* configure.in: add --disable-arrays option, probably temporary.
* the following changes allow guile to be built with the array
"module" omitted. some of this stuff is just tc7 type support,
which wouldn't be needed if uniform array types were converted
to smobs.
* tag.c (scm_utag_bvect ... scm_utag_cvect): don't define unless
HAVE_ARRAYS.
(scm_tag): don't check array types unless HAVE_ARRAYS.
* sort.c (scm_restricted_vector_sort_x, scm_sorted_p):
remove the unused array types.
* (scm_stable_sort, scm_sort): don't support vectors if not
HAVE_ARRAYS. a bit excessive.
* random.c (vector_scale, vector_sum_squares,
scm_random_solid_sphere_x, scm_random_hollow_sphere_x,
scm_random_normal_vector_x): don't define unless HAVE_ARRAYS.
* gh_data.c (makvect, gh_chars2byvect, gh_shorts2svect,
gh_longs2ivect, gh_ulongs2uvect, gh_floats2fvect, gh_doubles2dvect,
gh_uniform_vector_length, gh_uniform_vector_ref):
don't define unless HAVE_ARRAYS.
(gh_scm2chars, gh_scm2shorts, gh_scm2longs, gh_scm2floats,
gh_scm2doubles):
don't check vector types if not HAVE_ARRAYS.
* eq.c (scm_equal_p), eval.c (SCM_CEVAL), print.c (scm_iprin1),
gc.c (scm_gc_mark, scm_gc_sweep), objects.c (scm_class_of):
don't support the array types unless HAVE_ARRAYS is defined.
* tags.h: make nine tc7 types conditional on HAVE_ARRAYS.
* read.c (scm_lreadr): don't check for #* unless HAVE_ARRAYS is
defined (this should use read-hash-extend).
* ramap.c, unif.c: don't check whether ARRAYS is defined.
* vectors.c (scm_vector_set_length_x): moved here from unif.c. call
scm_uniform_element_size if HAVE_ARRAYS.
vectors.h: prototype too.
* unif.c (scm_uniform_element_size): new procedure.
* init.c (scm_boot_guile_1): don't call scm_init_ramap or
scm_init_unif unless HAVE_ARRAYS is defined.
* __scm.h: don't define ARRAYS.
* Makefile.am (EXTRA_libguile_la_SOURCES): unif.c and ramap.c
moved here from libguile_la_SOURCES.
* Makefile.am (ice9_sources): add arrays.scm.
* boot-9.scm: load arrays.scm if 'array is provided.
* arrays.scm: new file with stuff from boot-9.scm.
* socket.c (scm_htons, scm_ntohs, scm_htonl, scm_ntohl): new
functions for network data conversion.
* numbers.c (scm_num2long, scm_num2longlong):
throw out-of-range instead of wrong-type-arg if appropriate.
(scm_iint2str): handle -2^31 correctly.
(scm_num2long): handle -2^31 bignum correctly.
(scm_num2long_long): rewrite the bigdig case: basically copied
from scm_num2long.
numbers.h: (SCM_BITSPERLONGLONG): deleted.
* unif.c (rapr1): use sprintf instead of intprint for unsigned
longs: intprint can't cope with large values.
* numbers.c (scm_num2ulong): check more consistently that the
input is not negative. if it is, throw out-of-range instead of
wrong-type-arg.
* ramap.c (scm_array_fill_int): don't limit fill to INUM for
uvect, ivect or llvect.
Check that fill doesn't overflow short uniform array.
* __scm.h: add another long to the definition of long_long and
ulong_long.
* unif.c (scm_raprin1): use 'l' instead of "long_long" in the
print representation of llvect. read can't handle more than
one character.
(scm_dimensions_to_uniform_array): make "fill" an optional argument
instead of a rest argument.
* tags.h (scm_tc7_llvect): wasn't defined anywhere, so use the free
tag 29 for now.
* __scm.h: don't mention LONGLONGS.
* unif.c, numbers.c, eq.c, gc.c, print.c, eval.c, ramap.c:
replace LONGLONGS with HAVE_LONG_LONGS as set by configure.
* net_db.c (scm_inet_aton): throw errors using the misc-error key
instead of system-error. inet_aton doesn't set errno.
system-error isn't right in gethost either, since it's throwing
the value of h_errno instead of errno. so:
(scm_host_not_found_key, scm_try_again_key,
scm_no_recovery_key, scm_no_data_key): new error keys.
(scm_resolv_error): new procedure, use the new keys.
(scm_gethost): call scm_resolv_error not scm_syserror_msg.
* error.c: (various): use scm_cons instead of scm_listify
to build short lists.
* boot-9.scm (read-hash-extend to set up arrays): add 'l' for
long_long uniform vectors.
* networking.scm (sethostent, setnetent, setprotoent, setservent):
take an optional argument STAYOPEN. default is #f.
* readline.c (scm_init_readline): set rl_readline_name to Guile,
to allow conditionals in .inputrc.
* fports.c (fport_input_waiting): if select is used, return 1
instead of whatever FD_ISSET expands to. maybe it will be useful
to interpret the value from the input_waiting ptob procedure as a
lower bound on the number of bytes available.
* Mikael asked for a few names to be changed...
* ports.c (scm_make_port_type): take the write procedure as the
second argument instead of the flush procedure.
* ports.h (scm_ptob_descriptor): rename the ptob procedures:
fflush -> flush, read_flush -> end_input, fclose -> close,
fill_buffer -> fill_input, ftruncate -> truncate,
input_waiting_p -> input_waiting.
* ports.c (end_input_void_port): was read_flush_void_port.
(scm_set_port_end_input): was scm_set_port_flush_input.
(scm_set_port_flush): was scm_set_port_write.
(scm_set_port_input_waiting): was scm_set_port_input_waiting_p
(scm_end_input): was scm_read_flush.
(scm_fill_input): was scm_fill_buffer.
(scm_flush): was scm_fflush.
* fports.c (fport_input_waiting): renamed from fport_input_waiting_p.
(fport_end_input): was local_read_flush.
(fport_flush): was local_fflush.
(fport_close): was local_fclose.
(fport_truncate): was local_ftruncate.
(fport_seek): was local_seek.
(fport_free): was local_free.
(fport_fill_input): was fport_fill_buffer.
* strports.c (st_end_input): was st_read_flush.
(st_truncate): was st_ftruncate.
* vports.c: (sf_flush): was sfflush.
(sf_close): was sfclose.
(sf_fill_input): was sf_fill_buffer.
* ports.c, fports.c, strports, vports.c, ioext.c, unif.c, filesys.c:
change callers.
* ports.c (scm_putc, scm_puts),
* unif.c (scm_uniform_array_write): use scm_lfwrite.
* ports.c (scm_putc): change type of first argument from int to char.
* unif.c (scm_uniform_array_read_x), ports.c (scm_getc): increment
read_pos after scm_fill_buffer.
* ioext.c (scm_do_read_line): simplify by ignoring the fill_buffer
return char.
* vports.c (sf_fill_buffer), strports.c (stfill_buffer),
fports.c (fport_fill_buffer): implement the interface change.
* ports.c (scm_fill_buffer): interface change: no longer increments
read_pos past the character that's returned. it seems clearer to
leave it to the caller to decide what to do (thanks Jim).
* vports.c (sf_fill_buffer): put the read char into the buffer
as well as returning it.
* ports.c (scm_grow_port_cbuf): residue of this deleted procedure
deleted.
* unif.c (scm_uniform_array_write): likewise.
* ioext.c (scm_redirect_port): likewise.
* ports.c (scm_putc): call scm_read_flush.
(scm_puts): likewise.
(scm_lfwrite): likewise.
(scm_lseek): likewise.
(scm_ftruncate): likewise.
* ports.c (scm_fill_buffer): don't take pt argument. change callers.
(read_flush_void_port): new proc, for void port ptob.
* vports.c (sf_read_flush): likewise.
* strports.c (st_read_flush): take offset arg.
* fports.c (local_read_flush): use offset, don't reset putback
buffer here.
* ports.h (scm_ptobfuns): let read_flush take an offset argument,
which is the number of chars from the putback buffer.
* ports.c (scm_read_flush): new procedure, resets the putback
buffer before calling the ptob routine.
newline. A bit faster, and definitely hairier.
(scm_read_line): Count newlines here instead.
* strings.c (scm_take_str): New function.
(scm_take0str): Reimplement in terms of scm_take_str. * strings.h
(scm_take_str): New declaration. * ioext.c (scm_read_line): Use
scm_take_str, to avoid copying the string.
Add some simple-minded support for line buffered ports.
* ports.h (SCM_BUFLINE): New flag for ports.
* init.c (scm_init_standard_ports): Request line-buffering on
the standard output port.
* * ports.c (scm_mode_bits): Recognize 'l' as a request for line
buffering.
(scm_putc, scm_puts, scm_lfwrite): If the port is line-buffered,
and there's a newline to be written, flush the port.
* ports.c: (scm_lseek): clear buffers even if just reading current
position.
* fports.c (local_fclose): call local_fflush unconditionally.
(various): don't use the scm_must... memory procs.
* ports.h (scm_port): make read_pos a pointer to const.
strports.c: take care of rw_active and rw_randow.
fports.c: scm_fport_drain_input: removed. do it all in ports.c.
strports.c (scm_mkstrport): check that pos is reasonable.
ioext.c (scm_ftell, scm_fseek): use lseek.
(SCM_CLEAR_BUFFERS): macro deleted.
ioext.c (redirect_port: use ptob fflush, read_flush.
ports.h (scm_ptobfuns): add ftruncate.
ports.c (scm_newptob): set ftruncate.
adjust ptob tables.
* ports.c (scm_ftruncate): new procedure.
fports.c (local_ftrunate), strports.c (str_ftruncate): new procs.
strports.c (st_seek, st_grow_port): new procs.
fports.h (scm_port): change size types from int to off_t.
ports.c (scm_init_ports): initialise the seek symbols here
instead of in ioext.c.
strports.c (scm_call_with_output_string): start with an empty
string, so seek and ftruncate can be used.
* ports.h (scm_ptobfuns): add a read_flush procedure which is the
equivalent to fflush for the read buffer.
* ports.c (scm_newptob): set read_flush.
ports.c (void_port_ptob): set read_flush.
fports.c (local_read_flush): new proc. add to ptob.
strport.c (st_read_flush): likewise.
vport.c (sf_read_flush): likewise.
fports.h (struct scm_fport): remove random member. there's nothing
left but fdes. leaving it as a struct to allow for future changes.
fports.c: replace usage of scm_fport::random with scm_port::rw_random.
ports.c: (scm_putc, scm_puts, scm_lfwrite): call the read_flush
ptob proc if the read buffer is filled.
* ports.h (scm_port): add a rw_random member and replace
reading and writing members with rw_active member.
SCM_PORT_READ/SCM_PORT_WRITE: new values.
* ports.h (struct scm_port_table): add writing and reading members
to replace write_needs_seek: it isn't good enough for non-fports.
ports.c, ioext.c, fports.c: corresponding changes.
(struct scm_port_table): give it a typedef and rename to scm_port.
ports.c, fports.c, strports.c, vports.c, ioext.c, ports.h:
corresponding changes.
* ports.c (scm_newptob): bugfix: set seek member.
* * (scm_lseek): new procedure, using code from ioext.c:scm_fseek
and generalised to all port types.
* scmsigs.c (scm_init_scmsigs): set the SA_RESTART flag for all
signals (it was only being done for handlers installed from Scheme).
Otherwise (for example) SIGSTOP followed by SIGCONT on an interpreter
waiting for input caused an EINTR error from read.
* ports.h (struct scm_port_table): make all the char members
unsigned, so they convert to int without becoming negative if large.
* fports.c (scm_fdes_wait_for_input): forgot to check compilation
with threads enabled. rename this procedure to
fport_wait_for_input and take a port instead of a fdes.
use scm_fport_input_waiting_p instead of scm_fdes_waiting_p.
* readline.c (scm_readline): Applied a patch from Greg Harvey to
get readline support working again: use fdopen to get FILE objects.
* gc.c (scm_init_storage): install an atexit proc to flush the
ports.
(cleanup): the new proc. it sets a global variable which can be
checked by the ptob flush procs to avoid trying to throw
exceptions during exit. not very pleasant but it seems more reliable.
* fports.c (local_fflush): check terminating variable and if set
don't throw exception.
* CHECKME: that the atexit proc is installed if unexec used.
* throw.c (scm_handle_by_message): don't flush all ports here.
it still causes bus errors.
* fports.h (SCM_FPORT_CLEAR_BUFFERS): rename to SCM_CLEAR_BUFFERS
and move to ioext.c.
* fports.c (scm_fdes_waiting_p): merged into fport_input_waiting_p.
* ports.c (scm_char_ready_p): check the port buffer and call the
ptob entry if needed.
* ports.h (scm_ptobfuns): input_waiting_p added. change all the
ptob initialisers. use it in char-ready
* ioext.c (scm_do_read_line): moved from ports.c. make it static.
* vports.c (sfflush): modified to write a char (since softports
currently use shortbuf.)
* fports.c (scm_standard_stream_to_port): moved to init.c and
made static.
* init.c (scm_init_standard_ports): make stdout and stderr
unbuffered if connected to a terminal. with stdio they
were line-buffered by default.
* ports.h (scm_ptobfuns): change fflush return to void.
change flush proc definitions.
* strports.c (scm_call_with_output_string): get size from
buffer instead of port stream.
(scm_strprint_obj): likewise.
(st_flush): new proc.
* ports.h (struct scm_port_table): added write_end member,
as an optimisation. set it where write_buf_size is set.
* ports.h (struct scm_port_table): change stream from void *
back to SCM. SCM presumably must be large enough to hold a
pointer (and probably vice versa but who knows.)
(SCM_SSTREAM): deleted. change users back to SCM_STREAM.
(scm_puts): rewritten
* fports.c (local_ffwrite, local_fputs): removed.
* strports.c (stputc, stputs, stwrite): dyked out (FIXME)
* vports.c (sfputc, sfputs, sfwrite) likewise.
* ports.c (write_void_port, puts_void_port): removed.
(putc_void_port, getc_void_port, fgets_void_port): likewise.
* ports.c (scm_lfwrite): rewritten using fport.c version.
* fports.c (local_fputc): deleted.
* ports.c (scm_add_to_port_table): initialise write_needs_seek.
* ports.h (scm_ptobfuns): add seek function pointer.
* fports.c: set it to local_seek, new procedure.
* fports.h (SCM_MAYBE_DRAIN_INPUT): moved to ports.c.
use ptob for seek. take ptob instead of fport arg.
* ports.h (struct scm_port_table): new member write_needs_seek,
replaces reading member in fport struct.
* vports.c (sfgetc): store the getted char into the buffer.
rename to sf_fill_buffer and install it for fill-buffer in ptob.
the Scheme interface is still a procedure that gets a char.
(scm_make_soft_port): set up the port buffer (shortbuf).
* fports.c (local_fgetc, local_fgets): deleted.
* strports.c (stgetc): likewise.
* ports.c: scm_generic_fgets: likewise.
* ports.h (scm_ptobfuns): add fill_buffer.
* ports.c (scm_newptob): assign it.
* strports.c (scm_mkstrport): set up the buffer.
put just the string into the stream, not cons (pos stream).
(stfill_buffer): new proc.
* ports.h: fport buffer moved into port table: to be
used for all port types.
* throw.c (scm_handle_by_message): flush ports at exit.
* socket.c (scm_sock_fd_to_port): use scm_fdes_to_port.
(scm_getsockopt, scm_setsockopt, scm_shutdown, scm_connect,
scm_bind, scm_listen, scm_accept, scm_getsockname,
scm_getpeername, scm_recv, scm_send, scm_recvfrom,
scm_sendto,
use SCM_FPORT_FDES. use SCM_OPFPORTP not SCM_FPORTP.
* posix.c (scm_getgroups): use SCM_ALLOW/DEFER_INTS.
(scm_ttyname): use SCM_FPORT_FDES.
(scm_tcgetpgrp, scm_tcsetpgrp): likewise.
* ioext.c (scm_isatty_p): use SCM_FPORT_FDES.
(scm_fdes_to_ports): modified.
(scm_fdopen): use scm_fdes_to_port.
* ports.c (scm_init_ports): don't try to flush ports using
atexit(). it's too late, errors will cause SEGV.
* fports.c (scm_fport_buffer_add): new procedure.
* fports.h (SCM_FDES_RANDOM_P): new macro. use it in
scm_fdes_to_port and scm_redirect_port.
* ioext.c (scm_redirect_port): use setvbuf to set buffers in the
new port. reset fp->random.
* fports.c (scm_fdes_to_port), ports.c (scm_void_port),
filesys.c (scm_opendir):
restore defer interrupts while the port is constructed.
* (scm_setvbuf): if mode is _IOFBF and size is not supplied,
derive buffer size from fdes or use a default.
(scm_fdes_to_port): use setvbuf instead of creating the buffers
directly.
vports.c (various places): use SCM_SSTREAM.
strports.c: likewise.
* gdbint.c: likewise.
* ports.h (SCM_SSTREAM): new macro.
* fports.c (scm_input_waiting_p): use scm_return_first, since port
may be removed from the stack by the tail call to scm_fdes_waiting_p.
* fports.h (SCM_CLEAR_BUFFERS): new macro.
* ports.c (scm_force_output): call scm_fflush.
* print.c (scm_newline): don't check errno for EPIPE (it wouldn't
* reach this point.) don't flush port (if scm_cur_outp).
* fports.h (SCM_FPORT_FDES): new macro.
* vports.c (sfflush): don't need to set errno.
* ports.c: install scm_flush_all_ports to be run on exit.
ports.c fports.c ioext.c posix.c socket.c net_db.c filesys.c:
removed all uses of SCM_DEFER/ALLOW ints for now. they were mainly
just protecting errno. some may need to be put back.
* scmsigs.c (take_signal): save and restore errno while this
proc runs.
*fports.c (print_pipe_port, local_pclose, scm_pipob): deleted.
* open-pipe, close-pipe are emulated in (ice-9 popen)
ports.c (scm_ports_prehistory): don't init scm_pipob.
ports.h (scm_tc16_pipe): deleted.
posix.c (scm_open_pipe, scm_close_pipe): deleted.
* ioext.c (scm_primitive_move_to_fdes): use fport.
* fport.c (scm_fport_fill_buffer): flush write buffer if needed.
change arg type from scm_fport to SCM port.
fport.h (SCM_SETFDES): removed.
(SCM_MAYBE_DRAIN_INPUT): new macro.
* ioext.c (scm_dup_to_fdes): use SCM_FSTREAM.
(scm_ftell): always use lseek and account for the buffer.
(scm_fileno): use fport buffer.
(scm_fseek): clear fport buffers. always use lseek.
* posix.c (scm_pipe): use fport buffer.
* unif.c: include fports.h instead of genio.h.
* fports.c (scm_fdes_wait_for_input, scm_fport_fill_buffer): new
procedures.
(local_fgetc): use them.
(local_ffwrite): use buffer.
(local_fgets): use buffer.
(scm_setbuf0): deleted.
(scm_setvbuf): set the buffer.
(scm_setfileno): deleted.
(scm_evict_ports): set fdes directly.
* (scm_freopen): deleted. doesn't seem useful in Guile.
(scm_stdio_to_port): deleted.
fports.h (struct scm_fport): add shortbuf member to avoid separate
code for unbuffered ports.
(SCM_FPORTP, SCM_OPFPORTP, SCM_OPINFPORTP, SCM_OPOUTFPORTP): moved
from ports.h.
* genio.c, genio.h: move contents into ports.c, ports.h. The
division wasn't useful.
* fports.c, fports.h (scm_fport_drain_input): new procedure.
* ports.c (scm_drain_input): call scm_fport_drain_input.
* scm_fdes_waiting_p: new procedure.
* fports.c (scm_fdes_to_port): allocate read and/or write buffers.
(scm_input_waiting_p): check the buffer.
(local_fgetc, local_fflush, local_fputc): likewise.
* fports.h (scm_fport): read/write_buf,_pos,_buf_end,,_buf_size:
new members.
* init.c (scm_init_standard_ports): pass fdes instead of FILE *.
* * ports.c (scm_drain_input): new procedure.
ports.h: prototype.
* fports.c (FPORT_READ_SAFE, FPORT_WRITE_SAFE, FPORT_ALL_OKAY,
pre_read, pre_write): removed.
(local_fputc, local_fputs, local_ffwrite): use write, not stdio.
(scm_standard_stream_to_port): change first arg from FILE * to
int fdes.
(local_fflush): flush fdes, not FILE *.
* fports.h (SCM_NOFTELL): removed.
* genio.c, ports.c: don't include filesys.h.
* genio.c (scm_getc): don't use scm_internal_select if FPORT.
do it in fports.c:local_fgetc.
* genio.c: don't use SCM_SYSCALL when calling ptob procedures.
do it where it's needed in the port smobs.
* filesys.c (scm_input_waiting_p): moved to fports.c, stdio
buffer support removed. take SCM arg, not FILE *.
* filesys.h: prototype moved too.
* fports.c (scm_fdes_to_port): new procedure.
(local_fgetc): use read not fgetc.
(local_fclose): use close, not fclose.
(local_fgets): use read, not fgets
* fports.h: prototype for scm_fdes_to_port.
* fports.h (scm_fport): new struct.
* fports.c (scm_open_file): use open, not fopen.
#include fcntl.h
* ports.h (struct scm_port_table): change stream from SCM to void *.
* ports.c (scm_add_to_port_table): check for memory allocation error.
(scm_prinport): remove MSDOS hair.
(scm_void_port): set stream to 0 instead of SCM_BOOL_F.
(scm_close_port): don't throw errors: do it in fports.c.
this finding! :) Preliminary dating suggests an almost 4 year old
remnant from the SCM ancestor. The sample has been removed from
the finding site and is now safely stored in the repository.
* numbers.h: Removed prototype for num2long.
* unif.c (scm_array_set_x): Use scm_num2long instead of num2long.
* gh_data.c (gh_scm2doubles): Make it possible to pass result
array as second arg.
(gh_chars2byvect, gh_shorts2svect, gh_floats2fvect, gh_scm2chars,
gh_scm2shorts, gh_scm2longs, gh_scm2floats): New functions.
* gh.h: Updated and added prototypes.
* gh_data.c (gh_ints2scm): Handle integers outside INUM limits.
#bytes(...) to #y(...), and syntax for short vectors from
#short(...) to #h(...). This may seem nutty, but, like the other
uniform vectors, byte vectors and short vectors want to have the
same print and read syntax (and, more basic, want to have read
syntax!). Changing the read syntax to use multiple characters
after the hash sign breaks with the conventions used in R5RS and
the conventions used for the other uniform vectors. It also
introduces complexity in the current reader, both on the C and
Scheme levels. (The Right solution is probably to change the
syntax and prototypes for uniform vectors entirely.)
marking code, and make marker routines only responsible for
turning up outgoing pointers.
* gc.c (scm_gc_mark): Set the mark bit on ports and smobs here,
before calling the marking function. Don't call the marking
function if it's zero.
* markers.c (scm_mark0): Just return #f. This function isn't
necessary at all now, but it's harmless to call it. We'll leave
it in so other folks' code doesn't croak at link time.
(scm_markcdr): Don't call SCM_SETGC8MARK.
* async.c (mark_async): Don't call SCM_SETGC8MARK.
* dynl.c (mark_dynl_obj): Same.
* root.c (mark_root): Same.
* srcprop.c (marksrcprops): Same.
* unif.c (markra): Same.
* variable.c (scm_markvar): Same.
* ports.c (scm_markstream): Same.
(void_port_ptob): Specify zero for our marking function.
* debug.c (debugobjsmob): Same.
* dynwind.c (guardsmob): Same.
* filesys.c (dir_smob): Same.
* fluids.c (fluid_smob): Same.
* fports.c (scm_fptob, scm_pipob): Same.
* mallocs.c (mallocsmob): Same.
* regex-posix.c (regex_t_smob): Same.
* smob.c (freecell, flob, bigob): Same.
* threads.c (thread_smob, mutex_smob, condvar_smob): Same.
* throw.c (jbsmob, lazy_catch_funs): Same.
warning.
* eval.c, numbers.c, unif.c, srcprop.c: Added a few curly braces
to avoid compiler warnings.
* dynl-dl.c (sysdep_dynl_func): Only define usymb if needed.
* dynl.c (scm_dynamic_func): Cast return value from sysdep_dynl_func.
* extchrs.c (xmbtowc): Make the second arg a normal char, not
unsigned, because that's what the ANSI function takes.
* extchrs.h (xmbtowc): Corresponding change to prototype.
* genio.c (scm_gen_getc): Make buf plain chars. Nobody wants
uchars here.
* mbstrings.c (scm_mb_ilength): Use ANSI arg syntax. Make DATA
argument plain char *.
* strings.c (scm_string): Use SCM_ROCHARS, since c is a plain
char.
* tag.c (scm_tag): Remove unreachable statement.
* unif.c (scm_array_to_list): If we want to shift a 1 bit to the
top of the word, it should be unsigned.
unif.c.
strop.h: move prototypes too.
* posix.c (scm_init_posix): don't intern EINTR since it's now done
elsewhere.
* ioext.c (scm_init_ioext): don't intern stat macros, S_IRUSR
etc. I deleted them from filesys.c long ago, but didn't
notice they were here too (although ineffective since
sys/stat.h wasn't included).
* Makefile.am: remove AWK=@AWK@.
Add a rule for generating errnos.list.
(CLEANFILES): put errnos.list here instead of in DISTCLEANFILES.
* configure.in: add AC_SUBST(AWK) and AC_SUBST(ERRNO_EXTRACT).
don't extract errnos, just set a variable (avoids the
need to recompile error.c just because configure is run.)
* unif.h: update prototypes.
* unif.c (scm_uniform_array_read,write): change the offset and
length arguments to start and end, for consistency.
* __scm.h: uncomment SCM_ARG6 and SCM_ARG7, I needed SCM_ARG6.
* ioext.h: update prototypes.
* * ioext.c (scm_read_delimited_x): replaces scm_read_line and
scm_read_line_x, it's a more general procedure using an
interface from scsh. read-line and read-line! are now defined
in boot-9.scm.
* Note that the new read-line trims the terminator
by default, previously it was appended to the returned string. An
optional argument specifies how to process the terminator (scsh
compatible). For the old behaviour: (read-line port 'concat).
scm_read_line, scm_read_line_x: deleted. (read-line port 'split)
returns a pair, but is converted to multiple values if the scsh
module is loaded.
socket.h: update prototypes.
* socket.c (scm_recvfrom): for consistency with other procedures,
take start and end as separate optional arguments.
* (scm_recv, scm_recvfrom): don't allow the second argument
to be a size, only a buffer. Change the scheme names to
recv! and recvfrom!. Don't return the buffer.
* ioext.h, posix.h: move prototypes too.
* ioext.c, posix.c (scm_read_line, scm_read_line_x, scm_write_line:
moved back from posix.c to ioext.c. Also move #includes of "genio.h"
"read.h" and "unif.h".
* ioext.c: include "chars.h"
primitives.
load errno.scm.
* netconst.scm: undefine maybe-define and maybe-define-so after use.
* errno.scm: new file.
* fports.c (scm_open_file): pass errno to scm_syserror_msg.
* filesys.h: update prototypes. Remove macros: SCM_FD_P, SCM_FD_FLAGS,
SCM_FD.
* filesys.c (scm_sys_stat, scm_sys_lstat): pass errno to
scm_syserror_msg.
* (scm_sys_read_fd, scm_sys_write_fd, scm_sys_close, scm_sys_lseek,
scm_sys_dup): deleted: FD capability will be added to other
procedures.
* Remove support for the FD object type: scm_tc16_fd, scm_fd_print,
scm_fd_free, fd_smob, scm_intern_fd.
* (scm_open): renamed from scm_sys_open. Return a port instead of
an FD object. Make the mode argument optional.
* (scm_sys_create): deleted, it's just a special case of open.
(scm_init_filesys): move interning of constants O_CREAT etc.,
here (were previously using SCM_CONST_LONG macro).
Add missing constants: O_RDONLY, O_WRONLY, O_RDWR, O_CREAT.
don't newsmob fd.
(numerous _sys_ procedures): remove gratuitous _sys_ from names.
include "fports.h" and <stdio.h>
(scm_stat, scm_select): don't support FD objects.
* error.h: adjust scm_syserror_msg prototype.
* error.c (scm_syserror_msg): take an extra argument for errno.
Using the global value didn't always work, since it could be
reset by procedure calls in the message or args arguments.
* fports.c (scm_setbuf0): call setbuf even if FIONREAD is not defined.
I don't understand why the check was there (and what about the
ultrix check?)
* strop.c (scm_string_copy): allow shared substrings to be copied.
* unif.h: corresponding change to prototypes.
* unif.c (scm_uniform_array_read_x, scm_uniform_array_write_x):
recognize two new optional arguments: offset and length. Allow
the port argument to be an integer (file descriptor, for scsh).
Include <unistd.h> for "read" prototype.
ANSI declarations combined with K&R definitions. We'll
appease it a little bit. But when it invades France, we fight.
* print.c (scm_iprlist): Change 'tlr' argument to an int.
* print.h (scm_iprlist): Here too.
* numbers.c (scm_divbigdig): Change definition to match
declaration in numbers.h.
* unif.c (scm_makflo): Change definition to match declaration in
unif.h.
variables aren't used uninitialized.
* error.h (scm_error, scm_syserror, scm_syserror_msg,
scm_sysmissing, scm_num_overflow, scm_out_of_range,
scm_wrong_num_args, scm_wrong_type_arg, scm_memory_error,
scm_misc_error): Tell GCC that these functions never return.
* struct.c (scm_struct_ref, scm_struct_set_x): If we can't figure
out the field type, call abort if SCM_ASSERT returns, to placate
the optimizer.
* stacks.c (scm_make_stack, scm_last_stack_frame): abort if
scm_wta ever returns. We can't handle this case anyway, and this
gives the optimizer more information.
* unif.c (scm_uniform_vector_ref, scm_array_set_x): Abort if
scm_wta ever returns.
In some cases, the code is fine, but GCC isn't smart enough to
figure that out; this usually happens when one variable is only
initialized and used when a particular condition holds true, and
we know that condition will never change within a given invocation
of the function. In this case, we simply initialize the variables
to placate the compiler, hopefully to a value which will cause a
crash if it is ever actually used.
* print.c (scm_iprin1): Initialize mw_pos.
* read.c (scm_lreadrecparen): Initialize tl2, ans2.
* throw.c (scm_ithrow): Initialize dynpair.
* unif.c (scm_uniform_vector_ref): Initialize cra.
* struct.c (init_struct): Initialize prot.
* mbstrings.c (scm_print_mb_symbol): Initialize mw_pos and inc.
srcprop.h, tags.h, throw.c, unif.c: Added new selectors
SCM_SETAND_CAR, SCM_SETAND_CDR, SCM_SETOR_CAR and SCM_SETOR_CDR.
Motivation: Safer use. Some other macros are defined in terms of
these operations. If these are defined using the SCM_SETCXR
(<e1>, SCM_CXR (<e1>) <op> <e2>) pattern a complex <e1> will lead
to inefficiency and an <e1> with side-effects could potentially
break. Also, these particular operations are heavily utilized in
the garbage collector. In unoptimized code there will be a
measurable speedup.
* alist.c, arbiters.c, continuations.c, debug.c, debug.h, eval.c,
eval.h, feature.c, filesys.c, fports.c, gc.c, gsubr.c, init.c,
ioext.c, kw.c, list.c, load.c, mallocs.c, numbers.c, numbers.h,
pairs.c, pairs.h, ports.c, ports.h, posix.c, procprop.c, procs.c,
procs.h, ramap.c, read.c, root.c, srcprop.c, srcprop.h,
strports.c, symbols.c, tags.h, throw.c, unif.c, variable.c,
vports.c: Cleaned up use of pairs: Don't make any special
assumptions about the internal structure of selectors and
mutators: SCM_CXR (<e1>) = <e2> --> SCM_SETCXR (<e1>, <e2>),
SCM_CXR (<e1>) &= <e2> --> SCM_SETAND_CXR (<e1>, <e2>) etc.
(Among other things, this change makes it easier to build Guile
with certain compilers which have problems with casted lvalues.)
integer (assuming for now accepting an integer is a good thing).
* error.c, fports.c: replace use of %S in lgh_error args with %s.
%S will be used instead for write'ing arguments.
* unif.c (scm_transpose_array): change arguments in the SCM_WNA
asserts. fix a few other asserts.
(scm_aind, scm_enclose_array, scm_array_in_bounds_p,
scm_uniform_vector_ref, scm_array_set_x,
scm_dimensions_to_unform_array): change args in
SCM_WNA SCM_ASSERTS and change scm_wta's to scm_wrong_num_args.
strop.c (scm_substring_move_left_x, scm_substring_move_right_x,
scm_substring_fill_x): likewise.
gsubr.c (scm_gsubr_apply): likewise.
eval.c (SCM_APPLY): likewise.
* eval.c (4 places): replace scm_everr with lgh_error or
scm_wrong_num_args.
* error.c, error.h (scm_wrong_num_args, scm_wrong_type_arg,
scm_memory_error): new procedures.
* scm_everr: deleted. can use scm_wta, dropping first two args.
scm_error: convert NULL subr to SCM_BOOL_F.
* __scm.h: don't define SCM_STACK_OVFLOW, SCM_EXIT, SCM_ARG6, SCM_ARG7,
SCM_ARGERR.
* stackchk.c (scm_report_stack_overflow): use lgh_error instead
of scm_wta.
* error.c, error.h: new error keys: scm_arg_type_key,
scm_args_number_key, scm_memory_alloc_key, scm_stack_overflow_key,
scm_misc_error_key.
scm_wta: reimplement using lgh_error instead of scm_everr.
wta for range errors (ASSERT still needs work).
* error.c, error.h (scm_out_of_range): new procedure.
* error.c, error.h (scm_out_of_range_key): new key.
* posix.c (scm_sync): #else was missing.
* error.c, error.h: append _key to names scm_num_overflow and
scm_system_error.
* __scm.h (SCM_SYSMISSING, SCM_NUM_OVERFLOW): use SCM_BOOL_F instead
of consing an empty list.
(SCM_SYSERROR etc.): move into error.c, make them procedures instead
of macros, saves code and string space.
error.c, fports.c, numbers.c, posix.c, ioext.c, filesys.c, socket.c,
fdsocket.c, simpos.c: change names of SCM_SYSERROR etc., to
lower case. Rename scm_syserror_m to scm_syserror_msg.
error.h: prototypes for new procedures.
