* libguile/frames.h (struct scm_frame): stack_holder is a void*.
* libguile/frames.c (scm_i_frame_stack_base, scm_i_frame_offset): Expect
stack_holder to be the raw struct scm_vm or scm_vm_cont.
* libguile/continuations.c (scm_i_continuation_to_frame):
* libguile/stacks.c (scm_make_stack)
* libguile/vm.c (vm_dispatch_hook): Adapt creators.
* libguile/frames.h (enum scm_vm_frame_kind, SCM_VM_FRAME_KIND)
(scm_c_make_frame): Add a "frame kind" bit to the first word. This
will allow the "stack holder" to be a non-SCM object.
* libguile/continuations.c (scm_i_continuation_to_frame):
* libguile/frames.c (scm_c_make_frame, scm_frame_previous)
* libguile/stacks.c (scm_make_stack):
* libguile/vm.c (vm_dispatch_hook): Adapt frame creators to set the
frame kind bit.
* libguile/frames.h: Wrap the C interface to VM frames in
BUILDING_LIBGUILE. Change VM frames to record relative offsets into a
stack held by some other object, so that if the stack moves they will
remain valid.
* libguile/frames.c (scm_c_make_frame): Remove offset argument.
(scm_i_frame_offset): Instead, compute the offset from the stack
holder.
(scm_i_frame_stack_base): New helper.
(scm_frame_previous): Adapt.
* libguile/stacks.c (scm_make_stack)
* libguile/vm.c (vm_dispatch_hook):
* libguile/continuations.c (scm_i_continuation_to_frame): Adapt.
* libguile/frames.h (SCM_FRAME_RTL_RETURN_ADDRESS)
(SCM_FRAME_SET_RTL_RETURN_ADDRESS): Remove. The variants without _RTL
now work fine.
(struct scm_vm_frame): Change the return address to be a
scm_t_uint32*.
(struct scm_frame): Change IP to be scm_t_uint32*.
* libguile/frames.c (scm_c_make_frame)
* libguile/control.c (reify_partial_continuation, scm_c_abort)
* libguile/dynstack.c (PROMPT_IP)
(scm_dynstack_push_prompt, scm_dynstack_find_prompt)
* libguile/dynstack.h:
* libguile/vm-engine.c (SYNC_IP, RETURN_ONE_VALUE)
(call, return-values, prompt): Adapt.
* libguile/frames.h: Change so that fp points at local 0 instead of
local 1, and clean up a bit.
(struct scm_vm_frame): Remove program, and rename stack to locals.
(SCM_FRAME_DATA_ADDRESS): Remove; it was redundant with
SCM_FRAME_LOWER_ADDRESS.
(SCM_FRAME_STACK_ADDRESS): Remove; replace with the new
SCM_FRAME_LOCALS_ADDRESS.
(SCM_FRAME_UPPER_ADDRESS): Remove; unused.
(SCM_FRAME_NUM_LOCALS, SCM_FRAME_PREVIOUS_SP): New defines.
(SCM_FRAME_BYTE_CAST, SCM_FRAME_STACK_CAST): Remove; unused;
(SCM_FRAME_LOCAL): New define, replaces SCM_FRAME_VARIABLE.
(SCM_FRAME_PROGRAM): Add cautionary commentary.
* libguile/frames.c: Adapt static asserts.
(scm_frame_num_locals, scm_frame_local_ref, scm_frame_local_set_x):
Adapt. This means that frame-local-ref 0 now returns the procedure.
* libguile/vm-engine.c (ALLOC_FRAME, RESET_FRAME)
(FRAME_LOCALS_COUNT, LOCAL_REF, LOCAL_SET, RETURN_VALUE_LIST): Adapt
to change in fp.
(LOCAL_ADDRESS): New helper.
(POP_CONTINUATION_HOOK): Reimplement, taking the previous FP as an
argument.
(ABORT_CONTINUATION_HOOK): Reimplement, taking no arguments.
(RETURN_ONE_VALUE): Reimplement.
(RETURN_VALUE_LIST): Adapt to FP change.
(halt, return-values, subr-call, foreign-call, prompt)
(continuation-call, compose-continuation, call/cc, abort): Adapt to FP
change, mostly via using LOCAL_ADDRESS, etc abstractions instead of
using the raw frame pointer.
* libguile/control.c (reify_partial_continuation): Update for fp
change.
* libguile/vm.c (vm_reinstate_partial_continuation): Adapt to removal of
SCM_FRAME_UPPER_ADDRESS.
* module/system/vm/frame.scm (frame-call-representation): Adapt to
frame-local-ref change.
* module/system/vm/trace.scm (print-return): Remove unused
frame-num-locals call.
* libguile/_scm.h (SCM_OBJCODE_MINOR_VERSION): Bump for frame layout
change.
* libguile/frames.c: Update some static checks.
(scm_frame_num_locals, scm_frame_local_ref, scm_frame_local_set_x):
Update to not skip over uninitialized frames, as that's not a thing
any more.
* libguile/frames.h: Update to remove MVRA. Woo!
* libguile/vm-engine.c (ALLOC_FRAME, RETURN_ONE_VALUE):
(rtl_vm_engine): Update for 3 words per frame instead of 4.
* libguile/vm.c (vm_return_to_continuation): Likewise.
* module/language/cps/slot-allocation.scm (allocate-slots): 3 words per
frame, not 4.
* module/system/vm/assembler.scm (*bytecode-minor-version*): Bump. Also
remove a couple of tc7's that aren't around any more.
* libguile/Makefile.am:
* libguile/vm-i-loader.c:
* libguile/vm-i-scheme.c:
* libguile/vm-i-system.c: Remove the old VM files, and the rules to
build the .i files.
* libguile/vm-engine.c:
* libguile/vm.c: Remove the old VM. Woot!
* libguile/_scm.h (SCM_OBJCODE_COOKIE, SCM_OBJCODE_ENDIANNESS_OFFSET)
(SCM_OBJCODE_WORD_SIZE_OFFSET): Remove.
* libguile/evalext.c (scm_self_evaluating_p): Remove objcode and program
cases.
* libguile/frames.c (scm_frame_num_locals, scm_frame_previous): Remove
program cases.
* libguile/gc.c (scm_i_tag_name): Remove objcode case.
* libguile/goops.c (scm_class_of, create_standard_classes): Remove
objcode and program cases.
* libguile/instructions.h:
* libguile/instructions.c (scm_instruction_list, scm_instruction_p)
(scm_instruction_length, scm_instruction_pops, scm_instruction_pushes)
(scm_instruction_to_opcode, scm_opcode_to_instruction): Remove old VM
code.
* libguile/objcodes.h:
* libguile/objcodes.c: Remove the objcode data type, and handling for
objcode files.
* libguile/print.c: Remove objcode and program printers.
* libguile/procprop.c: Remove program cases.
* libguile/procs.c:
* libguile/programs.h:
* libguile/programs.c: Remove old program code.
* libguile/smob.c: Remove objcodes include.
* libguile/snarf.h: Remove static program defines.
* libguile/stacks.c: Remove program case.
* libguile/tags.h: Remove program and objcode tc7s.
* module/ice-9/session.scm (procedure-arguments)
* module/language/tree-il/analyze.scm (validate-arity)
* module/statprof.scm (get-call-data, procedure=?)
* module/system/vm/frame.scm (frame-bindings)
(frame-call-representation): Remove old program cases.
* module/system/repl/debug.scm (frame->module): Add a FIXME.
* module/system/vm/instruction.scm: Remove old exports.
* module/system/vm/program.scm: Remove old program code.
* libguile/frames.c (scm_frame_source): Instead of assuming that
scm_frame_procedure is correct, use the IP to get the source.
(scm_frame_instruction_pointer): Return an absolute value instead of
assuming that slot 0 is correct. (It isn't, when preparing for a tail
call.)
* libguile/programs.h:
* libguile/programs.c (scm_find_source_for_addr): New internal helper.
* module/system/repl/debug.scm (print-registers): Readably print
absolute instruction pointers.
* module/system/vm/coverage.scm: Complete rewrite to use absolute IP's.
We can't assume that frame-procedure is cheap if it is correct, or
correct if it is cheap. Anyway using the address is better anyway.
(coverage-data->lcov): Disable per-function info temporarily.
(loaded-modules, module-procedures, closest-source-line)
(closed-over-procedures): Remove these. Instead of going from
procedures to source info, now we go from ELF image to source info.
* module/system/vm/debug.scm (debug-context-length): New interface.
* module/system/vm/program.scm (source-for-addr): New internal helper.
* libguile/frames.c (scm_frame_source, scm_frame_instruction_pointer):
Fix to work with RTL programs.
* module/system/vm/debug.scm (find-debug-context): Allow for the
possibility of there being no ELF image.
(find-program-debug-info, find-program-arities)
(program-minimum-arity, find-program-docstring)
(find-program-properties, find-source-for-addr)
(find-program-die, find-program-sources): Don't bail if we couldn't
get the debug context.
* module/system/vm/frame.scm (frame-next-source)
(frame-call-representation): Allow RTL programs.
* module/system/vm/program.scm (program-arguments-alist): Placeholder
implementation for RTL programs.
(program-arguments-alists): Don't bail if we couldn't get the
arities.
* libguile/vm-engine.c (rtl_vm_engine): Add new VM.
(vm_engine): Add support for calling RTL programs.
* libguile/tags.h (scm_tc7_rtl_program): New type for procedures that
run on the new VM.
* libguile/evalext.c (scm_self_evaluating_p):
* libguile/goops.c (scm_class_of):
* libguile/print.c (iprin1):
* libguile/procprop.c (scm_i_procedure_arity):
* libguile/procs.c (scm_procedure_p): Add hooks for the new tc7.
* libguile/programs.h:
* libguile/programs.c (scm_make_rtl_program, scm_i_rtl_program_print)
(scm_rtl_program_p, scm_rtl_program_code):
* module/system/vm/program.scm: Add constructors and accessors for the
new "RTL programs".
* libguile/vm.c (rtl_boot_continuation): Define a boot program.
(rtl_apply, rtl_values): New static RTL programs.
* libguile/frames.c (scm_frame_num_locals): Adapt for frames of RTL
programs.
* libguile/frames.h: Add description of RTL frames.
* libguile/Makefile.am: Add rules to generate vm-operations.h.
* .gitignore: Ignore vm-operations.h.
* module/system/vm/instruction.scm:
* libguile/instructions.c:
* libguile/instructions.h: Use vm-operations.h to define enumerated
values for the new RTL opcodes. Define some helper macros to pack and
unpack 32-bit instruction words.
(rtl-instruction-list): New function, exported by (system vm
instruction).
* libguile/objcodes.c: Wire up the bits needed to detect the new RTL
bytecode and load it, as appropriate.
* libguile/frames.c (scm_frame_source, scm_frame_previous):
* libguile/stacks.c (scm_make_stack):
* module/ice-9/boot-9.scm (exception-printers):
* module/system/vm/frame.scm (frame-call-representation): Fix more
assumptions that frame-procedure is a program, or even a procedure.
* libguile/frames.c (scm_frame_instruction_pointer):
* module/system/vm/frame.scm (frame-bindings):
(frame-next-source, frame-call-representation): Fix a few locations
that thought that the frame-procedure will always be a VM
procedure. This will not not be the case when traversing the stack of
an application of a non-procedure.
* libguile/vm-i-system.c (call, tail-call, mv-call): Instead of
special-casing structs and smobs at these call sites, just set up the
stack, and jump to a generic apply loop if the proc is not a program.
* libguile/vm-engine.c: The generic apply loop is here. Also, the boot
program is now simply a boot continuation, and can handle any number
of arguments.
* libguile/vm.c (make_boot_program): Update the code that makes the boot
continuation.
* libguile/frames.c: Add compile-time assertions on the layout of
`struct scm_vm_frame'.
(RELOC): Parenthesize and type VAL.
* libguile/frames.h (SCM_FRAME_STRUCT): Write in terms of
`SCM_FRAME_DATA_ADDRESS'.
(SCM_FRAME_DATA_ADDRESS): Parenthesize and type FP.
(SCM_FRAME_SET_DYNAMIC_LINK): Write in terms of
`SCM_FRAME_DYNAMIC_LINK'.
* libguile/vm.c (RELOC): Parenthesize and type SCM_P.
* libguile/ports.c (scm_putc, scm_puts):
* libguile/ports.h (scm_putc_unlocked, scm_puts_unlocked): Separate into
_unlocked and locked variants. Change all callers to use the
_unlocked versions.
* libguile/vm-i-system.c (new-frame): Though it was appealing to set the
dynamic link here on the incomplete frame, we no longer do that, for
the reasons mentioned in the code.
(call, mv-call): Adapt to set the frame's dynamic link.
* libguile/vm-engine.c (vm_engine): Don't set dynamic link here, even
for boot program.
* libguile/frames.c (scm_frame_num_locals, scm_frame_local_ref)
(scm_frame_local_set_x): Fix up not-yet-active frame detection.
* libguile/frames.c (scm_frame_source): Don't call out to (system vm
frames), as this routine is used when printing exceptions. Make
available in the default environment (ugh).
* module/system/vm/frame.scm: Remove frame-source definition and
export.
* libguile/debug.c:
* libguile/eval.c:
* libguile/frames.c:
* libguile/objcodes.c:
* libguile/print.c:
* libguile/programs.c:
* libguile/read.c:
* libguile/struct.c:
* libguile/vm.c: Fix a number of instances in which we assumed we could
fit a pointer into a long.
* libguile/frames.h:
* libguile/frames.c (scm_frame_stack_pointer): New function.
* module/system/repl/debug.scm (print-registers): New function, prints
out registers.
* module/system/repl/command.scm (registers): New debugging
meta-command.
(inspect): Not a stack-command, a normal meta-command.
* libguile/tags.h (scm_tc7_frame, scm_tc7_objcode, scm_tc7_vm)
(scm_tc7_vm_cont): Take more tc7s for VM-related data structures.
* libguile/evalext.c (scm_self_evaluating_p):
* libguile/gc.c (scm_i_tag_name):
* libguile/goops.c (scm_class_of, create_standard_classes):
* libguile/print.c (iprin1): Add cases for the new tc7s.
* libguile/frames.c:
* libguile/frames.h:
* libguile/objcodes.c:
* libguile/objcodes.h:
* libguile/vm.c:
* libguile/vm.h: Desmobify.
* libguile/vm.c (scm_vm_apply): Export to Scheme, because VM objects are
no longer applicable.
* module/system/repl/command.scm (profile):
* module/system/vm/trace.scm (vm-trace):
* module/system/vm/vm.scm (vm-load): Call vm-apply to run a program in a
VM instead of treating the VM as applicable.
* libguile/Makefile.am (modinclude_HEADERS):
* libguile/vm-bootstrap.h: Remove vm-bootstrap.h.
* libguile/frames.c: No more vm-bootstrap.h.
* libguile/instructions.c (scm_init_instructions):
* libguile/objcodes.c (scm_init_objcodes):
* libguile/programs.c (scm_init_programs): No need to call
scm_bootstrap_vm, init.c does that for us.
* libguile/vm.c (scm_bootstrap_vm): No need call e.g.
scm_bootstrap_frames, init.c does that. Remove a twice-calling guard,
should be unnecessary. Don't define the load-compiled subr here.
* libguile/load.c (scm_init_load): Define the load-compiled subr here.
* libguile/vm.h: Declare scm_bootstrap_vm here.
* libguile/init.c (scm_i_init_guile): Properly integrate VM
bootstrapping into this file.
* libguile/frames.c (scm_frame_source): No longer exported to Scheme
via init's call to scm_init_frames; in fact just calls the Scheme
version. Perhaps this function is on its way out, though :)
* libguile/frames.c (scm_init_frames): No need to bootstrap the VM here,
it should be already bootstrapped by init.c.
(scm_bootstrap_frames): No need to register an extension, as
scm_init_frames is called by init.c.
* module/system/vm/frame.scm: Don't load the scm_init_frames extension,
as the primitives from frames.c are loaded by Guile's init.
(frame-bindings): Change to return bindings, as can be accessed by the
binding: accessors from program.scm.
(frame-lookup-binding): Revive and make this one work with current
code.
(frame-binding-set!):
(frame-binding-ref): Use the new frame-lookup-binding. Perhaps these
should handle boxing and unboxing, though.
(frame-source): New accessor, returns a source object.
(frame-call-representation): Change to return a full list, as
truncated-print can truncate for us.
(frame-environment, frame-object-binding, frame-object-name): Update
not to take an address, as the address is part of the frame.
(frame-variable-exists?, frame-variable-ref, frame-variable-set!)
(frame-local-variables, frame-program-name, print-frame)
(print-frame-chain-as-backtrace, frame-file, frame-line-number)
(make-frame-chain, bootstrap-frame?, frame-number, frame-address):
Remove these outdated functions.
* module/system/vm/debug.scm (debugger-repl): Use
frame-call-representation, and ~@y.
(locals): New command, prints local variables in a frame.
* libguile/frames.c, libguile/objcodes.c, libguile/programs.c,
libguile/vm-engine.c, libguile/vm-i-system.c, libguile/vm.c: Use
`SCM_C_OBJCODE_BASE ()' instead of accessing the `base' field of
`struct scm_objcode'.
* libguile/objcodes.h (struct scm_objcode)[base]: Remove.
* libguile/stacks.h: Rework so that a stack doesn't copy information out
of VM frames, it just holds onto a VM frame, along with the stack id
and length. VM frames are now the only representation of frames in
Guile.
(scm_t_info_frame, SCM_FRAME_N_SLOTS, SCM_FRAME_REF, SCM_FRAME_NUMBER)
(SCM_FRAME_FLAGS, SCM_FRAME_SOURCE, SCM_FRAME_PROC, SCM_FRAME_ARGS)
(SCM_FRAME_PREV, SCM_FRAME_NEXT)
(SCM_FRAMEF_VOID, SCM_FRAMEF_REAL, SCM_FRAMEF_PROC)
(SCM_FRAMEF_EVAL_ARGS, SCM_FRAMEF_OVERFLOW)
(SCM_FRAME_VOID_P, SCM_FRAME_REAL_P, SCM_FRAME_PROC_P)
(SCM_FRAME_EVAL_ARGS_P, SCM_FRAME_OVERFLOW_P): Remove these macros
corresponding to the old frame implementation.
(scm_frame_p scm_frame_source, scm_frame_procedure)
(scm_frame_arguments): These definitions are now in frames.h.
(scm_last_stack_frame): Remove declaration of previously-removed
constructor. Probably should re-instate it though.
(scm_frame_number, scm_frame_previous, scm_frame_next)
(scm_frame_real_p, scm_frame_procedure_p, scm_frame_evaluating_args_p)
(scm_frame_overflow_p) : Remove these procedures corresponding to the
old stack implementation.
* libguile/stacks.c: Update for new frames implementation.
* libguile/frames.h:
* libguile/frames.c: Rename functions operating on VM frames to have a
scm_frame prefix, not scm_vm_frame -- because they really are the only
frames we have. Rename corresponding Scheme functions too, from
vm-frame-foo to frame-foo.
* libguile/deprecated.h: Remove scm_stack and scm_info_frame data types.
* libguile/vm.c (vm_dispatch_hook): Adapt to scm_c_make_frame name
change.
* module/system/vm/frame.scm: No need to export functions provided
frames.c now, as we load those procedures into the default environment
now. Rename functions, and remove a couple of outdated, unused
functions. The bottom half of this file is still bitrotten, though.
* libguile/backtrace.c: Rework to operate on the new frame
representation. Also fix a bug displaying file names for compiled
procedures.
* libguile/init.c: Load the VM much earlier, just because we can. Also
it allows us to have frames.[ch] loaded in time for stacks to be
initialized, so that scm_frame_arguments can do the right thing.
* libguile/frames.c, libguile/instructions.c, libguile/objcodes.c,
libguile/programs.c, libguile/throw.c, libguile/vm-i-scheme.c,
libguile/vm.c: Replace uses of discouraged constructs by their
current counterparts.
* libguile/objcodes.h: Bump for metadata format change.
* libguile/frames.h: Rework so we don't frob the program's nargs, nlocs,
etc at runtime. Instead we don't really know what's a local var, an
argument, or an intermediate value. It's a little unfortunate, but
this will allow for case-lambda, and eventually for good polymorphic
generic dispatch; and the nlocs etc can be heuristically
reconstructed. Such a reconstruction would be better done at the
Scheme level, though.
(SCM_FRAME_STACK_ADDRESS): New macro, the pointer to the base of the
stack elements (not counting the program).
(SCM_FRAME_UPPER_ADDRESS): Repurpose to be the address of the last
element in the bookkeeping part of the stack -- i.e. to point to the
return address.
* libguile/vm-engine.h:
* libguile/vm-i-system.c: Adapt to removal of stack_base. Though we
still detect stack-smashing underflow, we don't do so as precisely as
we did before, because now we only detect overwriting of the frame
metadata.
* libguile/vm-engine.c (vm_engine): Remove the stack_base variable. It
is unnecessary, and difficult to keep track of in the face of
case-lambda. Also fix miscommented "ra" and "mvra" pushes. Push the
vp->ip as the first ra...
* libguile/vm-i-system.c (halt): ...because here we can restore the
vp->ip instead of setting ip to 0. Allows us to introspect ips all
down the stack, including in recursive VM invocations.
* libguile/frames.h:
* libguile/frames.c (scm_vm_frame_stack): Removed, because it's getting
more difficult to tell what's an argument and what's a temporary stack
element.
(scm_vm_frame_num_locals): New accessor.
(scm_vm_frame_instruction_pointer): New accessor.
(scm_vm_frame_arguments): Defer to an implementation in Scheme.
(scm_vm_frame_num_locals scm_vm_frame_local_ref)
(scm_vm_frame_local_set_x): Since we can get not-yet-active frames on
the stack now, with our current calling convention, we have to add a
heuristic here to jump over those frames -- because frames have
pointers in them, not Scheme values.
* libguile/programs.h:
* libguile/programs.c (scm_program_arity): Remove, in favor of..
(scm_program_arities): ...this, which a list of arities, in a new
format, occupying a slot in the metadata.
* module/language/assembly/decompile-bytecode.scm (decode-load-program):
Fix mv-call decompilation.
* module/system/vm/frame.scm (vm-frame-bindings, vm-frame-binding-ref)
(vm-frame-binding-set!): New functions, to access bindings by name in
a frame.
(vm-frame-arguments): Function now implemented in Scheme. Commented
fairly extensively.
* module/system/vm/program.scm (program-bindings-by-index)
(program-bindings-for-ip): New accessors, parsing the program bindings
metadata into something more useful.
(program-arities, program-arguments): In a case-lambda world, we have
to assume that programs can have multiple arities. But it's tough to
detect this algorithmically; instead we're going to require that the
program metadata include information about the arities, and the parts
of the program that that metadata applies to.
(program-lambda-list): New accessor.
(write-program): Show multiple arities.
* module/language/glil/compile-assembly.scm (glil->assembly): Add
"arities" to the state of the compiler, and add arities entries as
appropriate.
* libguile/tags.h (scm_tc7_program):
* libguile/programs.h: Programs now have their own tc7 code. Fix up the
macros appropriately.
* libguile/programs.c: Remove smobby bits, leaving marking, printing,
and application for other parts of Guile.
* libguile/debug.c (scm_procedure_source):
* libguile/eval.c (scm_trampoline_0, scm_trampoline_1)
(scm_trampoline_2): Add cases for tc7_program.
* libguile/eval.i.c (CEVAL, SCM_APPLY):
* libguile/evalext.c (scm_self_evaluating_p):
* libguile/gc-card.c (scm_i_sweep_card, scm_i_tag_name):
* libguile/gc-mark.c (1):
* libguile/print.c (iprin1):
* libguile/procs.c (scm_procedure_p, scm_thunk_p)
* libguile/vm-i-system.c (make-closure): Adapt to new procedure
representation.
* libguile/procprop.c (scm_i_procedure_arity): Do the right thing for
programs.
* test-suite/tests/procprop.test ("procedure-arity"): Arity test now
succeeds.
* libguile/goops.c (scm_class_of): Programs now belong to the class
<procedure>, not a smob class.
* libguile/vm.h (struct vm, struct vm_cont):
* libguile/vm-engine.c (vm_engine):
* libguile/frames.h (SCM_FRAME_BYTE_CAST, struct vm_frame):
* libguile/frames.c (scm_c_make_vm_frame): Fix usages of scm_byte_t,
changing them to scm_t_uint8.
* libguile/frames.h: Reorder the frame layout so the return address
comes below the arguments.working
(SCM_FRAME_SET_RETURN_ADDRESS, SCM_FRAME_SET_MV_RETURN_ADDRESS): New
macros.
* libguile/frames.c (scm_vm_frame_arguments): Use the macros to access
the arguments.
* libguile/vm-engine.c (vm_engine): Fix for new calling convention.
* libguile/vm-engine.h (INIT_FRAME): New macro. Does part of what
NEW_FRAME used to do.
* libguile/vm-i-system.c (call, mv-call): Shuffle args up to make room
for the stack, and adapt to new calling convention.
(goto/args): Shuffling down is easier now.
(return, return/args): Adapt to new frame layout.
* libguile/vm.c (vm_mark_stack): Adapt to new frame layout, and the
possibility of there being crap on the stack.
(really_make_boot_program): Remove extraneous comment.
* libguile/frames.c (scm_frame_external_link): Removed.
* libguile/frames.h: No need to have the "external link" in the stack
frame -- update macros to take the new situation into account.
* libguile/objcodes.h (struct scm_objcode): Rename the nexts field to
"unused". In the future we can use it for nlocs, I think.
(SCM_OBJCODE_NEXTS): removed.
* libguile/programs.h:
* libguile/programs.c (scm_make_program): Expect the third argument to
be a vector of free variables, not a list of free variables.
SCM_BOOL_F indicates no free variables, not SCM_EOL.
(program_mark): Adapt.
(scm_program_arity): No more nexts.
(scm_program_free_vars): Replaces scm_program_externals.
* libguile/vm-engine.c (VM_CHECK_EXTERNAL)
(vm_engine): No need for the "external" var.
* libguile/vm-engine.h (CACHE_PROGRAM): Update for SCM_PROGRAM_FREE_VARS
instead of SCM_PROGRAM_EXTERNALS.
(NEW_FRAME): Update for new frame size, and no need to cons up
externals. Yay :)
* libguile/vm-i-loader.c (load-program): Update for scm_make_program.
* libguile/vm-i-system.c (external-ref, external-set): No more.
(make-closure): No more.
(goto/args): No need to re-cons externals here. Update for new stack
frame size.
(mv-call, return, return/values): Update for new frame size. No need
to reinstate externals on return.
* libguile/vm.c (really_make_boot_program, scm_load_compiled_with_vm):
Update for scm_make_program.
* module/language/objcode/spec.scm (objcode-env-externals): Treat '() as
#f, for the externals. Need to clean this up later...
* module/system/vm/program.scm (arity:nexts): Remove. Rename
program-external to program-free-vars.
* libguile/frames.c:
* libguile/frames.h:
* libguile/instructions.c:
* libguile/instructions.h:
* libguile/objcodes.c:
* libguile/objcodes.h:
* libguile/programs.c:
* libguile/programs.h:
* libguile/vm-bootstrap.h:
* libguile/vm-engine.c:
* libguile/vm-engine.h:
* libguile/vm-expand.h:
* libguile/vm-i-scheme.c:
* libguile/vm.c:
* libguile/vm.h: Update to use SCM_API and SCM_INTERNAL correctly. Adjust
copyright to be the same as the copyright of Guile itself, which should
be fine given that the FSF holds the whole thing.
Reported by Daniel Kraft <d@domob.eu>.
* libguile/frames.c, libguile/vm.c: Include <stdlib.h>, use `size_t'
instead of `scm_sizet'.
* libguile/objcodes.c, libguile/programs.c, libguile/vm-engine.c,
libguile/vm-i-loader.c, libguile/vm-i-system.c: Use `scm_list_X ()'
instead of the deprecated `SCM_LISTX ()'.
* libguile/extensions.h: Define a scm_t_extension_init_func.
* libguile/frames.c:
* libguile/instructions.c:
* libguile/objcodes.c:
* libguile/programs.c:
* libguile/vm.c: Register extension init funcs. Should play nicer with a
static Guile, in addition to working on Darwin with non-default
installation prefixes without munging DYLD_LIBRARY_PATH.
* module/system/vm/frame.scm:
* module/system/vm/instruction.scm:
* module/system/vm/objcode.scm:
* module/system/vm/program.scm:
* module/system/vm/vm.scm: Use load-extension.
* guile-tools.in: Fix the checks to account for non-srcdir builds.
* libguile/frames.c:
* libguile/objcodes.c:
* libguile/programs.c:
* libguile/instructions.c:
* libguile/vm.c: Fix snarf-includes to cope with non-srcdir builds.
* libguile/instructions.h:
* libguile/instructions.c: Fix the stubs inclusion to be non-srcdir
compatible.
* libguile/vm-expand.h (VM_DEFINE_INSTRUCTION): Fix some things so as not
to require the instructions.h defintitions, since we have the codes
already. Not important tho :)
* pre-inst-guile-env.in: Minor tweak that should have no effect.
* test-suite/standalone/Makefile.am (all-local): Remove a chmod +x step,
the configure.ac rule should do that if necessary.
* libguile/frames.c (vm_frame_print): Add a frame printer.
* libguile/stacks.c (stack_depth, read_frames): Only switch the VM stack
for boot program dframes.
* libguile/vm-engine.c (VM_NAME): Push one debug frame per invocation,
unconditionally. (If we push them at all, of course.)
