SCM_SLOPPY_CONSP and SCM_SLOPPY_NCONSP. (SCM_CONSP) Define this
in terms of SCM_SLOPPY_NCONSP instead of repeating the
expression.
* symbols.h (SCM_SLOPPY_SUBSTRP, SCM_SUBSTRP): Added former, and
define latter in terms of sloppy variant.
* strings.h (SCM_SLOPPY_STRINGP, SCM_STRINGP): Added former, and
define latter in terms of sloppy variant.
* scm_validate.h (SCM_MAKE_VALIDATE): Added this macro to factor
out the commonality of the various basic SCM_VALIDATE_foop
macros. Use SCM_MAKE_VALIDATE macro where possible. Fix
SCM_VALIDATE_INT_COPY to not use scm_num2ulong -- that does
coercion to an integer which is more advanced than desired and
SCM_NUM2ULONG provides that functionality. Use SCM_ASSERT_RANGE
appropriately for the various _MIN, _MAX, _RANGE macros. Drop
some superfluous "SCM_NIMP &&" where possible. Eliminate obsoleted
SCM_VALIDATE_NIMCONS (SCM_VALIDATE_CONS now does the NIMP test as
part of its SCM_CONSP test).
* socket.c, ports.c, pairs.c, list.c, lang.c, async.c: Use
SCM_VALIDATE_CONS, not obsoleted SCM_VALIDATE_NIMCONS.
* scm_validate.h: Added SCM_VALIDATE_THREAD.
* *.c: Remove SCM_NIMP(X) when it is an extraneous pre-test given
that SCM_FOOP macros all now include SCM_NIMP in their expansion.
This simplifies lots of code, making it far more readable.
GUILE_PROC1. Build guile-procedures.txt, and add that file to
pkgdata_DATA.
* load.c: Added `pkgdata-dir', `site-dir', `library-dir'
primitives.
* guile-doc-snarf.awk: Drop trailing space when no arguments:
e.g., "(foo )" is now "(foo)".
* *.c: moved all the documentation for primitives from
guile-doc/ref/{appendices,posix,scheme}.texi into the source code.
This leaves about half of the primitives undocumented. Also, all
the markup is currently still texinfo. I don't have a problem
with texinfo per se, but the markup is not very descriptive or
accurate.
function headers and argument checking. Switched SCM_PROC,
SCM_PROC1 macros to be GUILE_PROC, GUILE_PROC1 (may change names
later, but was useful to keep old versions around while migrate)
that has docstrings and argument lists embedded in the GUILE_PROC
macro invocations that expand into a function header. Use lots of
new SCM_VALIDATE_* macros to simplify error checking and reduce
tons of redundancy. This is very similar to what I did for Scwm.
Note that none of the extraction of the docstrings, nor software
engineering checks of Scwm is yet added to Guile. I'll work on
that tomorrow, I expect.
* Makefile.am: Added scm_validate.h to modinclude_HEADERS.
* chars.c: Added docstrings for the primitives defined in here.
* snarf.h: Added GUILE_PROC, GUILE_PROC1. Added
SCM_REGISTER_PROC to be like old SCM_PROC, though old SCM_PROC
still remains for now. Changed naming convention for the s_foo
string name of the primitive to be s_scm_foo for ease of use with
the macro.
* scm_validate.h: Lots of new SCM_VALIDATE macros to simplify
argument checking through guile. Maybe some of these should be
folded into the header file for the types they check, but for now
it was easiest to just stick them all in one place.
* socket.c (scm_htons, scm_ntohs, scm_htonl, scm_ntohl): new
functions for network data conversion.
* numbers.c (scm_num2long, scm_num2longlong):
throw out-of-range instead of wrong-type-arg if appropriate.
(scm_iint2str): handle -2^31 correctly.
(scm_num2long): handle -2^31 bignum correctly.
(scm_num2long_long): rewrite the bigdig case: basically copied
from scm_num2long.
numbers.h: (SCM_BITSPERLONGLONG): deleted.
* unif.c (rapr1): use sprintf instead of intprint for unsigned
longs: intprint can't cope with large values.
* numbers.c (scm_num2ulong): check more consistently that the
input is not negative. if it is, throw out-of-range instead of
wrong-type-arg.
* ramap.c (scm_array_fill_int): don't limit fill to INUM for
uvect, ivect or llvect.
Check that fill doesn't overflow short uniform array.
* __scm.h: add another long to the definition of long_long and
ulong_long.
* unif.c (scm_raprin1): use 'l' instead of "long_long" in the
print representation of llvect. read can't handle more than
one character.
(scm_dimensions_to_uniform_array): make "fill" an optional argument
instead of a rest argument.
* tags.h (scm_tc7_llvect): wasn't defined anywhere, so use the free
tag 29 for now.
* __scm.h: don't mention LONGLONGS.
* unif.c, numbers.c, eq.c, gc.c, print.c, eval.c, ramap.c:
replace LONGLONGS with HAVE_LONG_LONGS as set by configure.
* net_db.c (scm_inet_aton): throw errors using the misc-error key
instead of system-error. inet_aton doesn't set errno.
system-error isn't right in gethost either, since it's throwing
the value of h_errno instead of errno. so:
(scm_host_not_found_key, scm_try_again_key,
scm_no_recovery_key, scm_no_data_key): new error keys.
(scm_resolv_error): new procedure, use the new keys.
(scm_gethost): call scm_resolv_error not scm_syserror_msg.
* error.c: (various): use scm_cons instead of scm_listify
to build short lists.
* boot-9.scm (read-hash-extend to set up arrays): add 'l' for
long_long uniform vectors.
* networking.scm (sethostent, setnetent, setprotoent, setservent):
take an optional argument STAYOPEN. default is #f.
* readline.c (scm_init_readline): set rl_readline_name to Guile,
to allow conditionals in .inputrc.
newline. A bit faster, and definitely hairier.
(scm_read_line): Count newlines here instead.
* strings.c (scm_take_str): New function.
(scm_take0str): Reimplement in terms of scm_take_str. * strings.h
(scm_take_str): New declaration. * ioext.c (scm_read_line): Use
scm_take_str, to avoid copying the string.
Add some simple-minded support for line buffered ports.
* ports.h (SCM_BUFLINE): New flag for ports.
* init.c (scm_init_standard_ports): Request line-buffering on
the standard output port.
* * ports.c (scm_mode_bits): Recognize 'l' as a request for line
buffering.
(scm_putc, scm_puts, scm_lfwrite): If the port is line-buffered,
and there's a newline to be written, flush the port.
* ports.c: (scm_lseek): clear buffers even if just reading current
position.
* fports.c (local_fclose): call local_fflush unconditionally.
(various): don't use the scm_must... memory procs.
* ports.h (scm_port): make read_pos a pointer to const.
strports.c: take care of rw_active and rw_randow.
fports.c: scm_fport_drain_input: removed. do it all in ports.c.
strports.c (scm_mkstrport): check that pos is reasonable.
ioext.c (scm_ftell, scm_fseek): use lseek.
(SCM_CLEAR_BUFFERS): macro deleted.
ioext.c (redirect_port: use ptob fflush, read_flush.
ports.h (scm_ptobfuns): add ftruncate.
ports.c (scm_newptob): set ftruncate.
adjust ptob tables.
* ports.c (scm_ftruncate): new procedure.
fports.c (local_ftrunate), strports.c (str_ftruncate): new procs.
strports.c (st_seek, st_grow_port): new procs.
fports.h (scm_port): change size types from int to off_t.
ports.c (scm_init_ports): initialise the seek symbols here
instead of in ioext.c.
strports.c (scm_call_with_output_string): start with an empty
string, so seek and ftruncate can be used.
* ports.h (scm_ptobfuns): add a read_flush procedure which is the
equivalent to fflush for the read buffer.
* ports.c (scm_newptob): set read_flush.
ports.c (void_port_ptob): set read_flush.
fports.c (local_read_flush): new proc. add to ptob.
strport.c (st_read_flush): likewise.
vport.c (sf_read_flush): likewise.
fports.h (struct scm_fport): remove random member. there's nothing
left but fdes. leaving it as a struct to allow for future changes.
fports.c: replace usage of scm_fport::random with scm_port::rw_random.
ports.c: (scm_putc, scm_puts, scm_lfwrite): call the read_flush
ptob proc if the read buffer is filled.
* ports.h (scm_port): add a rw_random member and replace
reading and writing members with rw_active member.
SCM_PORT_READ/SCM_PORT_WRITE: new values.
* ports.h (struct scm_port_table): add writing and reading members
to replace write_needs_seek: it isn't good enough for non-fports.
ports.c, ioext.c, fports.c: corresponding changes.
(struct scm_port_table): give it a typedef and rename to scm_port.
ports.c, fports.c, strports.c, vports.c, ioext.c, ports.h:
corresponding changes.
* ports.c (scm_newptob): bugfix: set seek member.
* * (scm_lseek): new procedure, using code from ioext.c:scm_fseek
and generalised to all port types.
* scmsigs.c (scm_init_scmsigs): set the SA_RESTART flag for all
signals (it was only being done for handlers installed from Scheme).
Otherwise (for example) SIGSTOP followed by SIGCONT on an interpreter
waiting for input caused an EINTR error from read.
* ports.h (struct scm_port_table): make all the char members
unsigned, so they convert to int without becoming negative if large.
* fports.c (scm_fdes_wait_for_input): forgot to check compilation
with threads enabled. rename this procedure to
fport_wait_for_input and take a port instead of a fdes.
use scm_fport_input_waiting_p instead of scm_fdes_waiting_p.
* readline.c (scm_readline): Applied a patch from Greg Harvey to
get readline support working again: use fdopen to get FILE objects.
* gc.c (scm_init_storage): install an atexit proc to flush the
ports.
(cleanup): the new proc. it sets a global variable which can be
checked by the ptob flush procs to avoid trying to throw
exceptions during exit. not very pleasant but it seems more reliable.
* fports.c (local_fflush): check terminating variable and if set
don't throw exception.
* CHECKME: that the atexit proc is installed if unexec used.
* throw.c (scm_handle_by_message): don't flush all ports here.
it still causes bus errors.
* fports.h (SCM_FPORT_CLEAR_BUFFERS): rename to SCM_CLEAR_BUFFERS
and move to ioext.c.
* fports.c (scm_fdes_waiting_p): merged into fport_input_waiting_p.
* ports.c (scm_char_ready_p): check the port buffer and call the
ptob entry if needed.
* ports.h (scm_ptobfuns): input_waiting_p added. change all the
ptob initialisers. use it in char-ready
* ioext.c (scm_do_read_line): moved from ports.c. make it static.
* vports.c (sfflush): modified to write a char (since softports
currently use shortbuf.)
* fports.c (scm_standard_stream_to_port): moved to init.c and
made static.
* init.c (scm_init_standard_ports): make stdout and stderr
unbuffered if connected to a terminal. with stdio they
were line-buffered by default.
* ports.h (scm_ptobfuns): change fflush return to void.
change flush proc definitions.
* strports.c (scm_call_with_output_string): get size from
buffer instead of port stream.
(scm_strprint_obj): likewise.
(st_flush): new proc.
* ports.h (struct scm_port_table): added write_end member,
as an optimisation. set it where write_buf_size is set.
* ports.h (struct scm_port_table): change stream from void *
back to SCM. SCM presumably must be large enough to hold a
pointer (and probably vice versa but who knows.)
(SCM_SSTREAM): deleted. change users back to SCM_STREAM.
(scm_puts): rewritten
* fports.c (local_ffwrite, local_fputs): removed.
* strports.c (stputc, stputs, stwrite): dyked out (FIXME)
* vports.c (sfputc, sfputs, sfwrite) likewise.
* ports.c (write_void_port, puts_void_port): removed.
(putc_void_port, getc_void_port, fgets_void_port): likewise.
* ports.c (scm_lfwrite): rewritten using fport.c version.
* fports.c (local_fputc): deleted.
* ports.c (scm_add_to_port_table): initialise write_needs_seek.
* ports.h (scm_ptobfuns): add seek function pointer.
* fports.c: set it to local_seek, new procedure.
* fports.h (SCM_MAYBE_DRAIN_INPUT): moved to ports.c.
use ptob for seek. take ptob instead of fport arg.
* ports.h (struct scm_port_table): new member write_needs_seek,
replaces reading member in fport struct.
* vports.c (sfgetc): store the getted char into the buffer.
rename to sf_fill_buffer and install it for fill-buffer in ptob.
the Scheme interface is still a procedure that gets a char.
(scm_make_soft_port): set up the port buffer (shortbuf).
* fports.c (local_fgetc, local_fgets): deleted.
* strports.c (stgetc): likewise.
* ports.c: scm_generic_fgets: likewise.
* ports.h (scm_ptobfuns): add fill_buffer.
* ports.c (scm_newptob): assign it.
* strports.c (scm_mkstrport): set up the buffer.
put just the string into the stream, not cons (pos stream).
(stfill_buffer): new proc.
* ports.h: fport buffer moved into port table: to be
used for all port types.
* throw.c (scm_handle_by_message): flush ports at exit.
* socket.c (scm_sock_fd_to_port): use scm_fdes_to_port.
(scm_getsockopt, scm_setsockopt, scm_shutdown, scm_connect,
scm_bind, scm_listen, scm_accept, scm_getsockname,
scm_getpeername, scm_recv, scm_send, scm_recvfrom,
scm_sendto,
use SCM_FPORT_FDES. use SCM_OPFPORTP not SCM_FPORTP.
* posix.c (scm_getgroups): use SCM_ALLOW/DEFER_INTS.
(scm_ttyname): use SCM_FPORT_FDES.
(scm_tcgetpgrp, scm_tcsetpgrp): likewise.
* ioext.c (scm_isatty_p): use SCM_FPORT_FDES.
(scm_fdes_to_ports): modified.
(scm_fdopen): use scm_fdes_to_port.
* ports.c (scm_init_ports): don't try to flush ports using
atexit(). it's too late, errors will cause SEGV.
* fports.c (scm_fport_buffer_add): new procedure.
* fports.h (SCM_FDES_RANDOM_P): new macro. use it in
scm_fdes_to_port and scm_redirect_port.
* ioext.c (scm_redirect_port): use setvbuf to set buffers in the
new port. reset fp->random.
* fports.c (scm_fdes_to_port), ports.c (scm_void_port),
filesys.c (scm_opendir):
restore defer interrupts while the port is constructed.
* (scm_setvbuf): if mode is _IOFBF and size is not supplied,
derive buffer size from fdes or use a default.
(scm_fdes_to_port): use setvbuf instead of creating the buffers
directly.
vports.c (various places): use SCM_SSTREAM.
strports.c: likewise.
* gdbint.c: likewise.
* ports.h (SCM_SSTREAM): new macro.
* fports.c (scm_input_waiting_p): use scm_return_first, since port
may be removed from the stack by the tail call to scm_fdes_waiting_p.
* fports.h (SCM_CLEAR_BUFFERS): new macro.
* ports.c (scm_force_output): call scm_fflush.
* print.c (scm_newline): don't check errno for EPIPE (it wouldn't
* reach this point.) don't flush port (if scm_cur_outp).
* fports.h (SCM_FPORT_FDES): new macro.
* vports.c (sfflush): don't need to set errno.
* ports.c: install scm_flush_all_ports to be run on exit.
ports.c fports.c ioext.c posix.c socket.c net_db.c filesys.c:
removed all uses of SCM_DEFER/ALLOW ints for now. they were mainly
just protecting errno. some may need to be put back.
* scmsigs.c (take_signal): save and restore errno while this
proc runs.
*fports.c (print_pipe_port, local_pclose, scm_pipob): deleted.
* open-pipe, close-pipe are emulated in (ice-9 popen)
ports.c (scm_ports_prehistory): don't init scm_pipob.
ports.h (scm_tc16_pipe): deleted.
posix.c (scm_open_pipe, scm_close_pipe): deleted.
* ioext.c (scm_primitive_move_to_fdes): use fport.
* fport.c (scm_fport_fill_buffer): flush write buffer if needed.
change arg type from scm_fport to SCM port.
fport.h (SCM_SETFDES): removed.
(SCM_MAYBE_DRAIN_INPUT): new macro.
* ioext.c (scm_dup_to_fdes): use SCM_FSTREAM.
(scm_ftell): always use lseek and account for the buffer.
(scm_fileno): use fport buffer.
(scm_fseek): clear fport buffers. always use lseek.
* posix.c (scm_pipe): use fport buffer.
* unif.c: include fports.h instead of genio.h.
* fports.c (scm_fdes_wait_for_input, scm_fport_fill_buffer): new
procedures.
(local_fgetc): use them.
(local_ffwrite): use buffer.
(local_fgets): use buffer.
(scm_setbuf0): deleted.
(scm_setvbuf): set the buffer.
(scm_setfileno): deleted.
(scm_evict_ports): set fdes directly.
* (scm_freopen): deleted. doesn't seem useful in Guile.
(scm_stdio_to_port): deleted.
fports.h (struct scm_fport): add shortbuf member to avoid separate
code for unbuffered ports.
(SCM_FPORTP, SCM_OPFPORTP, SCM_OPINFPORTP, SCM_OPOUTFPORTP): moved
from ports.h.
* genio.c, genio.h: move contents into ports.c, ports.h. The
division wasn't useful.
* fports.c, fports.h (scm_fport_drain_input): new procedure.
* ports.c (scm_drain_input): call scm_fport_drain_input.
* scm_fdes_waiting_p: new procedure.
* fports.c (scm_fdes_to_port): allocate read and/or write buffers.
(scm_input_waiting_p): check the buffer.
(local_fgetc, local_fflush, local_fputc): likewise.
* fports.h (scm_fport): read/write_buf,_pos,_buf_end,,_buf_size:
new members.
* init.c (scm_init_standard_ports): pass fdes instead of FILE *.
* * ports.c (scm_drain_input): new procedure.
ports.h: prototype.
* fports.c (FPORT_READ_SAFE, FPORT_WRITE_SAFE, FPORT_ALL_OKAY,
pre_read, pre_write): removed.
(local_fputc, local_fputs, local_ffwrite): use write, not stdio.
(scm_standard_stream_to_port): change first arg from FILE * to
int fdes.
(local_fflush): flush fdes, not FILE *.
* fports.h (SCM_NOFTELL): removed.
* genio.c, ports.c: don't include filesys.h.
* genio.c (scm_getc): don't use scm_internal_select if FPORT.
do it in fports.c:local_fgetc.
* genio.c: don't use SCM_SYSCALL when calling ptob procedures.
do it where it's needed in the port smobs.
* filesys.c (scm_input_waiting_p): moved to fports.c, stdio
buffer support removed. take SCM arg, not FILE *.
* filesys.h: prototype moved too.
* fports.c (scm_fdes_to_port): new procedure.
(local_fgetc): use read not fgetc.
(local_fclose): use close, not fclose.
(local_fgets): use read, not fgets
* fports.h: prototype for scm_fdes_to_port.
* fports.h (scm_fport): new struct.
* fports.c (scm_open_file): use open, not fopen.
#include fcntl.h
* ports.h (struct scm_port_table): change stream from SCM to void *.
* ports.c (scm_add_to_port_table): check for memory allocation error.
(scm_prinport): remove MSDOS hair.
(scm_void_port): set stream to 0 instead of SCM_BOOL_F.
(scm_close_port): don't throw errors: do it in fports.c.
(Thanks to Jorgen "forcer" Schaefer.)
* ports.h (SCM_NOFTELL): New flag.
* fports.c (local_fgets): If it's set, use the generic fgets.
* socket.c (scm_socket): Set SCM_NOFTELL on the ports we produce.
fports.c; don't just throw them together anywhere.
* fports.c (scm_stdio_to_port): Make NAME a SCM value, which is
what the rest of Guile wants. Don't set the revealed count;
that's only appropriate for stdin, stdout, stderr.
(scm_standard_stream_to_port): This function does set the revealed
count.
* init.c (scm_init_standard_ports): Use scm_standard_stream_to_port,
not scm_stdio_to_port.
* filesys.c (scm_open): Call scm_stdio_to_port; don't write it out.
* fports.c (scm_open_file): Same.
* posix.c (scm_pipe): Same.
* socket.c (scm_sock_fd_to_port): Same.
* ioext.c (scm_fdopen): Same.
(scm_freopen): Moved from here to...
* fports.c (scm_freopen): ... here. This is really something that
munges the internals of an fport, so it should go here.
* fports.h (scm_stdio_to_port): Adjust prototype.
(scm_standard_stream_to_port, scm_freopen): New protoypes.
* ioext.h (scm_freopen): Prototype removed.
* stime.c (tzset): If tzset isn't provided, make it a NOP.
(scm_localtime): Change SCM_EOF to SCM_EOL.
(scm_mktime): Likewise.
* socket.c: Don't include sys/un.h unless autoconf tells
us Unix domain sockets are available.
(scm_fill_sockaddr): Ignore Unix domain code.
(scm_addr_vector): Likewise.
(scm_init_addr_buffer): Likewise.
(scm_socketpair): Don't include unless socketpair was
found during autoconf.
* simpos.c (SYSTNAME): Treat cygwin like Unix.
* scmsigs.c (scm_pause): Don't include unless pause was found
during autoconf.
* posix.c (scm_getgroups): Don't include unless support function
was found during autoconf (in this case, getgroups).
(scm_setpwent): For setpwent.
(scm_setegid): For setegid.
* net_db.c (scm_inet_netof): Don't include unless support
function was found during autoconf (in this case, inet_netof).
(scm_lnaof): For inet_lnaof.
(scm_inet_makeaddr): For inet_makeaddr.
(scm_getnet): For getnetent, getnetbyname, getnetbyaddr.
(scm_getproto): For getprotoent.
(scm_getserv): For getservent.
(scm_sethost): For sethostent, endhostent.
(scm_setnet): For setnetent, endnetent.
(scm_setproto): For setprotoent, endprotoent.
(scm_setserv): For setservent, endservent.
* scmconfig.h.in: Regenerated.
* stime.c (tzset): If tzset isn't provided, make it a NOP.
(scm_localtime): Change SCM_EOF to SCM_EOL.
(scm_mktime): Likewise.
* socket.c: Don't include sys/un.h unless autoconf tells
us Unix domain sockets are available.
(scm_fill_sockaddr): Ignore Unix domain code.
(scm_addr_vector): Likewise.
(scm_init_addr_buffer): Likewise.
(scm_socketpair): Don't include unless socketpair was
found during autoconf.
* simpos.c (SYSTNAME): Treat cygwin like Unix.
* scmsigs.c (scm_pause): Don't include unless pause was found
during autoconf.
* posix.c (scm_getgroups): Don't include unless support function
was found during autoconf (in this case, getgroups).
(scm_setpwent): For setpwent.
(scm_setegid): For setegid.
* net_db.c (scm_inet_netof): Don't include unless support
function was found during autoconf (in this case, inet_netof).
(scm_lnaof): For inet_lnaof.
(scm_inet_makeaddr): For inet_makeaddr.
(scm_getnet): For getnetent, getnetbyname, getnetbyaddr.
(scm_getproto): For getprotoent.
(scm_getserv): For getservent.
(scm_sethost): For sethostent, endhostent.
(scm_setnet): For setnetent, endnetent.
(scm_setproto): For setprotoent, endprotoent.
(scm_setserv): For setservent, endservent.
(scm_freopen): use RO string macros for filename and modes.
(scm_duplicate_port, scm_fdopen): use RO string macros for modes.
* posix.c (scm_getgrgid): simplify conversion of name to C string.
(scm_mknod): use RO string macros for path.
* socket.c (scm_fill_sockaddr, scm_send, scm_sendto):
use SCM_ROSTRINGP, SCM_ROCHARS, SCM_ROLENGTH.
* net_db.c (scm_gethost, scm_getnet, scm_getproto, scm_getserv):
use SCM_ROSTRINGP and SCM_ROCHARS.
* Makefile.am: remove AWK=@AWK@.
Add a rule for generating errnos.list.
(CLEANFILES): put errnos.list here instead of in DISTCLEANFILES.
* configure.in: add AC_SUBST(AWK) and AC_SUBST(ERRNO_EXTRACT).
don't extract errnos, just set a variable (avoids the
need to recompile error.c just because configure is run.)
* unif.h: update prototypes.
* unif.c (scm_uniform_array_read,write): change the offset and
length arguments to start and end, for consistency.
* __scm.h: uncomment SCM_ARG6 and SCM_ARG7, I needed SCM_ARG6.
* ioext.h: update prototypes.
* * ioext.c (scm_read_delimited_x): replaces scm_read_line and
scm_read_line_x, it's a more general procedure using an
interface from scsh. read-line and read-line! are now defined
in boot-9.scm.
* Note that the new read-line trims the terminator
by default, previously it was appended to the returned string. An
optional argument specifies how to process the terminator (scsh
compatible). For the old behaviour: (read-line port 'concat).
scm_read_line, scm_read_line_x: deleted. (read-line port 'split)
returns a pair, but is converted to multiple values if the scsh
module is loaded.
socket.h: update prototypes.
* socket.c (scm_recvfrom): for consistency with other procedures,
take start and end as separate optional arguments.
* (scm_recv, scm_recvfrom): don't allow the second argument
to be a size, only a buffer. Change the scheme names to
recv! and recvfrom!. Don't return the buffer.
* ioext.h, posix.h: move prototypes too.
* ioext.c, posix.c (scm_read_line, scm_read_line_x, scm_write_line:
moved back from posix.c to ioext.c. Also move #includes of "genio.h"
"read.h" and "unif.h".
* ioext.c: include "chars.h"
primitives.
load errno.scm.
* netconst.scm: undefine maybe-define and maybe-define-so after use.
* errno.scm: new file.
* fports.c (scm_open_file): pass errno to scm_syserror_msg.
* filesys.h: update prototypes. Remove macros: SCM_FD_P, SCM_FD_FLAGS,
SCM_FD.
* filesys.c (scm_sys_stat, scm_sys_lstat): pass errno to
scm_syserror_msg.
* (scm_sys_read_fd, scm_sys_write_fd, scm_sys_close, scm_sys_lseek,
scm_sys_dup): deleted: FD capability will be added to other
procedures.
* Remove support for the FD object type: scm_tc16_fd, scm_fd_print,
scm_fd_free, fd_smob, scm_intern_fd.
* (scm_open): renamed from scm_sys_open. Return a port instead of
an FD object. Make the mode argument optional.
* (scm_sys_create): deleted, it's just a special case of open.
(scm_init_filesys): move interning of constants O_CREAT etc.,
here (were previously using SCM_CONST_LONG macro).
Add missing constants: O_RDONLY, O_WRONLY, O_RDWR, O_CREAT.
don't newsmob fd.
(numerous _sys_ procedures): remove gratuitous _sys_ from names.
include "fports.h" and <stdio.h>
(scm_stat, scm_select): don't support FD objects.
* error.h: adjust scm_syserror_msg prototype.
* error.c (scm_syserror_msg): take an extra argument for errno.
Using the global value didn't always work, since it could be
reset by procedure calls in the message or args arguments.
* fports.c (scm_setbuf0): call setbuf even if FIONREAD is not defined.
I don't understand why the check was there (and what about the
ultrix check?)
* strop.c (scm_string_copy): allow shared substrings to be copied.
* unif.h: corresponding change to prototypes.
* unif.c (scm_uniform_array_read_x, scm_uniform_array_write_x):
recognize two new optional arguments: offset and length. Allow
the port argument to be an integer (file descriptor, for scsh).
Include <unistd.h> for "read" prototype.
FIONREAD, since the latter doesn't detect EOF.
Throw error if neither select nor FIONREAD available.
* socket.c (scm_connect): take a port, not a fd object.
(scm_fill_sockaddr): throw an error if fam is not recognised.
(scm_bind): use scm_fill_sockaddr.
(scm_listen): take a port, not a fd object.
(scm_accept): take and return a port. return CDR in the car if
address can't be got
(scm_sock_fd_to_port): new procedure.
(scm_socket): use scm_sock_fd_to_port.
(scm_addr_vector): throw error if unrecognised address type.
take an extra argument with the calling procedure name.
(scm_getsockname): take a port. return #f if address can't be got.
(scm_getpeername): take a port. return #f if address can't be got.
(scm_recvfrom): take a port. return #f for address component if can't
be got.
(scm_sendto, scm_socketpair, scm_getsockopt scm_shutdown,
scm_setsockopt, scm_recv, scm_send): take a port not a fd object.
* socket.h (SCM_P): update bind prototype.
* socket.c (scm_init_socket): intern PF_UNSPEC, PF_UNIX, PF_INET.
include "feature.h".
(scm_socket): return a port, not a file descriptor object.
include "fports.h" and <unistd.h>
(scm_bind): take a port, not a file descriptor object.
take an extra argument for address args.
* net_db.c (scm_init_net_db): intern INADDR_ANY, INADDR_BROADCAST,
INADDR_NONE, INADDR_LOOPBACK.
* init.c: include net_db.h and not fdsocket.h.
(scm_boot_guile_1): call scm_init_net_db and not scm_init_fdsocket.
* Makefile.am: corresponding changes.
* socket.h: renamed from fdsocket.h, fix names.
* net_db.h: renamed from socket.h, fix names.
* socket.c: renamed from fdsocket.c.
remove _sys from procedure names.
(scm_init_socket): rename from scm_init_fdsocket. include socket.x.
add "socket" to features list.
* net_db.c: renamed from socket.c.
remove _sys from procedure names.
(scm_init_net_db): rename from scm_init_socket. include net_db.x.
add "net-db" to features list.
include "net_db.h". don't include <sys/socket.h> or
<sys/un.h>.
wta for range errors (ASSERT still needs work).
* error.c, error.h (scm_out_of_range): new procedure.
* error.c, error.h (scm_out_of_range_key): new key.
* posix.c (scm_sync): #else was missing.
* error.c, error.h: append _key to names scm_num_overflow and
scm_system_error.
* __scm.h (SCM_SYSMISSING, SCM_NUM_OVERFLOW): use SCM_BOOL_F instead
of consing an empty list.
(SCM_SYSERROR etc.): move into error.c, make them procedures instead
of macros, saves code and string space.
error.c, fports.c, numbers.c, posix.c, ioext.c, filesys.c, socket.c,
fdsocket.c, simpos.c: change names of SCM_SYSERROR etc., to
lower case. Rename scm_syserror_m to scm_syserror_msg.
error.h: prototypes for new procedures.
