posix.c: Eliminated a bunch of SCM_NIMP(..)s that are now
redundant with the safer macros. Patch from Dirk Hermann applied
by hand. Thanks Dirk!
* scm_validate.h: Added SCM_VALIDATE_VECTOR_OR_DVECTOR for some
uses in random.c.
* ramap.c: whitespace change.
procedure body, so that the procedure is left undefined if waitpid
is not available. previously in this case the procedure was
defined but would raise a system-error when called, which is
pointless. I intend to make the same change for other procedures
and deprecate SCM_SYSMISSING and scm_sysmissing.
* scm_validate.h: Added SCM_VALIDATE_THREAD.
* *.c: Remove SCM_NIMP(X) when it is an extraneous pre-test given
that SCM_FOOP macros all now include SCM_NIMP in their expansion.
This simplifies lots of code, making it far more readable.
GUILE_PROC1. Build guile-procedures.txt, and add that file to
pkgdata_DATA.
* load.c: Added `pkgdata-dir', `site-dir', `library-dir'
primitives.
* guile-doc-snarf.awk: Drop trailing space when no arguments:
e.g., "(foo )" is now "(foo)".
* *.c: moved all the documentation for primitives from
guile-doc/ref/{appendices,posix,scheme}.texi into the source code.
This leaves about half of the primitives undocumented. Also, all
the markup is currently still texinfo. I don't have a problem
with texinfo per se, but the markup is not very descriptive or
accurate.
function headers and argument checking. Switched SCM_PROC,
SCM_PROC1 macros to be GUILE_PROC, GUILE_PROC1 (may change names
later, but was useful to keep old versions around while migrate)
that has docstrings and argument lists embedded in the GUILE_PROC
macro invocations that expand into a function header. Use lots of
new SCM_VALIDATE_* macros to simplify error checking and reduce
tons of redundancy. This is very similar to what I did for Scwm.
Note that none of the extraction of the docstrings, nor software
engineering checks of Scwm is yet added to Guile. I'll work on
that tomorrow, I expect.
* Makefile.am: Added scm_validate.h to modinclude_HEADERS.
* chars.c: Added docstrings for the primitives defined in here.
* snarf.h: Added GUILE_PROC, GUILE_PROC1. Added
SCM_REGISTER_PROC to be like old SCM_PROC, though old SCM_PROC
still remains for now. Changed naming convention for the s_foo
string name of the primitive to be s_scm_foo for ease of use with
the macro.
* scm_validate.h: Lots of new SCM_VALIDATE macros to simplify
argument checking through guile. Maybe some of these should be
folded into the header file for the types they check, but for now
it was easiest to just stick them all in one place.
newline. A bit faster, and definitely hairier.
(scm_read_line): Count newlines here instead.
* strings.c (scm_take_str): New function.
(scm_take0str): Reimplement in terms of scm_take_str. * strings.h
(scm_take_str): New declaration. * ioext.c (scm_read_line): Use
scm_take_str, to avoid copying the string.
Add some simple-minded support for line buffered ports.
* ports.h (SCM_BUFLINE): New flag for ports.
* init.c (scm_init_standard_ports): Request line-buffering on
the standard output port.
* * ports.c (scm_mode_bits): Recognize 'l' as a request for line
buffering.
(scm_putc, scm_puts, scm_lfwrite): If the port is line-buffered,
and there's a newline to be written, flush the port.
* ports.c: (scm_lseek): clear buffers even if just reading current
position.
* fports.c (local_fclose): call local_fflush unconditionally.
(various): don't use the scm_must... memory procs.
* ports.h (scm_port): make read_pos a pointer to const.
strports.c: take care of rw_active and rw_randow.
fports.c: scm_fport_drain_input: removed. do it all in ports.c.
strports.c (scm_mkstrport): check that pos is reasonable.
ioext.c (scm_ftell, scm_fseek): use lseek.
(SCM_CLEAR_BUFFERS): macro deleted.
ioext.c (redirect_port: use ptob fflush, read_flush.
ports.h (scm_ptobfuns): add ftruncate.
ports.c (scm_newptob): set ftruncate.
adjust ptob tables.
* ports.c (scm_ftruncate): new procedure.
fports.c (local_ftrunate), strports.c (str_ftruncate): new procs.
strports.c (st_seek, st_grow_port): new procs.
fports.h (scm_port): change size types from int to off_t.
ports.c (scm_init_ports): initialise the seek symbols here
instead of in ioext.c.
strports.c (scm_call_with_output_string): start with an empty
string, so seek and ftruncate can be used.
* ports.h (scm_ptobfuns): add a read_flush procedure which is the
equivalent to fflush for the read buffer.
* ports.c (scm_newptob): set read_flush.
ports.c (void_port_ptob): set read_flush.
fports.c (local_read_flush): new proc. add to ptob.
strport.c (st_read_flush): likewise.
vport.c (sf_read_flush): likewise.
fports.h (struct scm_fport): remove random member. there's nothing
left but fdes. leaving it as a struct to allow for future changes.
fports.c: replace usage of scm_fport::random with scm_port::rw_random.
ports.c: (scm_putc, scm_puts, scm_lfwrite): call the read_flush
ptob proc if the read buffer is filled.
* ports.h (scm_port): add a rw_random member and replace
reading and writing members with rw_active member.
SCM_PORT_READ/SCM_PORT_WRITE: new values.
* ports.h (struct scm_port_table): add writing and reading members
to replace write_needs_seek: it isn't good enough for non-fports.
ports.c, ioext.c, fports.c: corresponding changes.
(struct scm_port_table): give it a typedef and rename to scm_port.
ports.c, fports.c, strports.c, vports.c, ioext.c, ports.h:
corresponding changes.
* ports.c (scm_newptob): bugfix: set seek member.
* * (scm_lseek): new procedure, using code from ioext.c:scm_fseek
and generalised to all port types.
* scmsigs.c (scm_init_scmsigs): set the SA_RESTART flag for all
signals (it was only being done for handlers installed from Scheme).
Otherwise (for example) SIGSTOP followed by SIGCONT on an interpreter
waiting for input caused an EINTR error from read.
* ports.h (struct scm_port_table): make all the char members
unsigned, so they convert to int without becoming negative if large.
* fports.c (scm_fdes_wait_for_input): forgot to check compilation
with threads enabled. rename this procedure to
fport_wait_for_input and take a port instead of a fdes.
use scm_fport_input_waiting_p instead of scm_fdes_waiting_p.
* readline.c (scm_readline): Applied a patch from Greg Harvey to
get readline support working again: use fdopen to get FILE objects.
* gc.c (scm_init_storage): install an atexit proc to flush the
ports.
(cleanup): the new proc. it sets a global variable which can be
checked by the ptob flush procs to avoid trying to throw
exceptions during exit. not very pleasant but it seems more reliable.
* fports.c (local_fflush): check terminating variable and if set
don't throw exception.
* CHECKME: that the atexit proc is installed if unexec used.
* throw.c (scm_handle_by_message): don't flush all ports here.
it still causes bus errors.
* fports.h (SCM_FPORT_CLEAR_BUFFERS): rename to SCM_CLEAR_BUFFERS
and move to ioext.c.
* fports.c (scm_fdes_waiting_p): merged into fport_input_waiting_p.
* ports.c (scm_char_ready_p): check the port buffer and call the
ptob entry if needed.
* ports.h (scm_ptobfuns): input_waiting_p added. change all the
ptob initialisers. use it in char-ready
* ioext.c (scm_do_read_line): moved from ports.c. make it static.
* vports.c (sfflush): modified to write a char (since softports
currently use shortbuf.)
* fports.c (scm_standard_stream_to_port): moved to init.c and
made static.
* init.c (scm_init_standard_ports): make stdout and stderr
unbuffered if connected to a terminal. with stdio they
were line-buffered by default.
* ports.h (scm_ptobfuns): change fflush return to void.
change flush proc definitions.
* strports.c (scm_call_with_output_string): get size from
buffer instead of port stream.
(scm_strprint_obj): likewise.
(st_flush): new proc.
* ports.h (struct scm_port_table): added write_end member,
as an optimisation. set it where write_buf_size is set.
* ports.h (struct scm_port_table): change stream from void *
back to SCM. SCM presumably must be large enough to hold a
pointer (and probably vice versa but who knows.)
(SCM_SSTREAM): deleted. change users back to SCM_STREAM.
(scm_puts): rewritten
* fports.c (local_ffwrite, local_fputs): removed.
* strports.c (stputc, stputs, stwrite): dyked out (FIXME)
* vports.c (sfputc, sfputs, sfwrite) likewise.
* ports.c (write_void_port, puts_void_port): removed.
(putc_void_port, getc_void_port, fgets_void_port): likewise.
* ports.c (scm_lfwrite): rewritten using fport.c version.
* fports.c (local_fputc): deleted.
* ports.c (scm_add_to_port_table): initialise write_needs_seek.
* ports.h (scm_ptobfuns): add seek function pointer.
* fports.c: set it to local_seek, new procedure.
* fports.h (SCM_MAYBE_DRAIN_INPUT): moved to ports.c.
use ptob for seek. take ptob instead of fport arg.
* ports.h (struct scm_port_table): new member write_needs_seek,
replaces reading member in fport struct.
* vports.c (sfgetc): store the getted char into the buffer.
rename to sf_fill_buffer and install it for fill-buffer in ptob.
the Scheme interface is still a procedure that gets a char.
(scm_make_soft_port): set up the port buffer (shortbuf).
* fports.c (local_fgetc, local_fgets): deleted.
* strports.c (stgetc): likewise.
* ports.c: scm_generic_fgets: likewise.
* ports.h (scm_ptobfuns): add fill_buffer.
* ports.c (scm_newptob): assign it.
* strports.c (scm_mkstrport): set up the buffer.
put just the string into the stream, not cons (pos stream).
(stfill_buffer): new proc.
* ports.h: fport buffer moved into port table: to be
used for all port types.
* throw.c (scm_handle_by_message): flush ports at exit.
* socket.c (scm_sock_fd_to_port): use scm_fdes_to_port.
(scm_getsockopt, scm_setsockopt, scm_shutdown, scm_connect,
scm_bind, scm_listen, scm_accept, scm_getsockname,
scm_getpeername, scm_recv, scm_send, scm_recvfrom,
scm_sendto,
use SCM_FPORT_FDES. use SCM_OPFPORTP not SCM_FPORTP.
* posix.c (scm_getgroups): use SCM_ALLOW/DEFER_INTS.
(scm_ttyname): use SCM_FPORT_FDES.
(scm_tcgetpgrp, scm_tcsetpgrp): likewise.
* ioext.c (scm_isatty_p): use SCM_FPORT_FDES.
(scm_fdes_to_ports): modified.
(scm_fdopen): use scm_fdes_to_port.
* ports.c (scm_init_ports): don't try to flush ports using
atexit(). it's too late, errors will cause SEGV.
* fports.c (scm_fport_buffer_add): new procedure.
* fports.h (SCM_FDES_RANDOM_P): new macro. use it in
scm_fdes_to_port and scm_redirect_port.
* ioext.c (scm_redirect_port): use setvbuf to set buffers in the
new port. reset fp->random.
* fports.c (scm_fdes_to_port), ports.c (scm_void_port),
filesys.c (scm_opendir):
restore defer interrupts while the port is constructed.
* (scm_setvbuf): if mode is _IOFBF and size is not supplied,
derive buffer size from fdes or use a default.
(scm_fdes_to_port): use setvbuf instead of creating the buffers
directly.
vports.c (various places): use SCM_SSTREAM.
strports.c: likewise.
* gdbint.c: likewise.
* ports.h (SCM_SSTREAM): new macro.
* fports.c (scm_input_waiting_p): use scm_return_first, since port
may be removed from the stack by the tail call to scm_fdes_waiting_p.
* fports.h (SCM_CLEAR_BUFFERS): new macro.
* ports.c (scm_force_output): call scm_fflush.
* print.c (scm_newline): don't check errno for EPIPE (it wouldn't
* reach this point.) don't flush port (if scm_cur_outp).
* fports.h (SCM_FPORT_FDES): new macro.
* vports.c (sfflush): don't need to set errno.
* ports.c: install scm_flush_all_ports to be run on exit.
ports.c fports.c ioext.c posix.c socket.c net_db.c filesys.c:
removed all uses of SCM_DEFER/ALLOW ints for now. they were mainly
just protecting errno. some may need to be put back.
* scmsigs.c (take_signal): save and restore errno while this
proc runs.
*fports.c (print_pipe_port, local_pclose, scm_pipob): deleted.
* open-pipe, close-pipe are emulated in (ice-9 popen)
ports.c (scm_ports_prehistory): don't init scm_pipob.
ports.h (scm_tc16_pipe): deleted.
posix.c (scm_open_pipe, scm_close_pipe): deleted.
* ioext.c (scm_primitive_move_to_fdes): use fport.
* fport.c (scm_fport_fill_buffer): flush write buffer if needed.
change arg type from scm_fport to SCM port.
fport.h (SCM_SETFDES): removed.
(SCM_MAYBE_DRAIN_INPUT): new macro.
* ioext.c (scm_dup_to_fdes): use SCM_FSTREAM.
(scm_ftell): always use lseek and account for the buffer.
(scm_fileno): use fport buffer.
(scm_fseek): clear fport buffers. always use lseek.
* posix.c (scm_pipe): use fport buffer.
* unif.c: include fports.h instead of genio.h.
* fports.c (scm_fdes_wait_for_input, scm_fport_fill_buffer): new
procedures.
(local_fgetc): use them.
(local_ffwrite): use buffer.
(local_fgets): use buffer.
(scm_setbuf0): deleted.
(scm_setvbuf): set the buffer.
(scm_setfileno): deleted.
(scm_evict_ports): set fdes directly.
* (scm_freopen): deleted. doesn't seem useful in Guile.
(scm_stdio_to_port): deleted.
fports.h (struct scm_fport): add shortbuf member to avoid separate
code for unbuffered ports.
(SCM_FPORTP, SCM_OPFPORTP, SCM_OPINFPORTP, SCM_OPOUTFPORTP): moved
from ports.h.
* genio.c, genio.h: move contents into ports.c, ports.h. The
division wasn't useful.
* fports.c, fports.h (scm_fport_drain_input): new procedure.
* ports.c (scm_drain_input): call scm_fport_drain_input.
* scm_fdes_waiting_p: new procedure.
* fports.c (scm_fdes_to_port): allocate read and/or write buffers.
(scm_input_waiting_p): check the buffer.
(local_fgetc, local_fflush, local_fputc): likewise.
* fports.h (scm_fport): read/write_buf,_pos,_buf_end,,_buf_size:
new members.
* init.c (scm_init_standard_ports): pass fdes instead of FILE *.
* * ports.c (scm_drain_input): new procedure.
ports.h: prototype.
* fports.c (FPORT_READ_SAFE, FPORT_WRITE_SAFE, FPORT_ALL_OKAY,
pre_read, pre_write): removed.
(local_fputc, local_fputs, local_ffwrite): use write, not stdio.
(scm_standard_stream_to_port): change first arg from FILE * to
int fdes.
(local_fflush): flush fdes, not FILE *.
* fports.h (SCM_NOFTELL): removed.
* genio.c, ports.c: don't include filesys.h.
* genio.c (scm_getc): don't use scm_internal_select if FPORT.
do it in fports.c:local_fgetc.
* genio.c: don't use SCM_SYSCALL when calling ptob procedures.
do it where it's needed in the port smobs.
* filesys.c (scm_input_waiting_p): moved to fports.c, stdio
buffer support removed. take SCM arg, not FILE *.
* filesys.h: prototype moved too.
* fports.c (scm_fdes_to_port): new procedure.
(local_fgetc): use read not fgetc.
(local_fclose): use close, not fclose.
(local_fgets): use read, not fgets
* fports.h: prototype for scm_fdes_to_port.
* fports.h (scm_fport): new struct.
* fports.c (scm_open_file): use open, not fopen.
#include fcntl.h
* ports.h (struct scm_port_table): change stream from SCM to void *.
* ports.c (scm_add_to_port_table): check for memory allocation error.
(scm_prinport): remove MSDOS hair.
(scm_void_port): set stream to 0 instead of SCM_BOOL_F.
(scm_close_port): don't throw errors: do it in fports.c.
fports.c; don't just throw them together anywhere.
* fports.c (scm_stdio_to_port): Make NAME a SCM value, which is
what the rest of Guile wants. Don't set the revealed count;
that's only appropriate for stdin, stdout, stderr.
(scm_standard_stream_to_port): This function does set the revealed
count.
* init.c (scm_init_standard_ports): Use scm_standard_stream_to_port,
not scm_stdio_to_port.
* filesys.c (scm_open): Call scm_stdio_to_port; don't write it out.
* fports.c (scm_open_file): Same.
* posix.c (scm_pipe): Same.
* socket.c (scm_sock_fd_to_port): Same.
* ioext.c (scm_fdopen): Same.
(scm_freopen): Moved from here to...
* fports.c (scm_freopen): ... here. This is really something that
munges the internals of an fport, so it should go here.
* fports.h (scm_stdio_to_port): Adjust prototype.
(scm_standard_stream_to_port, scm_freopen): New protoypes.
* ioext.h (scm_freopen): Prototype removed.
* gh_data.c (gh_scm2doubles): Initialize m, to avoid compiler
warnings when it doesn't understand our NORETURN declarations in
error.h.
* posix.c (scm_mknod): Similar.
struct scm_port_table *, not struct scm_port_table.
* posix.c (scm_close_pipe): remove the port from the port table
and mark as closed.
Thanks to Rob Engle for both fixes.
* stime.c (scm_times): new procedure.
* ioext.c (scm_fseek): if the first argument is a file descriptor
call lseek.
(scm_ftell): if the first argument is a file descriptor call lseek
(sic).
* filesys.h: prototypes for scm_open_fdes, scm_fsync.
* filesys.c (scm_chmod): if the first argument is a file descriptor,
call fchmod.
(scm_chown): if the first argument is a port or file descriptor,
call fchown.
(scm_truncate_file): new procedure.
Add DEFER/ALLOW INTS to a few other procedures.
(scm_fsync): new procedure.
(scm_open_fdes): new procedure.
(scm_open): use scm_open_fdes. If mode isn't specified, 666 will
now be used.
(scm_fcntl): the first argument can now be a file descriptor. The
third argument is now optional.
* posix.c (scm_execl, scm_execlp): make the filename argument
compulsory, since omitting it causes SEGV.
(scm_sync): return unspecified instead of #f.
(scm_execle): new procedure.
(environ_list_to_c): new procedure.
(scm_environ): use environ_list_to_c. disable interrupts.
(scm_convert_exec_args): take pos and subr arguments and
improve error checking.
* boot-9.scm: define tms accessors: clock, utime, stime, cutime,
cstime.
* stime.c (tzset): If tzset isn't provided, make it a NOP.
(scm_localtime): Change SCM_EOF to SCM_EOL.
(scm_mktime): Likewise.
* socket.c: Don't include sys/un.h unless autoconf tells
us Unix domain sockets are available.
(scm_fill_sockaddr): Ignore Unix domain code.
(scm_addr_vector): Likewise.
(scm_init_addr_buffer): Likewise.
(scm_socketpair): Don't include unless socketpair was
found during autoconf.
* simpos.c (SYSTNAME): Treat cygwin like Unix.
* scmsigs.c (scm_pause): Don't include unless pause was found
during autoconf.
* posix.c (scm_getgroups): Don't include unless support function
was found during autoconf (in this case, getgroups).
(scm_setpwent): For setpwent.
(scm_setegid): For setegid.
* net_db.c (scm_inet_netof): Don't include unless support
function was found during autoconf (in this case, inet_netof).
(scm_lnaof): For inet_lnaof.
(scm_inet_makeaddr): For inet_makeaddr.
(scm_getnet): For getnetent, getnetbyname, getnetbyaddr.
(scm_getproto): For getprotoent.
(scm_getserv): For getservent.
(scm_sethost): For sethostent, endhostent.
(scm_setnet): For setnetent, endnetent.
(scm_setproto): For setprotoent, endprotoent.
(scm_setserv): For setservent, endservent.
* scmconfig.h.in: Regenerated.
* stime.c (tzset): If tzset isn't provided, make it a NOP.
(scm_localtime): Change SCM_EOF to SCM_EOL.
(scm_mktime): Likewise.
* socket.c: Don't include sys/un.h unless autoconf tells
us Unix domain sockets are available.
(scm_fill_sockaddr): Ignore Unix domain code.
(scm_addr_vector): Likewise.
(scm_init_addr_buffer): Likewise.
(scm_socketpair): Don't include unless socketpair was
found during autoconf.
* simpos.c (SYSTNAME): Treat cygwin like Unix.
* scmsigs.c (scm_pause): Don't include unless pause was found
during autoconf.
* posix.c (scm_getgroups): Don't include unless support function
was found during autoconf (in this case, getgroups).
(scm_setpwent): For setpwent.
(scm_setegid): For setegid.
* net_db.c (scm_inet_netof): Don't include unless support
function was found during autoconf (in this case, inet_netof).
(scm_lnaof): For inet_lnaof.
(scm_inet_makeaddr): For inet_makeaddr.
(scm_getnet): For getnetent, getnetbyname, getnetbyaddr.
(scm_getproto): For getprotoent.
(scm_getserv): For getservent.
(scm_sethost): For sethostent, endhostent.
(scm_setnet): For setnetent, endnetent.
(scm_setproto): For setprotoent, endprotoent.
(scm_setserv): For setservent, endservent.
* _scm.h: if HAVE_RESTARTS is defined then don't use a SYSCALL
loop.
* posix.c (scm_uname): interpret only negative values as an error.
Solaris normally returns a positive value.
* script.c (scm_compile_shell_switches): if we are not going into
an interactive repl, set scm_mask_ints to zero so that asyncs can
run.
* simpos.c (scm_system): don't ignore/unignore signals around
the "system" call.
* posix.c (scm_open_pipe): don't ignore/unignore signals around
the "popen" call.
* init.c (scm_boot_guile_1): don't call scm_init_signals, it's
done in boot-9.scm instead.
* scmsigs.c, async.c: Major rewriting of signal handling code.
(scm_sigaction): new procedure.
(scm_sleep): don't wrap sleep in SCM_SYSCALL, it would mess up the
timing.
(scm_raise): return unspecified, throw error on failure.
* boot-9.scm: signal-handler, alarm-thunk: removed.
don't define ticks-interrupt etc.
top-repl: install signal handlers for SIGINT, SIGFPE, SIGSEGV, SIGBUS
during call to scm-style-repl.
* acconfig.h: mention HAVE_RESTARTS.
* configure.in: check for sigaction and restartable system calls.
Return #f on end-of-file when scanning table (i.e. when called
with no arguments). Try to catch errors, when we can.
* posix.c (scm_getgrgid, scm_getpwuid): Same.
select, since they were not used in this file.
* * filesys.c (scm_select): make the fifth parameter microseconds,
not milliseconds. let the fourth parameter be either a real value
or an integer or #f. The first, second and third arguments can
now be vectors: the type of the corresponding return set will be
the same.
(set_element, get_element): new static procedures.
scm_status_term_sig, scm_status_stop_sig): Modified to work with
Ultrix versions of WIFSTOPPED, etc., which assume that their
arguments are lvalues (hmm).
* Makefile.am (EXTRA_libguile_la_SOURCES): add putenv.c.
* configure.in: move putenv from AC_CHECK_FUNCS to AC_REPLACE_FUNCS.
* putenv.c: new file, from sh-utils 1.12.
* posix.c (scm_environ): use malloc in place of scm_must_malloc
since allocation isn't for Scheme objects.
(scm_putenv): copy strings before placing in the environment.
* stime.c (scm_current_time): throw an error if time returns -1,
instead of returning #f.
(scm_get_internal_real_time, scm_get_internal_real_time): use
scm_long2num for return value instead of SCM_MAKINUM.
* stime.h: prototypes updated.
* stime.c (scm_time_in_msec): apparently unused, deleted.
* configure.in: check for gettimeofday.
* stime.c (scm_time_plus_ticks): new procedure, an scsh interface
which may be more usefully portable than a gettimeofday interface.
* stime.c (filltime): recovered static procedure.
(scm_localtime, scm_gmtime, scm_mktime, scm_tzset): recovered from
an earlier Guile.
* posix.h: add prototype for scm_close_pipe, remove prototypes for
scm_open_input_pipe, scm_open_output_pipe, change scm_mknod prototype.
* * posix.c (scm_mknod): split the mode argument into type and perms
arguments, like the extra fields returned by stat.
* fports.c (scm_pipob): set the close, free and print procedures.
(scm_close_pipe): new procedure.
* posix.c (scm_open_input_pipe, scm_open_output_pipe): deleted,
define them in boot-9.scm
wan't defined. Don't include fd.h.
* Previously fd.h was regenerated whenever configure was run,
forcing a couple of files to be recompiled.
* fd.h.in: deleted, SET_FILE_FD_FIELD moved to ioext.c.
* configure.in: AC_DEFINE FD_SETTER instead of HAVE_FD_SETTER.
Check for _fileno as well as _file.
Don't output fd.h.
* ioext.c: don't fd.h.
* acconfig.h: remove duplicate HAVE_FD_SETTER and change the
other to FD_SETTER.
* Change the stratigy for getting information about errno
(and now signal number) values, e.g., ENOSYS, SIGKILL. Instead of
generating lists of symbols during the build process, which will
not always work, include comprehensive lists in the distribution.
To help keep the lists up to date, the "check_signals" and
"check_errnos" make targets can be used.
* configure.in: don't check for a command to extract errno codes.
* Makefile.am: update file lists, remove errnos.list and errnos.c
targets, add cpp_err_symbols.c, cpp_sig_symbols.c, check_signals,
check_errnos targets.
(CLEANFILES): remove errnos.c and errnos.list, add
cpp_err_symbols_here cpp_err_symbols_diff cpp_err_symbols_new
cpp_sig_symbols_here cpp_sig_symbols_diff cpp_sig_symbols_new
* errnos.default: deleted.
* cpp_signal.c: new file.
* cpp_errno.c: renamed from errnos_get.c.
* cpp_err_symbols, cpp_sig_symbols: new files.
* cpp_cnvt.awk: renamed from errnos_cnvt_awk.
* error.c (scm_init_error): #include cpp_err_symbols instead of
errnos.c.
* posix.c (scm_init_posix): don't intern signal symbols. #include
cpp_sig_symbols.c.
* strop.c (scm_i_index): allow the lower bound to be equal to the
length of the string, so a null string doesn't always give an error.
* posix.h: new prototypes.
* posix.c (scm_status_exit_val, scm_status_term_sig,
scm_status_stop_sig): new functions, as in scsh. They break down
process status values as returned by waitpid.
(scm_freopen): use RO string macros for filename and modes.
(scm_duplicate_port, scm_fdopen): use RO string macros for modes.
* posix.c (scm_getgrgid): simplify conversion of name to C string.
(scm_mknod): use RO string macros for path.
* socket.c (scm_fill_sockaddr, scm_send, scm_sendto):
use SCM_ROSTRINGP, SCM_ROCHARS, SCM_ROLENGTH.
* net_db.c (scm_gethost, scm_getnet, scm_getproto, scm_getserv):
use SCM_ROSTRINGP and SCM_ROCHARS.
unif.c.
strop.h: move prototypes too.
* posix.c (scm_init_posix): don't intern EINTR since it's now done
elsewhere.
* ioext.c (scm_init_ioext): don't intern stat macros, S_IRUSR
etc. I deleted them from filesys.c long ago, but didn't
notice they were here too (although ineffective since
sys/stat.h wasn't included).
* Makefile.am: remove AWK=@AWK@.
Add a rule for generating errnos.list.
(CLEANFILES): put errnos.list here instead of in DISTCLEANFILES.
* configure.in: add AC_SUBST(AWK) and AC_SUBST(ERRNO_EXTRACT).
don't extract errnos, just set a variable (avoids the
need to recompile error.c just because configure is run.)
* unif.h: update prototypes.
* unif.c (scm_uniform_array_read,write): change the offset and
length arguments to start and end, for consistency.
* __scm.h: uncomment SCM_ARG6 and SCM_ARG7, I needed SCM_ARG6.
* ioext.h: update prototypes.
* * ioext.c (scm_read_delimited_x): replaces scm_read_line and
scm_read_line_x, it's a more general procedure using an
interface from scsh. read-line and read-line! are now defined
in boot-9.scm.
* Note that the new read-line trims the terminator
by default, previously it was appended to the returned string. An
optional argument specifies how to process the terminator (scsh
compatible). For the old behaviour: (read-line port 'concat).
scm_read_line, scm_read_line_x: deleted. (read-line port 'split)
returns a pair, but is converted to multiple values if the scsh
module is loaded.
socket.h: update prototypes.
* socket.c (scm_recvfrom): for consistency with other procedures,
take start and end as separate optional arguments.
* (scm_recv, scm_recvfrom): don't allow the second argument
to be a size, only a buffer. Change the scheme names to
recv! and recvfrom!. Don't return the buffer.
* ioext.h, posix.h: move prototypes too.
* ioext.c, posix.c (scm_read_line, scm_read_line_x, scm_write_line:
moved back from posix.c to ioext.c. Also move #includes of "genio.h"
"read.h" and "unif.h".
* ioext.c: include "chars.h"
be #included at all.
* aclocal.m4 (GUILE_HEADER_LIBC_WITH_UNISTD): New autoconf macro.
* configure.in: Call it.
* acconfig.h (LIBC_H_WITH_UNISTD_H): New CPP symbol.
* posix.c, filesys.c: Use its results to decide whether or not to
#include <libc.h>.
* configure, scmconfig.h.in: Rebuilt with autoconf and
autoheader.
is available in a FILE structure, which is needed by char-ready.
* acconfig.h: define FILE_CNT_FIELD, FILE_CNT_GPTR and
FILE_CNT_READPTR.
* simpos.c (scm_getenv): renamed from scm_sys_getenv. Throw
exceptions using misc_error instead of syserror. It seems a bit
odd to throw an exception if a string can't be found in the
environment, but it's consistent with open-file, stat etc.
(simpos.h): remove sys_ from getenv.
* posix.c (scm_putenv): renamed from scm_sys_putenv. If an error
occurs, throw an error instead of returning errno. Return value
is now unspecified.
(numerous in posix.c and posix.h): removed superfluous sys_ from names.
eval.h, feature.c, filesys.c, fports.c, gc.c, gsubr.c, init.c,
ioext.c, kw.c, list.c, load.c, mallocs.c, numbers.c, numbers.h,
pairs.c, pairs.h, ports.c, ports.h, posix.c, procprop.c, procs.c,
procs.h, ramap.c, read.c, root.c, srcprop.c, srcprop.h,
strports.c, symbols.c, tags.h, throw.c, unif.c, variable.c,
vports.c: Cleaned up use of pairs: Don't make any special
assumptions about the internal structure of selectors and
mutators: SCM_CXR (<e1>) = <e2> --> SCM_SETCXR (<e1>, <e2>),
SCM_CXR (<e1>) &= <e2> --> SCM_SETAND_CXR (<e1>, <e2>) etc.
(Among other things, this change makes it easier to build Guile
with certain compilers which have problems with casted lvalues.)
wta for range errors (ASSERT still needs work).
* error.c, error.h (scm_out_of_range): new procedure.
* error.c, error.h (scm_out_of_range_key): new key.
* posix.c (scm_sync): #else was missing.
* error.c, error.h: append _key to names scm_num_overflow and
scm_system_error.
* __scm.h (SCM_SYSMISSING, SCM_NUM_OVERFLOW): use SCM_BOOL_F instead
of consing an empty list.
(SCM_SYSERROR etc.): move into error.c, make them procedures instead
of macros, saves code and string space.
error.c, fports.c, numbers.c, posix.c, ioext.c, filesys.c, socket.c,
fdsocket.c, simpos.c: change names of SCM_SYSERROR etc., to
lower case. Rename scm_syserror_m to scm_syserror_msg.
error.h: prototypes for new procedures.
#define _POSIX_SOURCE before #including it.
* aclocal.m4 (GUILE_STRUCT_UTIMBUF): New test.
* acconfig.h: New comment text for above CPP symbol.
* configure.in: Call it.
* posix.c: #define _POSIX_SOURCE if it seems necessary.
* configure.in (AC_CHECK_HEADERS): Include sys/utime.h and utime.h
in the list.
* posix.c: Check HAVE_SYS_UTIME_H and HAVE_UTIME_H, instead of
testing for __EMX__.
* posix.c: #include <libc.h>, if it exists.
* posix.c: Cast the return result to GETGROUPS_T, not gid_t; we
don't even know if the latter exists.
* posix.c (s_sys_setpgid, s_sys_setsid, s_sys_ctermid,
s_sys_tcgetpgrp, s_sys_tcsetpgrp): Renamed from s_setpgid,
s_setsid, s_ctermid, s_tcgetpgrp, s_tcsetpgrp, for consistency.
* posix.c (R_OK, W_OK, X_OK, F_OK): #define these if the system's
header files don't.
(scm_init_posix): Use them when initializing the Scheme constants
of the same name.
symbols, when defining the scheme values R_OK, W_OK, X_OK, and F_OK.
The symbols aren't available on some systems, and I'm pretty sure
their values are fixed by common widespread practice.
* ioext.c (scm_init_ioext): Code here defined them too; remove it.
* configure.in (AC_CHECK_FUNCS): Add ctermid, setpgid, setsid,
tcgetpgrp, tcsetpgrp, and waitpid to the list of functions to
check for.
* configure, scmconfig.h.in: Updated, using autoconf and autoheader.
* posix.c (scm_sys_ctermid, scm_sys_setpgid, scm_sys_setsid,
scm_sys_tcgetpgrp, scm_sys_tcsetpgrp, scm_sys_waitpid): Put the
bodies of these functions in "#ifdef HAVE_MUMBLE" clauses, with a
stub that signals an error as the #else.
