and we don't want that.
(INCLUDES): Removed all -I options except for the root source
directory and the root build directory.
* *.*: Change includes so that they always use the "prefixes"
libguile/, qt/, guile-readline/, or libltdl/.
(Thanks to Tim Mooney.)
the fdes is valid before doing anything else. check that
the file descriptor supports the modes required.
(scm_fport_buffer_add): don't throw an error if fstat doesn't
work: just use the default buffer size.
* throw.c: change an outdated comment about scm_internal_catch
BODY: it doesn't take a jumpbuf arg.
* init.c (scm_standard_stream_to_port): install a handler in case
scm_fdes_to_port throws an error. don't check here whether the
file descriptor is valid, since scm_fdes_to_port will do that.
set the revealed count depending on whether the port got the
standard file descriptor.
(stream_body_data): new type.
(stream_body, stream_handler): new procs.
displaying the expected type. Use SCM_LISTn in a couple places
instead of scm_cons-ing by hand.
* __scm.h: Added SCM_ASSERT_TYPE macro.
* validate.h, scm_validate.h: Added the former, as a renamed
version of the latter with SCM_ASSERT_TYPE used in
SCM_MAKE_VALIDATE (instead of just SCM_ASSERT)
* Makefile.am: Rename scm_validate.h to validate.h.
* *.c, *.h: Include validate.h, not scm_validate.h (old name's
prefix was superfluous).
added append docs from R4RS.
* strings.c: Docstring typo fix, + eliminate unneeded IMP tests.
Thanks Dirk Hermann!
* chars.h: Provide SCM_CHARP, SCM_CHAR, SCM_MAKE_CHAR and
deprecate SCM_ICHRP, SCM_ICHR, SCM_MAKICHR. Thanks Dirk Hermann!
* *.h, *.c: Use SCM_CHARP, SCM_CHAR, SCM_MAKE_CHAR throughout.
Drop use of SCM_P for function prototypes... assume an ANSI C
compiler. Thanks Dirk Hermann!
SCM_OUT_OF_RANGE use SCM_MAKINUM, not scm_long2num. Added
SCM_COERCE_ROSTRING macro. Added SCM_VALIDATE_NONEMPTYLIST
macro. Fix SCM_VALIDATE_STRINGORSUBSTR macro to not use SLOPPY
variants.
* ports.c (scm_port_closed_p): Validate that the arg is a PORT,
then return whether it's an open port (was validating that it was
an open port -- this was a bug I introduced back in December, but
my careful reading of diffs caught it).
* numbers.c: Recombine the two conditional-compilation paths for
all the log* primitives -- they were split based on #ifndef
scm_long2num; factored out a SCM_LOGOP_RETURN macro, and fixed
some bugs and inconsistencies in the two sets of implementations.
(scm_lognot) Fixed *atrocious* re-use of a SCM as an integer!
* ioext.c: Use SCM_ASSERT_RANGE in a couple places, and
SCM_VALIDATE_INUM_COPY once where it should've been used.
* fluids.c (scm_internal_with_fluids): Use
SCM_VALIDATE_LIST_COPYLEN.
* filesys.c: Use SCM_NUM2LONG instead of SCM_VALIDATE_INUM_COPY;
this is questionable as it relaxes type safety, but other changes
were useful and all SCM_NUM2LONG's should probably be
revisited. Use SCM_OUT_OF_RANGE, SCM_WRONG_TYPE_ARG.
* evalext.c: line-break change on 1 line.
* eval.c (nconc2last): Takes a non-empty list as its first
argument, not just a list.
* dynl.c: Use new SCM_COERCE_ROSTRING macro.
* scm_validate.h: Added SCM_VALIDATE_THREAD.
* *.c: Remove SCM_NIMP(X) when it is an extraneous pre-test given
that SCM_FOOP macros all now include SCM_NIMP in their expansion.
This simplifies lots of code, making it far more readable.
GUILE_PROC1. Build guile-procedures.txt, and add that file to
pkgdata_DATA.
* load.c: Added `pkgdata-dir', `site-dir', `library-dir'
primitives.
* guile-doc-snarf.awk: Drop trailing space when no arguments:
e.g., "(foo )" is now "(foo)".
* *.c: moved all the documentation for primitives from
guile-doc/ref/{appendices,posix,scheme}.texi into the source code.
This leaves about half of the primitives undocumented. Also, all
the markup is currently still texinfo. I don't have a problem
with texinfo per se, but the markup is not very descriptive or
accurate.
function headers and argument checking. Switched SCM_PROC,
SCM_PROC1 macros to be GUILE_PROC, GUILE_PROC1 (may change names
later, but was useful to keep old versions around while migrate)
that has docstrings and argument lists embedded in the GUILE_PROC
macro invocations that expand into a function header. Use lots of
new SCM_VALIDATE_* macros to simplify error checking and reduce
tons of redundancy. This is very similar to what I did for Scwm.
Note that none of the extraction of the docstrings, nor software
engineering checks of Scwm is yet added to Guile. I'll work on
that tomorrow, I expect.
* Makefile.am: Added scm_validate.h to modinclude_HEADERS.
* chars.c: Added docstrings for the primitives defined in here.
* snarf.h: Added GUILE_PROC, GUILE_PROC1. Added
SCM_REGISTER_PROC to be like old SCM_PROC, though old SCM_PROC
still remains for now. Changed naming convention for the s_foo
string name of the primitive to be s_scm_foo for ease of use with
the macro.
* scm_validate.h: Lots of new SCM_VALIDATE macros to simplify
argument checking through guile. Maybe some of these should be
folded into the header file for the types they check, but for now
it was easiest to just stick them all in one place.
* ports.c (scm_seek): one more: was scm_lseek. Also changed the
Scheme name from lseek to seek, but lseek was added recently so
it shouldn't be a big problem.
* ports.c, gdbint.c, ioext.c: changed callers.
* fports.c (fport_input_waiting): if select is used, return 1
instead of whatever FD_ISSET expands to. maybe it will be useful
to interpret the value from the input_waiting ptob procedure as a
lower bound on the number of bytes available.
* Mikael asked for a few names to be changed...
* ports.c (scm_make_port_type): take the write procedure as the
second argument instead of the flush procedure.
* ports.h (scm_ptob_descriptor): rename the ptob procedures:
fflush -> flush, read_flush -> end_input, fclose -> close,
fill_buffer -> fill_input, ftruncate -> truncate,
input_waiting_p -> input_waiting.
* ports.c (end_input_void_port): was read_flush_void_port.
(scm_set_port_end_input): was scm_set_port_flush_input.
(scm_set_port_flush): was scm_set_port_write.
(scm_set_port_input_waiting): was scm_set_port_input_waiting_p
(scm_end_input): was scm_read_flush.
(scm_fill_input): was scm_fill_buffer.
(scm_flush): was scm_fflush.
* fports.c (fport_input_waiting): renamed from fport_input_waiting_p.
(fport_end_input): was local_read_flush.
(fport_flush): was local_fflush.
(fport_close): was local_fclose.
(fport_truncate): was local_ftruncate.
(fport_seek): was local_seek.
(fport_free): was local_free.
(fport_fill_input): was fport_fill_buffer.
* strports.c (st_end_input): was st_read_flush.
(st_truncate): was st_ftruncate.
* vports.c: (sf_flush): was sfflush.
(sf_close): was sfclose.
(sf_fill_input): was sf_fill_buffer.
* ports.c, fports.c, strports, vports.c, ioext.c, unif.c, filesys.c:
change callers.
* unif.c (scm_uniform_array_read_x), ports.c (scm_getc): increment
read_pos after scm_fill_buffer.
* ioext.c (scm_do_read_line): simplify by ignoring the fill_buffer
return char.
* vports.c (sf_fill_buffer), strports.c (stfill_buffer),
fports.c (fport_fill_buffer): implement the interface change.
* ports.c (scm_fill_buffer): interface change: no longer increments
read_pos past the character that's returned. it seems clearer to
leave it to the caller to decide what to do (thanks Jim).
* vports.c (sf_fill_buffer): put the read char into the buffer
as well as returning it.
* ports.c (scm_grow_port_cbuf): residue of this deleted procedure
deleted.
* unif.c (scm_uniform_array_write): likewise.
* ioext.c (scm_redirect_port): likewise.
* ports.c (scm_putc): call scm_read_flush.
(scm_puts): likewise.
(scm_lfwrite): likewise.
(scm_lseek): likewise.
(scm_ftruncate): likewise.
* ports.c (scm_fill_buffer): don't take pt argument. change callers.
(read_flush_void_port): new proc, for void port ptob.
* vports.c (sf_read_flush): likewise.
* strports.c (st_read_flush): take offset arg.
* fports.c (local_read_flush): use offset, don't reset putback
buffer here.
* ports.h (scm_ptobfuns): let read_flush take an offset argument,
which is the number of chars from the putback buffer.
* ports.c (scm_read_flush): new procedure, resets the putback
buffer before calling the ptob routine.
* fports.c, fports.h, gc.c, gdbint.c, ioext.c, ports.c, ports.h,
scmsigs.c, strports.c, vports.c: Install the sources which
actually correspond to the changes described below. I got the
ChangeLog entries and the patch from two different places...
newline. A bit faster, and definitely hairier.
(scm_read_line): Count newlines here instead.
* strings.c (scm_take_str): New function.
(scm_take0str): Reimplement in terms of scm_take_str. * strings.h
(scm_take_str): New declaration. * ioext.c (scm_read_line): Use
scm_take_str, to avoid copying the string.
Add some simple-minded support for line buffered ports.
* ports.h (SCM_BUFLINE): New flag for ports.
* init.c (scm_init_standard_ports): Request line-buffering on
the standard output port.
* * ports.c (scm_mode_bits): Recognize 'l' as a request for line
buffering.
(scm_putc, scm_puts, scm_lfwrite): If the port is line-buffered,
and there's a newline to be written, flush the port.
* ports.c: (scm_lseek): clear buffers even if just reading current
position.
* fports.c (local_fclose): call local_fflush unconditionally.
(various): don't use the scm_must... memory procs.
* ports.h (scm_port): make read_pos a pointer to const.
strports.c: take care of rw_active and rw_randow.
fports.c: scm_fport_drain_input: removed. do it all in ports.c.
strports.c (scm_mkstrport): check that pos is reasonable.
ioext.c (scm_ftell, scm_fseek): use lseek.
(SCM_CLEAR_BUFFERS): macro deleted.
ioext.c (redirect_port: use ptob fflush, read_flush.
ports.h (scm_ptobfuns): add ftruncate.
ports.c (scm_newptob): set ftruncate.
adjust ptob tables.
* ports.c (scm_ftruncate): new procedure.
fports.c (local_ftrunate), strports.c (str_ftruncate): new procs.
strports.c (st_seek, st_grow_port): new procs.
fports.h (scm_port): change size types from int to off_t.
ports.c (scm_init_ports): initialise the seek symbols here
instead of in ioext.c.
strports.c (scm_call_with_output_string): start with an empty
string, so seek and ftruncate can be used.
* ports.h (scm_ptobfuns): add a read_flush procedure which is the
equivalent to fflush for the read buffer.
* ports.c (scm_newptob): set read_flush.
ports.c (void_port_ptob): set read_flush.
fports.c (local_read_flush): new proc. add to ptob.
strport.c (st_read_flush): likewise.
vport.c (sf_read_flush): likewise.
fports.h (struct scm_fport): remove random member. there's nothing
left but fdes. leaving it as a struct to allow for future changes.
fports.c: replace usage of scm_fport::random with scm_port::rw_random.
ports.c: (scm_putc, scm_puts, scm_lfwrite): call the read_flush
ptob proc if the read buffer is filled.
* ports.h (scm_port): add a rw_random member and replace
reading and writing members with rw_active member.
SCM_PORT_READ/SCM_PORT_WRITE: new values.
* ports.h (struct scm_port_table): add writing and reading members
to replace write_needs_seek: it isn't good enough for non-fports.
ports.c, ioext.c, fports.c: corresponding changes.
(struct scm_port_table): give it a typedef and rename to scm_port.
ports.c, fports.c, strports.c, vports.c, ioext.c, ports.h:
corresponding changes.
* ports.c (scm_newptob): bugfix: set seek member.
* * (scm_lseek): new procedure, using code from ioext.c:scm_fseek
and generalised to all port types.
* scmsigs.c (scm_init_scmsigs): set the SA_RESTART flag for all
signals (it was only being done for handlers installed from Scheme).
Otherwise (for example) SIGSTOP followed by SIGCONT on an interpreter
waiting for input caused an EINTR error from read.
* ports.h (struct scm_port_table): make all the char members
unsigned, so they convert to int without becoming negative if large.
* fports.c (scm_fdes_wait_for_input): forgot to check compilation
with threads enabled. rename this procedure to
fport_wait_for_input and take a port instead of a fdes.
use scm_fport_input_waiting_p instead of scm_fdes_waiting_p.
* readline.c (scm_readline): Applied a patch from Greg Harvey to
get readline support working again: use fdopen to get FILE objects.
* gc.c (scm_init_storage): install an atexit proc to flush the
ports.
(cleanup): the new proc. it sets a global variable which can be
checked by the ptob flush procs to avoid trying to throw
exceptions during exit. not very pleasant but it seems more reliable.
* fports.c (local_fflush): check terminating variable and if set
don't throw exception.
* CHECKME: that the atexit proc is installed if unexec used.
* throw.c (scm_handle_by_message): don't flush all ports here.
it still causes bus errors.
* fports.h (SCM_FPORT_CLEAR_BUFFERS): rename to SCM_CLEAR_BUFFERS
and move to ioext.c.
* fports.c (scm_fdes_waiting_p): merged into fport_input_waiting_p.
* ports.c (scm_char_ready_p): check the port buffer and call the
ptob entry if needed.
* ports.h (scm_ptobfuns): input_waiting_p added. change all the
ptob initialisers. use it in char-ready
* ioext.c (scm_do_read_line): moved from ports.c. make it static.
* vports.c (sfflush): modified to write a char (since softports
currently use shortbuf.)
* fports.c (scm_standard_stream_to_port): moved to init.c and
made static.
* init.c (scm_init_standard_ports): make stdout and stderr
unbuffered if connected to a terminal. with stdio they
were line-buffered by default.
* ports.h (scm_ptobfuns): change fflush return to void.
change flush proc definitions.
* strports.c (scm_call_with_output_string): get size from
buffer instead of port stream.
(scm_strprint_obj): likewise.
(st_flush): new proc.
* ports.h (struct scm_port_table): added write_end member,
as an optimisation. set it where write_buf_size is set.
* ports.h (struct scm_port_table): change stream from void *
back to SCM. SCM presumably must be large enough to hold a
pointer (and probably vice versa but who knows.)
(SCM_SSTREAM): deleted. change users back to SCM_STREAM.
(scm_puts): rewritten
* fports.c (local_ffwrite, local_fputs): removed.
* strports.c (stputc, stputs, stwrite): dyked out (FIXME)
* vports.c (sfputc, sfputs, sfwrite) likewise.
* ports.c (write_void_port, puts_void_port): removed.
(putc_void_port, getc_void_port, fgets_void_port): likewise.
* ports.c (scm_lfwrite): rewritten using fport.c version.
* fports.c (local_fputc): deleted.
* ports.c (scm_add_to_port_table): initialise write_needs_seek.
* ports.h (scm_ptobfuns): add seek function pointer.
* fports.c: set it to local_seek, new procedure.
* fports.h (SCM_MAYBE_DRAIN_INPUT): moved to ports.c.
use ptob for seek. take ptob instead of fport arg.
* ports.h (struct scm_port_table): new member write_needs_seek,
replaces reading member in fport struct.
* vports.c (sfgetc): store the getted char into the buffer.
rename to sf_fill_buffer and install it for fill-buffer in ptob.
the Scheme interface is still a procedure that gets a char.
(scm_make_soft_port): set up the port buffer (shortbuf).
* fports.c (local_fgetc, local_fgets): deleted.
* strports.c (stgetc): likewise.
* ports.c: scm_generic_fgets: likewise.
* ports.h (scm_ptobfuns): add fill_buffer.
* ports.c (scm_newptob): assign it.
* strports.c (scm_mkstrport): set up the buffer.
put just the string into the stream, not cons (pos stream).
(stfill_buffer): new proc.
* ports.h: fport buffer moved into port table: to be
used for all port types.
* throw.c (scm_handle_by_message): flush ports at exit.
* socket.c (scm_sock_fd_to_port): use scm_fdes_to_port.
(scm_getsockopt, scm_setsockopt, scm_shutdown, scm_connect,
scm_bind, scm_listen, scm_accept, scm_getsockname,
scm_getpeername, scm_recv, scm_send, scm_recvfrom,
scm_sendto,
use SCM_FPORT_FDES. use SCM_OPFPORTP not SCM_FPORTP.
* posix.c (scm_getgroups): use SCM_ALLOW/DEFER_INTS.
(scm_ttyname): use SCM_FPORT_FDES.
(scm_tcgetpgrp, scm_tcsetpgrp): likewise.
* ioext.c (scm_isatty_p): use SCM_FPORT_FDES.
(scm_fdes_to_ports): modified.
(scm_fdopen): use scm_fdes_to_port.
* ports.c (scm_init_ports): don't try to flush ports using
atexit(). it's too late, errors will cause SEGV.
* fports.c (scm_fport_buffer_add): new procedure.
* fports.h (SCM_FDES_RANDOM_P): new macro. use it in
scm_fdes_to_port and scm_redirect_port.
* ioext.c (scm_redirect_port): use setvbuf to set buffers in the
new port. reset fp->random.
* fports.c (scm_fdes_to_port), ports.c (scm_void_port),
filesys.c (scm_opendir):
restore defer interrupts while the port is constructed.
* (scm_setvbuf): if mode is _IOFBF and size is not supplied,
derive buffer size from fdes or use a default.
(scm_fdes_to_port): use setvbuf instead of creating the buffers
directly.
vports.c (various places): use SCM_SSTREAM.
strports.c: likewise.
* gdbint.c: likewise.
* ports.h (SCM_SSTREAM): new macro.
* fports.c (scm_input_waiting_p): use scm_return_first, since port
may be removed from the stack by the tail call to scm_fdes_waiting_p.
* fports.h (SCM_CLEAR_BUFFERS): new macro.
* ports.c (scm_force_output): call scm_fflush.
* print.c (scm_newline): don't check errno for EPIPE (it wouldn't
* reach this point.) don't flush port (if scm_cur_outp).
* fports.h (SCM_FPORT_FDES): new macro.
* vports.c (sfflush): don't need to set errno.
* ports.c: install scm_flush_all_ports to be run on exit.
ports.c fports.c ioext.c posix.c socket.c net_db.c filesys.c:
removed all uses of SCM_DEFER/ALLOW ints for now. they were mainly
just protecting errno. some may need to be put back.
* scmsigs.c (take_signal): save and restore errno while this
proc runs.
*fports.c (print_pipe_port, local_pclose, scm_pipob): deleted.
* open-pipe, close-pipe are emulated in (ice-9 popen)
ports.c (scm_ports_prehistory): don't init scm_pipob.
ports.h (scm_tc16_pipe): deleted.
posix.c (scm_open_pipe, scm_close_pipe): deleted.
* ioext.c (scm_primitive_move_to_fdes): use fport.
* fport.c (scm_fport_fill_buffer): flush write buffer if needed.
change arg type from scm_fport to SCM port.
fport.h (SCM_SETFDES): removed.
(SCM_MAYBE_DRAIN_INPUT): new macro.
* ioext.c (scm_dup_to_fdes): use SCM_FSTREAM.
(scm_ftell): always use lseek and account for the buffer.
(scm_fileno): use fport buffer.
(scm_fseek): clear fport buffers. always use lseek.
* posix.c (scm_pipe): use fport buffer.
* unif.c: include fports.h instead of genio.h.
* fports.c (scm_fdes_wait_for_input, scm_fport_fill_buffer): new
procedures.
(local_fgetc): use them.
(local_ffwrite): use buffer.
(local_fgets): use buffer.
(scm_setbuf0): deleted.
(scm_setvbuf): set the buffer.
(scm_setfileno): deleted.
(scm_evict_ports): set fdes directly.
* (scm_freopen): deleted. doesn't seem useful in Guile.
(scm_stdio_to_port): deleted.
fports.h (struct scm_fport): add shortbuf member to avoid separate
code for unbuffered ports.
(SCM_FPORTP, SCM_OPFPORTP, SCM_OPINFPORTP, SCM_OPOUTFPORTP): moved
from ports.h.
* genio.c, genio.h: move contents into ports.c, ports.h. The
division wasn't useful.
* fports.c, fports.h (scm_fport_drain_input): new procedure.
* ports.c (scm_drain_input): call scm_fport_drain_input.
* scm_fdes_waiting_p: new procedure.
* fports.c (scm_fdes_to_port): allocate read and/or write buffers.
(scm_input_waiting_p): check the buffer.
(local_fgetc, local_fflush, local_fputc): likewise.
* fports.h (scm_fport): read/write_buf,_pos,_buf_end,,_buf_size:
new members.
* init.c (scm_init_standard_ports): pass fdes instead of FILE *.
* * ports.c (scm_drain_input): new procedure.
ports.h: prototype.
* fports.c (FPORT_READ_SAFE, FPORT_WRITE_SAFE, FPORT_ALL_OKAY,
pre_read, pre_write): removed.
(local_fputc, local_fputs, local_ffwrite): use write, not stdio.
(scm_standard_stream_to_port): change first arg from FILE * to
int fdes.
(local_fflush): flush fdes, not FILE *.
* fports.h (SCM_NOFTELL): removed.
* genio.c, ports.c: don't include filesys.h.
* genio.c (scm_getc): don't use scm_internal_select if FPORT.
do it in fports.c:local_fgetc.
* genio.c: don't use SCM_SYSCALL when calling ptob procedures.
do it where it's needed in the port smobs.
* filesys.c (scm_input_waiting_p): moved to fports.c, stdio
buffer support removed. take SCM arg, not FILE *.
* filesys.h: prototype moved too.
* fports.c (scm_fdes_to_port): new procedure.
(local_fgetc): use read not fgetc.
(local_fclose): use close, not fclose.
(local_fgets): use read, not fgets
* fports.h: prototype for scm_fdes_to_port.
* fports.h (scm_fport): new struct.
* fports.c (scm_open_file): use open, not fopen.
#include fcntl.h
* ports.h (struct scm_port_table): change stream from SCM to void *.
* ports.c (scm_add_to_port_table): check for memory allocation error.
(scm_prinport): remove MSDOS hair.
(scm_void_port): set stream to 0 instead of SCM_BOOL_F.
(scm_close_port): don't throw errors: do it in fports.c.
fports.c; don't just throw them together anywhere.
* fports.c (scm_stdio_to_port): Make NAME a SCM value, which is
what the rest of Guile wants. Don't set the revealed count;
that's only appropriate for stdin, stdout, stderr.
(scm_standard_stream_to_port): This function does set the revealed
count.
* init.c (scm_init_standard_ports): Use scm_standard_stream_to_port,
not scm_stdio_to_port.
* filesys.c (scm_open): Call scm_stdio_to_port; don't write it out.
* fports.c (scm_open_file): Same.
* posix.c (scm_pipe): Same.
* socket.c (scm_sock_fd_to_port): Same.
* ioext.c (scm_fdopen): Same.
(scm_freopen): Moved from here to...
* fports.c (scm_freopen): ... here. This is really something that
munges the internals of an fport, so it should go here.
* fports.h (scm_stdio_to_port): Adjust prototype.
(scm_standard_stream_to_port, scm_freopen): New protoypes.
* ioext.h (scm_freopen): Prototype removed.
ioext.c (%read-line): Return a cons of the input line and its terminator.
fports.c, genio.c, genio.h, ports.c, ports.h: Change fgets methods
to return the string length as well as its contents.
* fports.c (scm_fgets): Use malloc/free rather than scm_must_malloc
and scm_must_free, since ultimately the string returned will be copied
by scm_makfrom0str anyway. Also, read any characters that may have
been pushed onto the port with scm_ungetc.
* ports.c (scm_generic_fgets): Same as for scm_fgets.
* ioext.c (scm_read_line): Free string after Guilifying it.
* ports.h (scm_ptobfuns): fgets method returns a char *, not a char.
* stime.c (scm_times): new procedure.
* ioext.c (scm_fseek): if the first argument is a file descriptor
call lseek.
(scm_ftell): if the first argument is a file descriptor call lseek
(sic).
* filesys.h: prototypes for scm_open_fdes, scm_fsync.
* filesys.c (scm_chmod): if the first argument is a file descriptor,
call fchmod.
(scm_chown): if the first argument is a port or file descriptor,
call fchown.
(scm_truncate_file): new procedure.
Add DEFER/ALLOW INTS to a few other procedures.
(scm_fsync): new procedure.
(scm_open_fdes): new procedure.
(scm_open): use scm_open_fdes. If mode isn't specified, 666 will
now be used.
(scm_fcntl): the first argument can now be a file descriptor. The
third argument is now optional.
* posix.c (scm_execl, scm_execlp): make the filename argument
compulsory, since omitting it causes SEGV.
(scm_sync): return unspecified instead of #f.
(scm_execle): new procedure.
(environ_list_to_c): new procedure.
(scm_environ): use environ_list_to_c. disable interrupts.
(scm_convert_exec_args): take pos and subr arguments and
improve error checking.
* boot-9.scm: define tms accessors: clock, utime, stime, cutime,
cstime.
* ioext.c (scm_dup_to_fdes): renamed from scm_primitive_dup2.
Scheme name is now dup->fdes.
(scm_dup_to_fdes): make the second argument optional and
fold in the functionality of scm_primitive_dup.
(scm_primitive_dup): deleted.
* fports.h (SCM_P): prototypes for scm_setvbuf, scm_setfileno.
* fports.c (scm_setbuf0): don't disable the setbuf if MSDOS or
ultrix are defined. Use setvbuf instead of setbuf.
(scm_setvbuf): new procedure.
(scm_init_fports): intern _IOFBF, _IOLBF, _IONBF.
(scm_setfileno): moved from ioext.c.
(scm_fgets): cast SCM_STREAM to (FILE *), remove unused lp variable.
(top of file): Delete 25 lines of probably obsolete CPP hair for MSDOS.
* boot-9.scm (move->fdes, dup->port): use dup->fdes, not primitive-dup.
(dup->fdes): deleted, now done in C.
* ioext.c (scm_primitive_dup2): return the new file descriptor
instead of SCM_UNSPECIFIED, since similarity to scm_primitive_dup
is convenient.
(scm_fdopen): bug fix: don't try to make port unbuffered until its
stream has been set.
(scm_duplicate_port): deleted, there's now an implementation in
boot-9.scm.
(scm_primitive_dup2): do nothing if newfd == oldfd.
* boot-9.scm (dup->port, dup->inport, dup->outport, dup->fdes,
dup, fdes->inport, fdes->outport, port->fdes): new procedures.
(duplicate-port): was a C primitive, now it's here.
(move->fdes): allow the first argument to be a file descriptor.
Return the modified port or file descriptor (was unspecified.)
SCM_THREAD_CRITICAL_SECTION_START/END unless USE_THREADS is defined.
* ports.h: prototypes too.
* ports.c (scm_mode_bits, scm_port_mode): moved from fports.c.
* fports.h: prototype too.
* fports.c (scm_evict_ports): moved from ioext.c.
* ports.c (scm_close_port): return a boolean instead of unspecified.
throw an error if an error other than EBADF occurs.
* filesys.h: scm_close prototype.
* filesys.c (scm_close): new procedure, can close file descriptors
and ports (scsh compatible).
* ports.c (scm_flush_all_ports): SCM_PROC incorrectly allowed an
optional argument.
scm_misc_error.
* stime.c (scm_localtime): copy the result of localtime before
calling gmtime in case they share a buffer.
(scm_localtime, scm_mktime): throw an error if neither HAVE_TM_ZONE
nor HAVE_TZNAME.
wan't defined. Don't include fd.h.
* Previously fd.h was regenerated whenever configure was run,
forcing a couple of files to be recompiled.
* fd.h.in: deleted, SET_FILE_FD_FIELD moved to ioext.c.
* configure.in: AC_DEFINE FD_SETTER instead of HAVE_FD_SETTER.
Check for _fileno as well as _file.
Don't output fd.h.
* ioext.c: don't fd.h.
* acconfig.h: remove duplicate HAVE_FD_SETTER and change the
other to FD_SETTER.
* Change the stratigy for getting information about errno
(and now signal number) values, e.g., ENOSYS, SIGKILL. Instead of
generating lists of symbols during the build process, which will
not always work, include comprehensive lists in the distribution.
To help keep the lists up to date, the "check_signals" and
"check_errnos" make targets can be used.
* configure.in: don't check for a command to extract errno codes.
* Makefile.am: update file lists, remove errnos.list and errnos.c
targets, add cpp_err_symbols.c, cpp_sig_symbols.c, check_signals,
check_errnos targets.
(CLEANFILES): remove errnos.c and errnos.list, add
cpp_err_symbols_here cpp_err_symbols_diff cpp_err_symbols_new
cpp_sig_symbols_here cpp_sig_symbols_diff cpp_sig_symbols_new
* errnos.default: deleted.
* cpp_signal.c: new file.
* cpp_errno.c: renamed from errnos_get.c.
* cpp_err_symbols, cpp_sig_symbols: new files.
* cpp_cnvt.awk: renamed from errnos_cnvt_awk.
* error.c (scm_init_error): #include cpp_err_symbols instead of
errnos.c.
* posix.c (scm_init_posix): don't intern signal symbols. #include
cpp_sig_symbols.c.
* strop.c (scm_i_index): allow the lower bound to be equal to the
length of the string, so a null string doesn't always give an error.
* posix.h: new prototypes.
* posix.c (scm_status_exit_val, scm_status_term_sig,
scm_status_stop_sig): new functions, as in scsh. They break down
process status values as returned by waitpid.
(scm_freopen): use RO string macros for filename and modes.
(scm_duplicate_port, scm_fdopen): use RO string macros for modes.
* posix.c (scm_getgrgid): simplify conversion of name to C string.
(scm_mknod): use RO string macros for path.
* socket.c (scm_fill_sockaddr, scm_send, scm_sendto):
use SCM_ROSTRINGP, SCM_ROCHARS, SCM_ROLENGTH.
* net_db.c (scm_gethost, scm_getnet, scm_getproto, scm_getserv):
use SCM_ROSTRINGP and SCM_ROCHARS.
