to the
`evap(N+1)' label or call to `SCM_APPLY ()'.
* libguile/evalext.c (scm_self_evaluating_p): Remove reference to
`scm_tc7_cclo'.
* libguile/gc-card.c (scm_i_sweep_card, scm_i_tag_name): Likewise.
* libguile/gc-mark.c (scm_gc_mark_dependencies): Likewise.
* libguile/goops.c (scm_class_of): Likewise.
* libguile/print.c (iprin1): Likewise.
* libguile/gsubr.c (create_gsubr): Use `unsigned int's for REQ, OPT and
RST. Use `scm_tc7_gsubr' instead of `scm_makcclo ()' in the default
case.
(scm_gsubr_apply): Remove calls to `SCM_GSUBR_PROC ()'.
(scm_f_gsubr_apply): Remove.
* libguile/gsubr.h (SCM_GSUBR_TYPE): New definition.
(SCM_GSUBR_MAX): Changed to 33.
(SCM_SET_GSUBR_TYPE, SCM_GSUBR_PROC, SCM_SET_GSUBR_PROC,
scm_f_gsubr_apply): Remove.
* libguile/procprop.c (scm_i_procedure_arity): Remove reference to
`scm_tc7_cclo'; add proper handling of `scm_tc7_gsubr'.
* libguile/procs.c (scm_makcclo, scm_make_cclo): Remove.
(scm_procedure_p): Remove reference to `scm_tc7_cclo'.
(scm_thunk_p): Likewise, plus add proper `scm_tc7_gsubr' handling.
* libguile/procs.h (SCM_CCLO_LENGTH, SCM_MAKE_CCLO_TAG,
SCM_SET_CCLO_LENGTH, SCM_CCLO_BASE, SCM_SET_CCLO_BASE, SCM_CCLO_REF,
SCM_CCLO_SET, SCM_CCLO_SUBR, SCM_SET_CCLO_SUBR, scm_makcclo,
scm_make_cclo): Remove.
* libguile/stacks.c (read_frames): Remove reference to `scm_f_gsubr_apply'.
* libguile/tags.h (scm_tc7_cclo): Remove.
(scm_tc7_gsubr): New.
(scm_tcs_subrs): Add `scm_tc7_gsubr'.
* libguile/__scm.h (SCM_ALIGNED): New macro.
* libguile/_scm.h: Include "libguile/strings.h", to make the
string/stringbuf-related constants visible to snarffed code.
* libguile/snarf.h (SCM_SUPPORT_STATIC_ALLOCATION): New macro.
(SCM_SYMBOL, SCM_GLOBAL_SYMBOL)[SCM_SUPPORT_STATIC_ALLOCATION]: New
alternative versions of these macros with support for (almost) static
allocation via the use of `string->symbol'.
(SCM_IMMUTABLE_DOUBLE_CELL, SCM_IMMUTABLE_STRINGBUF,
SCM_IMMUTABLE_STRING): New macros.
* libguile/tags.h (SCM)[SCM_DEBUG_TYPING_STRICTNESS==1]: Use a pointer
type that is compatible with other pointer types, to avoid potential
violation of strict aliasing rules.
* libguile/__scm.h (SCM_DEBUG): add SCM_DEBUG_MARKING_API
* libguile/gc.h (SCM_SET_GC_MARK): depending on
SCM_DEBUG_MARKING_API crash if someone is touching markbits
outside regular hours.
Rename ensure_marking() to scm_i_ensure_marking().
* libguile/inline.h (scm_double_cell, scm_cell): only set mark bits
for debugging if SCM_DEBUG_MARKING_API is unset
* libguile/gc-mark.c: Issue deprecation warning if we are marking
outside of the GC mark phase.
* Specific problems in IA64 make check
** test-unwind
Representation of the relevant dynamic context:
non-rewindable
catch frame make cont.
o----o-----a----------b-------------c
\
\ call cont.
o-----o-----------d
A continuation is captured at (c), with a non-rewindable frame in the
dynamic context at (b). If a rewind through that frame was attempted,
Guile would throw to the catch at (a). Then the context unwinds back
past (a), then winds forwards again, and the captured continuation is
called at (d).
We should end up at the catch at (a). On ia64, we get an "illegal
instruction".
The problem is that Guile does not restore the ia64 register backing
store (RBS) stack (which is saved off when the continuation is
captured) until all the unwinding and rewinding is done. Therefore,
when the rewind code (scm_i_dowinds) hits the non-rewindable frame at
(b), the RBS stack hasn't yet been restored. The throw finds the
jmp_buf (for the catch at (a)) correctly from the dynamic context, and
jumps back to (a), but the RBS stack is invalid, hence the illegal
instruction.
This could be fixed by restoring the RBS stack earlier, at the same
point (copy_stack) where the normal stack is restored. But that
causes a problem in the next test...
** continuations.test
The dynamic context diagram for this case is similar:
non-rewindable
catch frame make cont.
a----x-----o----------b-------------c
\
\ call cont.
o-------d
The only significant difference is that the catch point (a) is
upstream of where the dynamic context forks. This means that the RBS
stack at (d) already contains the correct RBS contents for throwing
back to (a), so it doesn't matter whether the RBS stack that was saved
off with the continuation gets restored.
This test passes with the Guile 1.8.4 code, but fails (with an
"illegal instruction") when the code is changed to restore the RBS
stack earlier as described above.
The problem now is that the RBS stack is being restored _too_ early;
specifically when there is still stuff to do that relies on the old
RBS contents. When a continuation is called, the sequence of relevant
events is:
(1) Grow the (normal) stack until it is bigger than the (normal)
stack saved off in the continuation. (scm_dynthrow, grow_stack)
(2) scm_i_dowinds calls itself recursively, such that
(2.1) for each rewind (from (x) to (c)) that will be needed,
another frame is added to the stack (both normal and RBS),
with local variables specifying the required rewind; the
rewinds don't actually happen yet, they will happen when
the stack unwinds again through these frames
(2.2) required unwinds - back from where the continuation was
called (d) to the fork point (x) - are done immediately.
(3) The normal (i.e. non-RBS) stack that was stored in the
continuation is restored (i.e. copied on top of the actual
stack).
Note that this doesn't overwrite the frames that were added in
(2.1), because the growth in (1) ensures that the added frames
are beyond the end of the restored stack.
(4) ? Restore the RBS stack here too ?
(5) Return (from copy_stack) through the (2.1) frames, which means
that the rewinds now happen.
(6) setcontext (or longjmp) to the context (c) where the
continuation was captured.
The trouble is that step (1) does not create space in the RBS stack in
the same kind of way that it does for the normal stack. Therefore, if
the saved (in the continuation) RBS stack is big enough, it can
overwrite the RBS of the (2.1) frames that still need to complete.
This causes an illegal instruction when we return through those frames
and try to perform the rewinds.
* Fix
The key to the fix is that the saved RBS stack only needs to be
restored at some point before the next setcontext call, and that doing
it as close to the setcontext call as possible will avoid bad
interactions with the pre-setcontext stack. Therefore we do the
restoration at the last possible point, immediately before the next
setcontext call.
The situation is complicated by there being two ways that the next
setcontext call can happen.
- If the unwinding and rewinding is all successful, the next
setcontext will be the one from step (6) above. This is the
"normal" continuation invocation case.
- If one of the rewinds throws an error, the next setcontext will
come from the throw implementation code. (And the one in step (6)
will never happen.) This is the rewind error case.
In the rewind error case, the code calling setcontext knows nothing
about the continuation. So to cover both cases, we:
- copy (in step (4) above) the address and length of the
continuation's saved RBS stack to the current thread state
(SCM_I_CURRENT_THREAD)
- modify all setcontext callers so that they check the current
thread state for a saved RBS stack, and restore it if so before
calling setcontext.
* Notes
** I think rewinders cannot rely on using any stack data
Unless it can be guaranteed that the data won't go into a register.
I'm not 100% sure about this, but I think it follows from the fact
that the RBS stack is not restored until after the rewinds have
happened.
Note that this isn't a regression caused by the current fix. In Guile
1.8.4, the RBS stack was restored _after_ the rewinds, and this is
still the case now.
** Most setcontext calls for `throw' don't need to change the RBS stack
In the absence of continuation invocation, the setcontext call in the
throw implementation code always sets context to a place higher up the
same stack (both normal and RBS), hence no stack restoration is
needed.
* Other changes
** Using setcontext for all non-local jumps (for __ia64__)
Along the way, I read a claim somewhere that setcontext was more
reliable than longjmp, in cases where the stack has been manipulated.
I don't now have any reason to believe this, but it seems reasonable
anyway to leave the __ia64__ code using getcontext/setcontext, instead
of setjmp/longjmp.
(I think the only possible argument against this would be performance -
if getcontext was significantly slower than setjmp. It that proves to
be the case, we should revisit this.)
** Capping RBS base for non-main threads
Somewhere else along the way, I hit a problem in GC, involving the RBS
stack of a non-main thread. The problem was, in
SCM_MARK_BACKING_STORE, that scm_ia64_register_backing_store_base was
returning a value that was massively greater than the value of
scm_ia64_ar_bsp, leading to a seg fault. This is because the
implementation of scm_ia64_register_backing_store_base is only valid
for the main thread. I couldn't find a neat way of getting the true
RBS base of a non-main thread, but one idea is simply to call
scm_ia64_ar_bsp when guilifying a thread, and use the value returned
as an upper bound for that thread's RBS base. (Note that the RBS
stack grows upwards.)
(Were it not for scm_init_guile, we could be much more definitive
about this. We could take the value of scm_ia64_ar_bsp as a
definitive base address for the part of the RBS stack that Guile cares
about. We could also then discard
scm_ia64_register_backing_store_base.)
in terms of properties of scm_t_bits and SCM variables rather than
in terms of c standard types. This is since it is not known which
of the standard types scm_t_bits and SCM variables will be defined
to.
SCM_DEBUG_DEBUGGING_SUPPORT): Renamed macro
SCM_DEBUG_DEBUGGER_SUPPORT to SCM_DEBUG_DEBUGGING_SUPPORT and
generalized it to apply not only to C level functions but also to
scheme level functions.
* debug.c, debug.h, eval.c (make-iloc, scm_make_iloc, iloc?,
scm_iloc_p, dbg-make-iloc, scm_dbg_make_iloc, dbg-iloc?,
scm_dbg_iloc_p): Moved functions scm_make_iloc, scm_iloc_p to
eval.c, made them available under SCM_DEBUG_DEBUGGING_SUPPORT == 1
only and renamed them to scm_dbg_make_iloc, scm_dbg_iloc_p,
respectively.
* deprecated.h, eval.c, eval.h (SCM_ILOC00, SCM_IDINC,
SCM_IDSTMSK): Deprecated. The macro definitions are moved from
eval.h into eval.c and a copy is placed into deprecated.h.
* eval.c, eval.h (SCM_MAKE_ILOC): Removed from eval.h and placed
into eval.c. This definition was not part of the API in any
officially released version of guile and thus does not need to go
through a phase of deprecation.
(void *) in order to avoid an aliasing warning; thanks to Bruce
Korb.)
* stackchk.h (SCM_STACK_OVERFLOW_P): Use SCM_STACK_PTR.
* threads.c (suspend, launch_thread, scm_threads_mark_stacks): Use
SCM_STACK_PTR.
* threads.c (scm_threads_mark_stacks): Bugfix: Changed
thread->base --> t->base.
* eval.c (SCM_CEVAL): Don't cast argument of SCM_STACK_OVERFLOW_P.
* gc.card.c (scm_gc_marked_p): Fixed compiler warning when
compiling with SCM_DEBUG==1 by moving definition behind prototype.
* gc.card.c (scm_dbg_t_list_cell, scm_dbg_t_double_cell,
scm_dbg_gc_marked_p, scm_dbg_gc_get_card, scm_dbg_gc_get_bvec,
scm_t_list_cell_struct, scm_t_list_cell, scm_t_double_cell,
scm_gc_marked_p, scm_gc_get_card, scm_gc_get_bvec): Fixed
functions such that they check if the object is a non-immediate.
Further, renamed identifiers to use the scm_dbg_ prefix and made
their inclusion into the lib dependent of the
SCM_DEBUG_DEBUGGER_SUPPORT compile time option.
