* gdbinit (pp, inst): New commands.
* libguile/vm-engine.c (vm_error_not_a_pair): New error case.
* libguile/vm-i-scheme.c (VM_VALIDATE_CONS): New macro -- use this
instead of SCM_VALIDATE_* because SCM_VALIDATE will exit nonlocally
before we have a chance to sync the regs.
(car, cdr, set-car, set-cdr): Use VM_VALIDATE_CONS.
* libguile/vm-i-system.c (goto/args): Bugfix: when doing a
self-tail-recursion, allocate fresh externals. Fixes use of match.go.
* module/system/vm/assemble.scm (dump-object!): Add some checks that we
aren't dumping out values that the VM can't handle.
* module/system/vm/disasm.scm (disassemble-externals): Fix rotten call to
`print-info'.
* oop/goops/dispatch.scm: Add a FIXME.
* testsuite/Makefile.am (vm_test_files):
* testsuite/t-closure4.scm (extract-symbols): New test, distilled with
much effort out of match.scm.
* ice-9/Makefile.am (NOCOMP_SOURCES): Re-enable compilation of match.scm.
Yay!
I saw this problem when running elisp.test -- it tries to apply a
function to an arglist ending in nil, which obviously is not null.
* libguile/vm-engine.h (PUSH_LIST): New helper macro, pushes the elements
of a list onto the stack. Checks to make sure that the list is proper.
* libguile/vm-i-system.c (list-break, mv-call, apply, goto/apply)
(goto/cc): Use LIST_BREAK.
* libguile/vm-engine.c (vm_error_improper_list): New error case.
* libguile/vm-i-system.c (goto/args): Sync the registers before doing the
SCM_TICK. We probably need a different SCM_TICK that saves the regs
only if necessary. This fixes GC problems with a compiled popen.scm.
* ice-9/Makefile.am: Re-enable popen.scm compilation.
* libguile/vm-i-system.c (call/cc, goto/cc): Don't assert that ip matches
vp->ip, because vp->ip is not restored by vm_reset_stack, and indeed
it's re-set to 0 by `halt'. But still, perhaps reset_stack and halt
should indeed reset vp->ip.
* libguile/vm-i-system.c (goto/cc): Add some asserts here.
* libguile/vm.c (capture_vm_cont): Add some asserts here too.
(reinstate_vm_cont): Null the correct number of bytes. Add a FIXME.
(vm_reset_stack): Make the code a bit clearer. Null the correct number
of bytes.
* libguile/vm-engine.h (NULLSTACK_FOR_NONLOCAL_EXIT): New macro, handles
a very tricky case that took me days to find! Amply commented. Expands
to nothing in the normal case.
* libguile/vm-i-system.c (call, goto/args, mv-call): Call
NULLSTACK_FOR_NONLOCAL_EXIT in the right places. Fixes
continuations.test.
* libguile/vm-engine.h (CHECK_STACK_LEAK, NULLSTACK): Add a new mode,
VM_ENABLE_STACK_NULLING, that tries to ensure that all stack data past
the top of the stack is NULL. This helps to verify the VM's
consistency. If VM_ENABLE_STACK_NULLING is not defined, there is no
overhead.
(DROP, DROPN): Hook into NULLSTACK.
(POP_LIST): Hoo, fix a good bug: if CONS triggered a GC, the elements
of the list that had not yet been consed would not be marked, because
the sp was already below them.
(NEXT): Hook into CHECK_STACK_LEAK.
(INIT_ARGS): Add a note that consing the rest arg can cause GC.
(NEW_FRAME): Cons up the external data after initializing the frame, so
that if GC is triggered, the precise marker sees a well-formed frame.
* libguile/vm-i-loader.c (load-program): In the four-integers case, use
the POP macro so that we can hook into NULLSTACK (if necessary).
* libguile/vm-i-scheme.c (ARGS2, ARGS3): Hook into NULLSTACK.
* libguile/vm-i-system.c (halt): Null the nvalues. Rework some asserts
into using ASSERT, and null the stack when we free the frame.
(variable-set): Use DROPN instead of sp -= 2.
(BR): Hook into NULLSTACK.
(goto/args): Hook into NULLSTACK. In the non-self case, delay updating
the frame until after INIT_ARGS so that GC sees a well-formed frame.
Delay consing the externals until after the frame is set up, as in
NEW_FRAME.
(call/cc): Add some asserts.
(return): Rework some asserts into ASSERT, and hook into NULLSTACK.
(return/values): Hook into NULLSTACK, and use ASSERT.
(return/values*) Use ASSERT.
* libguile/vm.c (VM_ENABLE_ASSERTIONS, VM_ENABLE_STACK_NULLING): These
are the variables that control assertions and nulling. Perhaps we can
do these per-engine when we start compiling the debug engine separate
from a speedy engine.
(vm_mark_stack): Add a precise stack marker. Yay!
(vm_cont_mark): Mark the continuation stack precisely.
(capture_vm_cont): Record the difference from the vp's stack_base too,
so that we can translate the dynamic links when marking the
continuation stack. Memset the stack to NULL if we are doing nulling.
(reinstate_vm_cont): If we are nulling, null out the relevant part
of the stack.
(vm_reset_stack): When resetting sp due to a nonlocal exit, null out
the stack too.
(vm_mark): If we are nulling, assert that there are no extra values on
the stack. Mark the stack precisely.
* libguile/vm-engine.c: Call scm_wrong_num_args in the wrong-num-args
case, to be more like the interpreter.
* libguile/vm-engine.h (ASSERT): New macro.
* libguile/vm-i-system.c (apply, goto/apply): Assert that nargs >= 2,
because the compiler should always feed us correct instructions.
(call/cc): If no values are returned to the continuation, signal
no_values instead of wrong_num_args.
* libguile/vm-engine.h (POP_CONS_MARK): New macro, analagous to
POP_LIST_MARK; used in quasiquote on improper lists.
* libguile/vm-i-system.c (cons-mark): New instruction. You know the
drill, remove all your .go files please.
* module/system/il/compile.scm (codegen): Compile quasiquoted improper
lists with splices correctly. Additionally check that we don't have
slices in the CDR of an improper list.
* testsuite/t-quasiquote.scm: Add a test for unquote-splicing in improper
lists.
* gdbinit: Update to be a bit more useful.
* libguile/vm-i-system.c: Make sure that arguments to C procedures are
visible on the stack so they get marked. Could be a source for the
missed references.
* libguile/vm-engine.c (vm_run): Add new error case for resolving @ or @@
references, but there is no such module. Possible if
module-public-interface returns #f.
* libguile/vm-i-loader.c (link-now): Allow the stack arg to be a sym, as
before, or a list, indicating an absolute reference. Could be two
separate instructions, but I'm lazy.
* libguile/vm-i-system.c (late-variable-ref, late-variable-set): As in
link-now, allow the lazy reference to be a list, for @ and @@.
* module/language/scheme/translate.scm (custom-transformer-table):
Compile @ and @@, and set! forms for both of them. This will ease the
non-hygienic pain for exported macros.
* module/system/il/compile.scm (make-glil-var): Translate public and
private module variable references into glil-module variables.
* module/system/il/ghil.scm (ghil-var-at-module!): New function, resolves
a variable for @ or @@.
* module/system/il/glil.scm (<glil-module>): Revival of <glil-module>,
this time with the semantics that it really links to a particular
module.
* module/system/vm/assemble.scm (<vlink-now>, <vlink-later>): Redefine as
taking a "key" as the argument, which may be a sym or a list; see the
notes on link-now for more details.
(codegen): Compile <glil-module> appropriately. Some duplication here,
probably could use some cleanup later.
* libguile/programs.c (scm_c_make_closure): If the program is actually
not a program, abort. This can happen if GC misses a reference, as
currently seems to happen.
* libguile/vm.c (vm_mark): Revert part of
7ff017002d, which changed the call to
scm_mark_locations. I'm 99% *sure* this is wrong, but it seems to
prevent missed references when recompiling the .go files in guile
itself. Needs revisiting soon, but for the time being we can go back to
where we were a couple of days ago.
* libguile/vm-i-system.c (halt, vector, vector-mark): Sync the registers
before calling into C, as it may GC.
* libguile/vm-i-system.c (call, goto/args): Add a FIXME for handling the
case in which a call to the interpreter returns a values object.
(call/cc, goto/cc): Flesh out, and handle full continuations (with the
C stack also).
* module/language/scheme/translate.scm (custom-transformer-table):
Compile call-with-current-continuation. This is necessary so that the
called procedure is called in tail position.
* module/system/il/compile.scm (codegen): Translate apply to goto/apply,
call/cc to goto/cc, etc when in tail position.
* libguile/vm-engine.c (vm_run): Add new error case,
vm_error_not_enough_values.
* libguile/vm-i-system.c (goto/nargs, call/nargs): So, in these cases, if
we get too many values, we don't truncate the values like we do in the
single-value continuation case, or in the mvbind case. What to do? I
guess we either truncate them here, or only allow the correct number of
values. Dunno. Mark the code as a fixme.
(truncate-values): New instruction, for mv-bind: checks that the number
of values on the stack is compatible with the number of bindings we
have arranged for them, truncating if necessary.
* module/language/scheme/translate.scm (custom-transformer-table):
Compile receive as a primary form -- not so much because it is a
primary form, but more to test the mv-bind machinery. Also it's more
efficient, I think.
* module/system/il/compile.scm (lift-variables!): New helper, factored
out of `optimize'.
(optimize): Add a few more cases. Adapt `lambda' optimization, which
isn't much. I'm not happy with ghil as a mungeable language.
Add a case for call-with-values with the second argument is
a lambda: lift the lambda. Untested.
(codegen): Refactor the push-bindings! code. Compile mv-bind.
* module/system/il/ghil.scm (<ghil-mv-bind>): Add mv-bind construct,
along with its procedures.
* module/system/il/glil.scm (<glil-mv-bind>): Add mv-bind construct,
different from the high-level one. It makes sense in the source, I
think.
* module/system/vm/assemble.scm (codegen): Assemble glil-mv-bind by
pushing onto the bindings list, and actually push some code to truncate
the values.
* libguile/vm-engine.c (vm_run): Add another byte onto the bootstrap
program, as the offset passed to mv-call now takes two bytes.
* module/system/vm/frame.scm (bootstrap-frame?): Update for the new
bootstrap length. Really we should just check for 'halt though.
* libguile/vm-i-system.c (FETCH_OFFSET): New helper, used in BR().
(goto/nargs, call/nargs): Versions of goto/args and call, respectively,
that take the number of arguments from a value on the top of the stack.
(mv-call): Call FETCH_OFFSET to get the offset.
* module/language/scheme/translate.scm (custom-transformer-table):
Compile call-with-values to <ghil-mv-call>. There is some trickery
because of the r4rs.scm call-with-values trampolines.
* module/system/il/ghil.scm: Add <ghil-mv-call> and accessors.
* module/system/il/compile.scm (codegen): Compile <ghil-mv-call>.
* module/system/il/glil.scm: Add <glil-mv-call>, which needs some special
assembly because of the label. Fix some typos.
* module/system/vm/assemble.scm (byte-length): New helper, factored out
and made more general.
(codegen): Assemble mv-call, including the label.
(check-length): New helper, makes sure that the addressing is
consistent within the produced object code.
(stack->bytes): Rewrite to be more generic -- now `br' instructions
aren't the only ones jumping around in the instruction stream.
* module/system/vm/conv.scm (make-byte-decoder): Return two values in the
#f case.
* module/system/vm/disasm.scm (disassemble-bytecode): Rewrite, because
the previous implementation depended on a guile interpreter quirk:
namely, that multiple values could be represented within one value, and
destructured later.
* libguile/vm-engine.c (vm_run): Move nvalues to the top level, to avoid
(spurious, it seems) gcc warnings about it being used uninitialized.
* libguile/vm-i-system.c (halt, return/values): Adapt to gcc silliness.
Deindent some of return/values.
(return/values*): New instruction, does what (apply values . args)
would do.
* module/language/scheme/translate.scm (custom-transformer-table): Move
the apply and @apply cases here from inline.scm, because we need some
more cleverness when dealing with cases like (apply values . args).
(lookup-apply-transformer): Define an eval transformer for `values',
turning it into ghil-values*.
* module/system/il/compile.scm (codegen): Compile <ghil-values*> into
return/values*.
* module/system/il/ghil.scm: Add <ghil-values*> and accessors.
(ghil-lookup): Add optional argument, define?, which if false tells us
not to actually cache the binding if it is not found in the toplevel.
* module/system/il/inline.scm: Remove apply clauses.
* module/system/vm/frame.scm (bootstrap-frame?): Update heuristic for
bootstrap-frame?, as the bootstrap frame is now 5 bytes since it
accepts multiple values.
* libguile/vm-engine.c (vm_run): The bootstrap program now uses mv_call,
so as to allow multiple values out of the VM. (It did before, because
multiple values were represented internally as single scm_values
objects, but now that values go on the stack, we need to note the boot
frame as accepting multiple values.)
(vm_error_no_values): New error, happens if you pass no values into a
single-value continuation. Passing more than one is OK though, it just
takes the first one.
* libguile/vm-i-system.c (halt): Assume that someone has pushed the
number of values onto the stack, and package up that number of values
as a scm_values() object, for communication with the interpreter.
(mv-call): New instruction, calls a procedure with a multiple-value
continuation, even handling calls out to the interpreter.
(return/values): New instruction, returns multiple values to the
continuation. If the continuation is single-valued, takes the first
value or errors if there are no values. Otherwise it returns to the
multiple-value return address, pushing the number of values on top of
the values.
* module/system/il/compile.scm (codegen): Compile <ghil-values> forms.
* module/system/il/ghil.scm (<ghil-values>) Add new GHIL data structure
and associated procedures.
* module/language/scheme/translate.scm (custom-transformer-table):
Compile (values .. ) forms into <ghil-values>.
* libguile/vm-i-system.c (call): Rename continuation invocation from
`vm_call_cc' to `vm_call_continuation', because that's what it really
does. Add a note that it doesn't handle multiple values at the moment.
(goto/arg): Renamed from tail-call, in deference to the progenitors, on
Dale Smith's suggestion.
(goto/apply): New instruction, for `apply' in a tail context. Not yet
used, or vetted for that matter.
(call/cc): No need to pop the program, I don't think; although this
isn't tested either.
(goto/cc): New instruction, for call/cc in a tail context.
* module/language/scheme/translate.scm (*forbidden-primitives*): Rename
from %forbidden-primitives.
* module/system/il/compile.scm (codegen): Adapt to goto/args instead of
tail-call.
* module/system/il/inline.scm: Start inlining some macros used in
r4rs.scm -- not yet fully tested.
* ice-9/boot-9.scm: Allow load of a compiled r4rs file.
* libguile/frames.c (frame-mv-return-address): New accessor.
* libguile/frames.h: Update frame diagram.
(SCM_FRAME_UPPER_ADDRESS): Update for data area
growing by one pointer.
(SCM_FRAME_MV_RETURN_ADDRESS): New macro.
* libguile/vm-engine.h (NEW_FRAME): Update for frame getting bigger by a
pointer. In a normal NEW_FRAME, set the MV return address to NULL, to
indicate that this continuation does not accept multiple values.
* libguile/vm-i-system.c (tail-call): Update frame replacement code to
understand the MV return address.
(return): Make room for the MVRA.
* libguile/programs.c (program_print): Only try to lookup write-program
if the module system is booted.
* libguile/vm-engine.h (FREE_FRAME): Remove, it's now inlined everywhere.
* libguile/vm-i-system.c (tail-call): Inline FREE_FRAME, and implement
the calling bits here. Will make things more hackable.
* libguile/programs.h (struct scm_program):
* libguile/programs.c (scm_c_make_program): Record the current module
when making a program. This replaces the per-late binding recorded
module in the generated code, which should be more efficient, both in
terms of garbage, and in not calling resolve-module.
(program-module): New accessor.
* module/system/vm/program.scm: Add program-module to exports.
* libguile/vm-i-loader.c (link-later): Remove this instruction, since now
the entry in the object table is just a symbol, and can be loaded with
load-symbol.
* libguile/vm-i-system.c (late-variable-ref, late-variable-set): Rework
so as to look up in the module of the current program. The logic could
be condensed quite a bit if scm_module_lookup () knew what to do with
mod==#f.
* module/system/vm/assemble.scm (dump-object!): Dump <vlink-later> just
as load-symbol, as mentioned in the note on link-later.
* module/system/il/ghil.scm: Update comment to reflect the new reality.
* libguile/vm-i-system.c (late-variable-ref, late-variable-set): If the
module system isn't booted, do a simple scm_lookup. In the -ref case,
actually cache the variable location (doh!).
* ice-9/boot-9.scm: Only define load-compiled as #f if it's not already
defined, which won't normally be the case.
* libguile/guile-vm.c: Removed, there's no more guile-vm binary.
* libguile/frames.c: (with change frame? -> heap-frame?)
* libguile/frames.h:
* libguile/instructions.c:
* libguile/instructions.h:
* libguile/objcodes.c:
* libguile/objcodes.h:
* libguile/programs.c:
* libguile/programs.h:
* libguile/vm-bootstrap.h: (was bootstrap.h)
* libguile/vm-engine.c: (was vm_engine.c)
* libguile/vm-engine.h: (was vm_engine.h)
* libguile/vm-expand.h: (was vm_expand.h)
* libguile/vm-i-loader.c: (was vm_loader.c)
* libguile/vm-i-scheme.c: (was vm_scheme.c)
* libguile/vm-i-system.c: (was vm_system.c)
* libguile/vm.c:
* libguile/vm.h: These files moved here from src/, as guile-vm is now a
part of libguile.
* libguile/init.c: Bootstrap the VM. Yay!
* libguile/Makefile.am: The necessary chicanery here.
* module/system/vm/Makefile.am:
* module/system/vm/bootstrap.scm:
* module/system/vm/frame.scm:
* module/system/vm/instruction.scm:
* module/system/vm/objcode.scm:
* module/system/vm/program.scm:
* module/system/vm/vm.scm:
* pre-inst-guile-env.in: Add builddirs to the load path; add module/ to
the path in the empty-$GUILE_LOAD_PATH case as well.
* src/Makefile.am: Moved out everything except guilec and guile-disasm,
which probably should be moved to the scripts directory?
* testsuite/Makefile.am: Update to find guile-vm in the right place.
* module/system/vm/Makefile.am:
* module/system/vm/bootstrap.scm: Removed bootstrap.scm, scm_init_guile
handles the bootstrapping for us.
* module/system/vm/frame.scm:
* module/system/vm/instruction.scm:
* module/system/vm/objcode.scm:
* module/system/vm/program.scm:
* module/system/vm/vm.scm: Call the init functions in libguile; should
fix at some point to avoid the dlopen?
