* libguile/bytevectors.c (INTEGER_ACCESSOR_PROLOGUE)
(scm_bytevector_copy_x, bytevector_large_set): Rewrite checks to reliably
detect overflows.
(make_bytevector): Constrain the bytevector length to avoid later
overflows during allocation.
(make_bytevector_from_buffer): Fix indentation.
(scm_bytevector_length): Use 'scm_from_size_t' to convert a 'size_t',
not 'scm_from_uint'.
* libguile/fports.c (fport_seek): Check for overflow before the implicit
conversion of the return value.
* libguile/guardians.c (guardian_print): Use 'scm_from_ulong' to convert
an 'unsigned long', not 'scm_from_uint'.
* libguile/ports.c (scm_unread_string): Change a variable to type 'size_t'.
(scm_seek, scm_truncate_file): Use 'scm_t_off' instead of
'off_t_or_off64_t' to avoid implicit type conversions that could
overflow, because 'ptob->seek' and 'ptob->truncate' use 'scm_t_off'.
* libguile/r6rs-ports.c (bytevector_input_port_seek)
(custom_binary_port_seek, bytevector_output_port_seek): Rewrite offset
calculations to reliably detect overflows. Use 'scm_from_off_t' to
convert a 'scm_t_off', not 'scm_from_long' nor 'scm_from_int'.
(scm_get_bytevector_n_x, scm_get_bytevector_all, scm_unget_bytevector)
(bytevector_output_port_write): Rewrite checks to reliably detect
overflows. Use 'size_t' where appropriate.
(bytevector_output_port_buffer_grow): Rewrite size calculations to
reliably detect overflows. Minor change in the calculation of the new
size: now it is max(min_size, 2*current_size), whereas previously it
would multiply current_size by the smallest power of 2 needed to surpass
min_size.
* libguile/strings.c (make_stringbuf): Constrain the stringbuf length to
avoid later overflows during allocation.
(scm_string_append): Change overflow check to use INT_ADD_OVERFLOW.
* libguile/strports.c (string_port_write): Rewrite size calculations to
reliably detect overflows.
(string_port_seek): Rewrite offset calculations to reliably detect
overflows. Use 'scm_from_off_t' to convert a 'scm_t_off', not
'scm_from_long'.
(string_port_truncate): Use 'scm_from_off_t' to convert a 'scm_t_off',
not 'scm_from_off_t_or_off64_t'.
* libguile/vectors.c (scm_c_make_vector): Change a variable to type
'size_t'.
Partial fix for <https://bugs.gnu.org/33044>.
Reported by Tom de Vries <tdevries@suse.de>.
Fix several instances of the mistake of using 'scm_from_locale_*' for C
strings that originally came from a C string literal. Change several
uses of 'scm_from_latin1_*' as well, to promote the practice of writing
code that works for arbitrary C string literals.
Also add missing years to the copyright notices of changed files, based
on the git history.
* libguile/debug-malloc.c, libguile/deprecation.c, libguile/error.c,
libguile/eval.c, libguile/expand.c, libguile/extensions.c,
libguile/filesys.c, libguile/init.c, libguile/load.c,
libguile/modules.c, libguile/pairs.c, libguile/posix.c,
libguile/print.c, libguile/random.c, libguile/read.c,
libguile/regex-posix.c, libguile/snarf.h, libguile/srfi-13.c,
libguile/stacks.c, libguile/stime.c, libguile/strports.c,
libguile/values.c: Use 'scm_from_utf8_*' where appropriate.
Partial fix for <https://bugs.gnu.org/33044>.
Reported by Tom de Vries <tdevries@suse.de>.
Fix several instances of the mistake of using 'scm_from_locale_*' for C
strings that originally came from a C string literal. Change several
uses of 'scm_from_latin1_*' as well, to promote the practice of writing
code that works for arbitrary C string literals.
Also add missing years to the copyright notices of changed files, based
on the git history.
* libguile/debug-malloc.c, libguile/deprecation.c, libguile/error.c,
libguile/eval.c, libguile/expand.c, libguile/extensions.c,
libguile/filesys.c, libguile/init.c, libguile/load.c,
libguile/modules.c, libguile/pairs.c, libguile/posix.c,
libguile/print.c, libguile/random.c, libguile/read.c,
libguile/regex-posix.c, libguile/snarf.h, libguile/srfi-13.c,
libguile/stacks.c, libguile/stime.c, libguile/strports.c,
libguile/values.c: Use 'scm_from_utf8_*' where appropriate.
As the FSF advises, 'There is no legal significance to using the
three-character sequence “(C)”, but it does no harm.' It does take up
space though! For that reason, we remove it here from our C files.
* libguile/_scm.h: Remove definitions of min and max macros.
* libguile/array-map.c (MAX):
* libguile/foreign.c (MAX):
* libguile/numbers.c (MIN):
* libguile/quicksort.i.c (MIN):
* libguile/socket.c (MAX):
* libguile/strports.c (MAX): Inline definitions into callers. We're
going to remove _scm.h, which will pay off this duplication.
* libguile/bytevectors.h: Include uniform.h, for use in the macros.
* libguile/extensions.h: Include libpath.h, for the
SCM_EFFECTIVE_VERSION, which is almost always used with these
routines.
* libguile/frames.h:
* libguile/instructions.h:
* libguile/intrinsics.h:
* libguile/loader.h:
* libguile/programs.h:
* libguile/vm.h: Include <libguile/__scm.h> instead of <libguile.h>.
Cuts a circular include, but also precipitates a lot of maintenance in
the .c files.
* libguile/*.c: Update C files to add needed all needed includes that
before were getting automatically pulled in by the indirect inclusion
of libguile.h.
* libguile/root.h:
* libguile/root.c: Remove these files.
* libguile/deprecated.h:
* libguile/deprecated.c (scm_internal_cwdr, scm_call_with_dynamic_root)
(scm_dynamic_root, scm_apply_with_dynamic_root): Deprecate.
Remove all root.h usage, which was vestigial.
* module/ice-9/serialize.scm: Use (current-thread) instead
of (dynamic-root).
This removes a limitation on the number of port types, simplifies the
API, and removes a central point of coordination.
* libguile/ports-internal.h (struct scm_t_port_type): Rename from
scm_t_ptob_descriptor, now that it's private. Add GOOPS class
fields.
(struct scm_t_port): Rename from struct scm_port, especially
considering that deprecated.h redefines scm_port using the
preprocessor :(.
* libguile/ports.h: Add definitions of SCM_PORT and SCM_PORT_TYPE,
though the scm_t_port and scm_t_port_type types are incomplete.
(SCM_TC2PTOBNUM, SCM_PTOBNUM, SCM_PTOBNAME): Remove, as there are no
more typecodes for port types.
(scm_c_num_port_types, scm_c_port_type_ref, scm_c_port_type_add_x):
Remove.
(scm_make_port_type): Return a scm_t_port_type*. All methods adapted
to take a scm_t_port_type* instead of a ptobnum.
(scm_c_make_port_with_encoding, scm_c_make_port): Take a port type
pointer instead of a tag.
(scm_new_port_table_entry): Remove; not useful.
* libguile/ports.c: Remove things related to the port kind table. Adapt
uses of SCM_PORT_DESCRIPTOR / scm_t_ptob_descriptor to use
SCM_PORT_TYPE and scm_t_port_type.
* libguile/deprecated.c:
* libguile/deprecated.h:
* libguile/filesys.c:
* libguile/fports.c:
* libguile/fports.h:
* libguile/print.c:
* libguile/r6rs-ports.c:
* libguile/strports.c:
* libguile/strports.h:
* libguile/tags.h:
* libguile/vports.c:
* test-suite/standalone/test-scm-c-read.c: Adapt to change.
* libguile/goops.c (scm_class_of, make_port_classes)
(scm_make_port_classes, create_port_classes): Adapt to store the
classes in the ptob.
* libguile/ports.h (scm_t_port): Represent the conversion strategy as a
symbol, to make things easier for Scheme. Rename to
"conversion_strategy".
(scm_c_make_port_with_encoding): Change to take encoding and
conversion_strategy arguments as symbols.
(scm_i_string_failed_conversion_handler): New internal helper, to turn
a symbol to a scm_t_string_failed_conversion_handler.
(scm_i_default_port_encoding): Return the default port encoding as a
symbol.
(scm_i_default_port_conversion_strategy)
(scm_i_set_default_port_conversion_strategy): Rename from
scm_i_default_port_conversion_handler et al. Take and return Scheme
symbols.
* libguile/foreign.c (scm_string_to_pointer, scm_pointer_to_string): Use
scm_i_default_string_failed_conversion_handler instead of
scm_i_default_port_conversion_handler.
* libguile/print.c (PORT_CONVERSION_HANDLER): Update definition.
(print_normal_symbol): Use PORT_CONVERSION_HANDLER.
* libguile/r6rs-ports.c (make_bytevector_input_port):
(make_custom_binary_input_port, make_bytevector_output_port): Adapt to
changes in scm_c_make_port_with_encoding.
* libguile/strings.h:
* libguile/strings.c (scm_i_default_string_failed_conversion_handler):
New helper.
(scm_from_locale_stringn, scm_from_port_stringn):
(scm_to_locale_stringn, scm_to_port_stringn): Adapt to interface
changes.
* libguile/strports.c (scm_mkstrport): Adapt to
scm_c_make_port_with_encoding change.
* libguile/ports.c (scm_c_make_port): Adapt to
scm_c_make_port_with_encoding change.
(ascii_toupper, encoding_matches, canonicalize_encoding): Move down in
the file.
(peek_codepoint, get_codepoint, scm_ungetc): Adapt to port conversion
strategy change. Remove duplicate case in get_codepoint.
(scm_init_ports): Move symbol initializations to the same place.
This will allow better Scheme integration for ports.
* libguile/ports.h (scm_t_port_buffer): Change "holder" member to be a
bytevector defined to have "buf" as its starting point.
(scm_t_ptob_descriptor): Change read and write functions to take
bytevectors as arguments and to return the number of octets read or
written.
(scm_make_port_type): Adapt accordingly.
(scm_c_read_bytes, scm_c_write_bytes): New functions that take
bytevectors.
* libguile/ports.c (scm_make_port_type): Adapt to read/write function
prototype change.
(scm_c_make_port_buffer): Arrange to populate the "bytevector" field.
(scm_i_read_bytes_unlocked): New function.
(scm_i_read_unlocked): Use scm_i_read_bytes_unlocked.
(scm_c_read_bytes_unlocked): New function.
(scm_c_read_unlocked): Update comment, and always go through the
buffer.
(scm_c_read_bytes): New function.
(scm_flush_unlocked): Use scm_i_write_unlocked instead of the port's
write function.
(scm_i_write_bytes_unlocked): New function.
(scm_i_write_unlocked): Use scm_i_write_bytes_unlocked.
(scm_c_write_bytes_unlocked): New function.
(scm_c_write_unlocked): Always write through the buffer.
(scm_c_write_bytes): New function.
(scm_truncate_file): Remove unused variable.
(void_port_read, void_port_write): Adapt to read/write prototype
change.
* libguile/fports.c (fport_read, fport_write):
* libguile/r6rs-ports.c (bytevector_input_port_read)
(custom_binary_input_port_read, bytevector_output_port_write)
(custom_binary_output_port_write, transcoded_port_write)
(transcoded_port_read): Adapt to read/write prototype
change.
(scm_get_bytevector_n, scm_get_bytevector_n_x)
(scm_get_bytevector_all): Use scm_c_read_bytes.
(scm_put_bytevector): Use scm_c_write_bytes.
* libguile/strports.c (string_port_read, string_port_write):
* libguile/vports.c (soft_port_write, soft_port_read): Adapt to
read/write prototype change.
* test-suite/standalone/test-scm-c-read.c (custom_port_read): Fix for
read API change.
* libguile/ports.h (struct scm_t_port_buffer): New data type.
(struct scm_t_port): Refactor to use port buffers instead of
implementation-managed read and write pointers. Add "read_buffering"
member.
(SCM_INITIAL_PUTBACK_BUF_SIZE, SCM_READ_BUFFER_EMPTY_P): Remove.
(scm_t_ptob_descriptor): Rename "fill_input" function to "read", and
take a port buffer, returning void. Likewise "write" takes a port
buffer and returns void. Remove "end_input"; instead if there is
buffered input and rw_random is true, then there must be a seek
function, so just seek back if needed. Remove "flush"; instead all
calls to the "write" function implicitly include a "flush", since the
buffering happens in the generic port code now. Remove "setvbuf", but
add "get_natural_buffer_sizes"; instead the generic port code can
buffer any port.
(scm_make_port_type): Adapt to read and write prototype changes.
(scm_set_port_flush, scm_set_port_end_input, scm_set_port_setvbuf):
Remove.
(scm_slow_get_byte_or_eof_unlocked)
(scm_slow_get_peek_or_eof_unlocked): Remove; the slow path is to call
scm_fill_input.
(scm_set_port_get_natural_buffer_sizes): New function.
(scm_c_make_port_buffer): New internal function.
(scm_port_non_buffer): Remove. This was a function for
implementations that is no longer needed. Instead open with BUF0 or
use (setvbuf port 'none).
(scm_fill_input, scm_fill_input_unlocked): Return the filled port
buffer.
(scm_get_byte_or_eof_unlocked, scm_peek_byte_or_eof_unlocked): Adapt
to changes in buffering and EOF management.
* libguile/ports.c: Adapt to port interface changes.
(initialize_port_buffers): New function, using the port mode flags to
set up appropriate initial buffering for all ports.
(scm_c_make_port_with_encoding): Create port buffers here instead of
delegating to implementations.
(scm_close_port): Flush the port if needed instead of delegating to
the implementation.
* libguile/filesys.c (set_element): Adapt to buffering changes.
* libguile/fports.c (fport_get_natural_buffer_sizes): New function,
replacing scm_fport_buffer_add.
(fport_write, fport_read): Update to let the generic ports code do the
buffering.
(fport_flush, fport_end_input): Remove.
(fport_close): Don't flush in a dynwind; that's the core ports' job.
(scm_make_fptob): Adapt.
* libguile/ioext.c (scm_redirect_port): Adapt to buffering changes.
* libguile/poll.c (scm_primitive_poll): Adapt to buffering changes.
* libguile/ports-internal.h (struct scm_port_internal): Remove
pending_eof flag; this is now set on the read buffer.
* libguile/r6rs-ports.c (struct bytevector_input_port): New type. The
new buffering arrangement means that there's now an intermediate
buffer between the bytevector and the user of the port; this could
lead to a perf degradation, but on the other hand there are some other
speedups enabled by the buffering refactor, so probably the memcpy
cost is dwarfed by the cost of the other parts of the ports
machinery.
(make_bytevector_input_port, bytevector_input_port_read):
(bytevector_input_port_seek, initialize_bytevector_input_ports): Adapt
to new buffering arrangement.
(struct custom_binary_port): Remove read buffer, as Guile handles that
now.
(custom_binary_input_port_setvbuf): Remove; now handled by Guile.
(make_custom_binary_input_port, custom_binary_input_port_read)
(initialize_custom_binary_input_ports): Adapt.
(scm_get_bytevector_some): Adapt to new EOF management.
(scm_t_bytevector_output_port_buffer): Hold on to the underlying port,
so we can flush it if it's open.
(make_bytevector_output_port, bytevector_output_port_write):
(bytevector_output_port_seek): Adapt.
(bytevector_output_port_procedure): Flush the port as appropriate, so
that we get all the bytes.
(make_custom_binary_output_port, custom_binary_output_port_write):
Adapt.
(make_transcoded_port): Don't muck with buffering.
(transcoded_port_write): Simply forward the write to the underlying
port.
(transcoded_port_read): Likewise.
(transcoded_port_close): No need to flush.
(initialize_transcoded_ports): Adapt.
* libguile/read.c (scm_i_scan_for_encoding): Adapt to buffering
changes.
* libguile/rw.c (scm_write_string_partial): Adapt to buffering changes.
* libguile/strports.c: Adapt to the fact that we don't manage the
buffer. Probably room for speed improvements here...
* libguile/vports.c (soft_port_get_natural_buffer_sizes): New function.
Adapt the rest of the file for the new buffering regime.
* test-suite/tests/r6rs-ports.test ("8.2.10 Output ports"): Custom
binary output ports need to be flushed before you can rely on the
write! procedure having been called. Add necessary flush-port
invocations.
("8.2.6 Input and output ports"): Transcoded ports now have an
internal buffer by default. This test checks that the characters are
transcoded one at a time, so to do that, call setvbuf on the
transcoded port to remove the buffer.
* test-suite/tests/web-client.test (run-with-http-transcript): Fix for
different flushing regime on soft ports. (The vestigial flush
procedure is now called after each write, which is not what the test
was expecting.)
* test-suite/standalone/test-scm-c-read.c: Update for changes to the C
interface for defining port types.
* doc/ref/api-io.texi (Ports): Update to discuss buffering in a generic
way, and to remove a hand-wavey paragraph describing string ports as
"interesting and powerful".
(Reading, Writing): Remove placeholder comments. Document
`scm_lfwrite'.
(Buffering): New section.
(File Ports): Link to buffering.
(I/O Extensions): Join subnodes into parent and describe new API,
including buffering API.
* doc/ref/posix.texi (Ports and File Descriptors): Link to buffering.
Remove unread-char etc, as they are documented elsewhere.
(Pipes, Network Sockets and Communication): Link to buffering.
* libguile/ports.c (scm_seek): Flush before seeking on a buffered port.
* libguile/fports.c (fport_seek):
* libguile/strports.c (st_seek): Remove code to flush buffers.
* test-suite/tests/ports.test: Update test expectations that the
putback buffer is flushed on a seek. Previously there was a special
case for SEEK_CUR with an offset of 0 to avoid flushing buffers, but
that's an arbitrary choice that differs from all other combinations of
OFFSET and WHENCE.
* libguile/fports.c (fport_flush, fport_end_input): Move rw_active
handling to ports.c.
* libguile/ioext.c (scm_redirect_port): Use scm_flush_unlocked instead
of calling the flush function directly.
* libguile/ports.c (scm_c_make_port_with_encoding): Ports default to
"rw_random" mode when they have a seek function.
(scm_c_read_unlocked, scm_i_unget_bytes_unlocked)
(scm_slow_get_byte_or_eof_unlocked)
(scm_slow_peek_byte_or_eof_unlocked): Flush write buffer and set
rw_active always in the same way, and only if rw_random is true.
(scm_end_input_unlocked, scm_flush_unlocked): Clear rw_active here
unconditionally.
(scm_c_write_unlocked): Flush read buffer and set rw_active always in
the same way, but only if rw_random is true.
(scm_c_write, scm_lfwrite): Whitespace fixes.
(scm_lfwrite_substr): Don't flush read buffer; lower-level code will
do this.
(scm_truncate_file): Use scm_flush_unlocked instead of calling the
flush function directly.
* libguile/r6rs-ports.c (transcoded_port_flush): Don't muck with
rw_active.
* libguile/read.c (scm_i_scan_for_encoding): Flush write buffer if
needed in same way as ports.c.
* libguile/strports.c (st_end_input): Don't muck with rw_active.
(scm_mkstrport): rw_random defaults to 1 now.
* libguile/strports.c (scm_mkstrport): Use UTF-8; ignore
%default-port-encoding. Rename 'str_len' and 'c_pos' to
'num_bytes' and 'c_byte_pos'. Interpret 'pos' argument
as a character index instead of a byte index.
* module/ice-9/boot-9.scm (%cond-expand-features): Add srfi-6 to the
list of core features.
* module/srfi/srfi-6.scm (open-input-string, open-output-string): Simply
re-export these, since the core versions are now compliant.
* doc/ref/api-io.texi (String Ports): Remove text that describes
non-compliant behavior of string ports with regard to encoding.
* doc/ref/srfi-modules.texi (SRFI-0): Add srfi-6 to the list of
core features.
(SRFI-6): Remove text that mentions non-compliant behavior of
core string ports.
* module/ice-9/format.scm (format):
* module/ice-9/pretty-print.scm (truncated-print):
* module/rnrs/io/ports.scm (open-string-input-port,
open-string-output-port):
* test-suite/test-suite/lib.scm (format-test-name):
* test-suite/tests/chars.test ("combining accent is pretty-printed",
"combining X is pretty-printed"):
* test-suite/tests/ecmascript.test (eread, eread/1):
* test-suite/tests/rdelim.test:
* test-suite/tests/reader.test (read-string):
* test-suite/tests/regexp.test:
* test-suite/tests/srfi-105.test (read-string): Don't set
%default-port-encoding before creating string ports.
* benchmark-suite/benchmarks/ports.bm (%latin1-port): Use
'set-port-encoding!' to set the string port encoding.
(%utf8/ascii-port, %utf8/wide-port, "rdelim"): Don't set
%default-port-encoding before creating string ports.
* test-suite/tests/r6rs-ports.test ("lookahead-u8 non-ASCII"): Don't set
%default-port-encoding before creating string ports.
("put-bytevector with UTF-16 string port", "put-bytevector with
wrong-encoding string port"): Use 'set-port-encoding!' to set the
string port encoding.
* test-suite/tests/print.test (tprint): Use 'set-port-encoding!' to set
the string port encoding.
("truncated-print"): Use 'pass-if-equal'.
* test-suite/tests/ports.test ("encoding failure leads to exception",
"%default-port-encoding is honored", "peek-char [latin-1]", "peek-char
[utf-8]", "peek-char [utf-16]"): Remove tests.
("%default-port-encoding is ignored", "peek-char"): Add tests.
("suitable encoding [latin-1]", "suitable encoding [latin-3]",
"wrong encoding, error", "wrong encoding, substitute",
"wrong encoding, escape"): Use 'set-port-encoding!' to set the
string port encoding.
("%default-port-encoding, wrong encoding"): Rewrite to use
a file port instead of a string port.
* libguile/debug.c (scm_local_eval):
libguile/ports.c (scm_current_warning_port):
libguile/strports.c (scm_eval_string_in_module): Perform
lazy-initialization while holding a mutex. Use SCM_UNDEFINED as the
uninitialized value. Use 'scm_c_*_variable'.
* doc/ref/api-modules.texi (Accessing Modules from C): Fix
'my_eval_string' example to be thread-safe.
Partly addresses <http://bugs.gnu.org/11197>.
* libguile/strports.c (scm_mkstrport): Call `scm_port_non_buffer', set
Z's cell type and stream, and release `scm_i_port_table_mutex' early.
Reacquire `scm_i_port_table_mutex' once BUF, C_BUF, and STR_LEN are
initialized.
* test-suite/tests/ports.test ("string ports")["encoding failure leads
to exception"]: New test.
* libguile/strports.c (scm_mkstrport): Remove initialization of
`pt->ilseq_handler'.
* module/ice-9/pretty-print.scm (truncated-print)[ellipsis]: Set
%DEFAULT-PORT-CONVERSION-STRATEGY to 'error.
* test-suite/tests/ports.test ("string
ports")["%default-port-conversion-strategy is honored"]: New test.
["wrong encoding"]: Rename to...
["wrong encoding, error"]: ... this. Explicitly set
%DEFAULT-PORT-CONVERSION-STRATEGY to 'error. Return #f when no
exception is raised.
* libguile/print.c (PORT_CONVERSION_HANDLER): New macro.
(print_extended_symbol, iprin1, write_character, scm_write_char): Use
it instead of `scm_i_get_conversion_strategy'.
* libguile/strports.c (scm_mkstrport): Assign `pt->ilseq_handler'
directly instead of via `scm_i_set_conversion_strategy_x'.
* libguile/strports.c (st_fill_input): Rename from stfill_buffer, and
remove an unneeded scm_return_first_int.
(st_resize_port): Minor variable renaming.
(st_write): Keep read_pos updated to be the same as write_pos. If we
need to resize, do so only once.
(st_seek): No more need to flush.
(st_truncate): Update read_pos here too.
(scm_mkstrport): No need to flush here.
(scm_strport_to_string): Just call scm_from_stringn; rely on it to
detect the latin1 case.
(scm_make_stptob): No more flush function.
* libguile/ports.c (scm_c_make_port_with_encoding, scm_c_make_port): New
functions, to replace scm_new_port_table_entry. Use a weak set
instead of a weak table.
(scm_i_remove_port):
(scm_c_port_for_each, scm_port_for_each): Adapt to use weak set.
(scm_i_void_port): Use scm_c_make_port.
(scm_init_ports): Make a weak set.
* libguile/fports.c:
* libguile/ioext.c:
* libguile/r6rs-ports.c:
* libguile/strports.c:
* libguile/vports.c: Adapt to use the new scm_c_make_port API.
