* libguile/vm-engine.c (RETURN_ONE_VALUE, RETURN_VALUE_LIST): These
helpers, used in subr-call and the like, might not actually have
enough space to push the return values. Use ALLOC_FRAME instead of
RESET_FRAME, for that reason.
* libguile/vm-engine.c (allocate-struct, struct-ref, struct-set!): New
instructions, to complement their "immediate" variants.
* module/language/cps/compile-bytecode.scm (compile-fun):
* module/system/vm/assembler.scm (system): Wire up the new instructions.
* libguile/vm-engine.c (vm_engine): Always invoke the apply hook after
the ip has been reset. Avoids problems in frame-bindings, which
builds its bindings map based on the IP. Invoke push-continuation
before linking the new frame, so that more locals are available to the
frame inspector.
* module/system/vm/traps.scm (trap-in-procedure): No need for a
push-cont handler, as the apply handler will exit the frame.
* libguile/vm-engine.c (make-array): Change to only have
restricted-width operands in the first word. This instruction is
currently unused, however.
* module/system/vm/assembler.scm (assembler):
* module/system/vm/disassembler.scm (disassembler): Disallow
restricted-width operands in tail words.
* libguile/vm.c (vm_error_unbound, vm_error_unbound_fluid): Remove proc
argument. The value in slot 0 is not necessarily the procedure being
applied, after the prelude is done.
* libguile/vm-engine.c (vm_engine): Use LOCAL_REF (0) instead of
SCM_FRAME_PROGRAM, and adapt to above changes.
* libguile/vm-engine.c (BR_UNARY, BR_BINARY, BR_ARITHMETIC): A jump with
a zero offset is also a backward branch, in the sense that it's not a
forward branch.
("br"): We forgot to VM_HANDLE_INTERRUPTS here on backwards branches.
Oops!
* libguile/vm.c:
* libguile/vm-engine.c: Change the one use of
VM_ENABLE_PARANOID_ASSERTIONS to ASSERT. That becomes the one use of
VM_ENABLE_ASSERTIONS, so disable that too.
* libguile/vm-engine.c (ALLOC_FRAME): Fold CHECK_OVERFLOW into this
routine, and rework to not extend vp->sp until the stack has been
expanded.
* libguile/vm.c (vm_increase_sp): Likewise, don't extend vp->sp until
the stack has expanded.
(vm_expand_stack): Rework to take the new stack pointer as an
argument, and also to update vp->sp_max_since_gc and vp->sp.
* libguile/tags.h (SCM_TYP7S, SCM_HAS_TYP7S): Remove these, as we no
longer do the differs-by-one-bit thing for vectors and weak vectors.
* libguile/vectors.h (SCM_I_IS_VECTOR): Use SCM_HAS_TYP7.
(SCM_I_IS_NONWEAK_VECTOR): Remove.
* libguile/vm-engine.c (vector-length, vector-ref, vector-set!)
(vector-ref/immediate, vector-set!/immediate): We can inline these
instructions completely now.
* libguile/vm.c (vm_error_not_a_vector, vm_error_out_of_range): New
error conditions.
* libguile/vm.c (vm_increase_sp): New interface, to increase the SP to
some new level, possibly expanding the stack.
(vm_push_sp, vm_restore_sp): Intefaces to vm_increase_sp.
(vm_return_to_continuation): Don't throw an error if there's not
enough space; instead, expand.
(vm_reinstate_partial_continuation): Use the new helper.
(return_unused_stack_to_os): Avoid off-by-one error (sp points to
valid memory.)
(scm_call_n): Never write beyond the sp.
* module/language/cps.scm ($callk): New expression type, for calls to
known labels. Part of "low CPS".
* module/language/cps/arities.scm:
* module/language/cps/closure-conversion.scm:
* module/language/cps/compile-bytecode.scm:
* module/language/cps/dce.scm:
* module/language/cps/dfg.scm:
* module/language/cps/effects-analysis.scm:
* module/language/cps/simplify.scm:
* module/language/cps/slot-allocation.scm:
* module/language/cps/verify.scm: Adapt call sites.
* libguile/vm-engine.c (call-label, tail-call-label): New instructions.
Renumber the rest; this is an ABI change.
* libguile/_scm.h (SCM_OBJCODE_MINOR_VERSION):
* module/system/vm/assembler.scm (*bytecode-minor-version*): Bump.
* doc/ref/compiler.texi (CPS in Guile): Document $callk.
* libguile/bdw-gc.h: Remove a needless compatibility hack.
* libguile/gc-inline.h: New file, implementing thread-local freelists
providing faster allocation if we already have a scm_i_thread*
pointer. Based on gc_inline.h from libgc.
* libguile/threads.h (scm_i_thread): Add freelists here.
* libguile/threads.c (guilify_self_1, guilify_self_2): Initialize
freelists.
* libguile/vm.c: Include gc-inline.h.
* libguile/vm-engine.c: Rename current_thread to thread. Use
scm_inline_cons instead of scm_cons, scm_inline_cell instead of
scm_cell, and scm_inline_words instead of words.
* libguile/vm.h (struct scm_vm): Reorder fields. Add "sp_max_since_gc"
field.
* libguile/vm-engine.c (ALLOC_FRAME, RESET_FRAME):
* libguile/vm.c (vm_return_to_continuation)
(vm_reinstate_partial_continuation, scm_call_n): In places where we
could increase the stack height, update sp_max_since_gc.
(vm_expand_stack): Relocate sp_max_since_gc on expansion.
(scm_bootstrap_vm): Record the page size using gnulib's getpagesize.
(return_unused_stack_to_os): New routine, run when marking stacks.
* libguile/vm-engine.c: Remove VM_HANDLE_INTERRUPTS before entering a
subr or foreign call. The bytecode stub will have already done so
when entering the stub, and the return sequence handles doing so
before returning.
* libguile/_scm.h (SCM_ASYNC_TICK_WITH_GUARD_CODE): New macro.
* libguile/vm-engine.c (VM_HANDLE_INTERRUPTS): Restore FP after
ticking.
(CACHE_FP): New macro.
(CHECK_OVERFLOW): Use CACHE_FP.
(BR_ARITHMETIC, RETURN_EXP, RETURN_ONE_VALUE, BINARY_INTEGER_OP):
(call, return-values, subr-call, foreign-call)
(resolve, define!, toplevel-box, module-box): Restore the FP from the
vp where needed.
* libguile/vm-engine.c (VM_NAME): Add explicit nopcodes, later to be
interspersed with others. This will allow us some extensibility
without always shuffling around opcodes. Also avoid lazy
initialization; have the linker do it for us.
* libguile/instructions.c (parse_instruction):
(scm_instruction_list): Rework instruction parsing to avoid using
malloc. It would seem that this would fix some GC issue -- but who
knows!
* libguile/vm-engine.c (CACHE_REGISTER): Remove an unneeded cast.
(VM_NAME):
* libguile/vm.c (scm_call_n): Setjmp out here. This leaves the VM
without any initialization work to do. It also makes it possible to
restart the VM in another mode (with hooks, for example).
* libguile/vm-engine.c:
* libguile/vm.c (scm_call_n): Move boot continuation setup to
scm_call_n, so that vm-engine takes all of its state from the vp.
* libguile/vm-engine.c (VM_NAME): Take the current thread as an
argument.
* libguile/vm.c (scm_i_capture_current_stack): Call thread_vm.
(thread_vm): New helper.
(scm_the_vm): Call thread_vm.
(scm_call_n): Call thread_vm. Avoids a double TLS lookup.
* libguile/control.h:
* libguile/control.c (reify_partial_continuation, scm_c_abort): Take
struct scm_vm *vp as an arg.
* libguile/dynstack.h: Remove control.h include.
* libguile/vm.c (vm_abort): Take struct scm_vm *vp as an arg.
* libguile/vm-engine.c (abort): Adapt to vm_abort change.
* libguile/dynstack.h:
* libguile/dynstack.c (PROMPT_FP, PROMPT_SP):
(scm_dynstack_push_prompt, scm_dynstack_find_prompt): Prompts on the
dynstack are recorded as offsets from the base stack address in this
thread.
* libguile/control.c (scm_c_abort):
* libguile/eval.c (eval):
* libguile/stacks.c (find_prompt, narrow_stack):
* libguile/throw.c (pre_init_catch):
* libguile/vm-engine.c (prompt): Adapt.
* libguile/vm-engine.c (RUN_HOOK, RUN_HOOK0, RUN_HOOK1): Rework to
dispatch through specific per-hook procedures. Might reduce register
pressure in the VM.
* libguile/vm.c (vm_dispatch_apply_hook):
(vm_dispatch_push_continuation_hook):
(vm_dispatch_pop_continuation_hook):
(vm_dispatch_next_hook):
(vm_dispatch_abort_hook):
(vm_dispatch_restore_continuation_hook): New internal helpers.
* libguile/vm-engine.c:
* libguile/vm.c: Rework VM inclusion so that we don't define VM_ENGINE
and expect vm-engine.c to understand that -- since there is only
VM_USE_HOOKS, define that in vm.c directly. Rename rtl_vm_foo to
vm_foo.
* libguile/vm.h: Remove scm_t_vm_engine typedef.
* libguile/frames.h (SCM_FRAME_RTL_RETURN_ADDRESS)
(SCM_FRAME_SET_RTL_RETURN_ADDRESS): Remove. The variants without _RTL
now work fine.
(struct scm_vm_frame): Change the return address to be a
scm_t_uint32*.
(struct scm_frame): Change IP to be scm_t_uint32*.
* libguile/frames.c (scm_c_make_frame)
* libguile/control.c (reify_partial_continuation, scm_c_abort)
* libguile/dynstack.c (PROMPT_IP)
(scm_dynstack_push_prompt, scm_dynstack_find_prompt)
* libguile/dynstack.h:
* libguile/vm-engine.c (SYNC_IP, RETURN_ONE_VALUE)
(call, return-values, prompt): Adapt.
* libguile/frames.h: Change so that fp points at local 0 instead of
local 1, and clean up a bit.
(struct scm_vm_frame): Remove program, and rename stack to locals.
(SCM_FRAME_DATA_ADDRESS): Remove; it was redundant with
SCM_FRAME_LOWER_ADDRESS.
(SCM_FRAME_STACK_ADDRESS): Remove; replace with the new
SCM_FRAME_LOCALS_ADDRESS.
(SCM_FRAME_UPPER_ADDRESS): Remove; unused.
(SCM_FRAME_NUM_LOCALS, SCM_FRAME_PREVIOUS_SP): New defines.
(SCM_FRAME_BYTE_CAST, SCM_FRAME_STACK_CAST): Remove; unused;
(SCM_FRAME_LOCAL): New define, replaces SCM_FRAME_VARIABLE.
(SCM_FRAME_PROGRAM): Add cautionary commentary.
* libguile/frames.c: Adapt static asserts.
(scm_frame_num_locals, scm_frame_local_ref, scm_frame_local_set_x):
Adapt. This means that frame-local-ref 0 now returns the procedure.
* libguile/vm-engine.c (ALLOC_FRAME, RESET_FRAME)
(FRAME_LOCALS_COUNT, LOCAL_REF, LOCAL_SET, RETURN_VALUE_LIST): Adapt
to change in fp.
(LOCAL_ADDRESS): New helper.
(POP_CONTINUATION_HOOK): Reimplement, taking the previous FP as an
argument.
(ABORT_CONTINUATION_HOOK): Reimplement, taking no arguments.
(RETURN_ONE_VALUE): Reimplement.
(RETURN_VALUE_LIST): Adapt to FP change.
(halt, return-values, subr-call, foreign-call, prompt)
(continuation-call, compose-continuation, call/cc, abort): Adapt to FP
change, mostly via using LOCAL_ADDRESS, etc abstractions instead of
using the raw frame pointer.
* libguile/control.c (reify_partial_continuation): Update for fp
change.
* libguile/vm.c (vm_reinstate_partial_continuation): Adapt to removal of
SCM_FRAME_UPPER_ADDRESS.
* module/system/vm/frame.scm (frame-call-representation): Adapt to
frame-local-ref change.
* module/system/vm/trace.scm (print-return): Remove unused
frame-num-locals call.
* libguile/_scm.h (SCM_OBJCODE_MINOR_VERSION): Bump for frame layout
change.
* libguile/frames.c: Update some static checks.
(scm_frame_num_locals, scm_frame_local_ref, scm_frame_local_set_x):
Update to not skip over uninitialized frames, as that's not a thing
any more.
* libguile/frames.h: Update to remove MVRA. Woo!
* libguile/vm-engine.c (ALLOC_FRAME, RETURN_ONE_VALUE):
(rtl_vm_engine): Update for 3 words per frame instead of 4.
* libguile/vm.c (vm_return_to_continuation): Likewise.
* module/language/cps/slot-allocation.scm (allocate-slots): 3 words per
frame, not 4.
* module/system/vm/assembler.scm (*bytecode-minor-version*): Bump. Also
remove a couple of tc7's that aren't around any more.
* libguile/_scm.h (SCM_OBJCODE_MINOR_VERSION): Bump.
* libguile/objcodes.c (process_dynamic_segment): Expect the minor
version to be present and, while we are still banging on the VM,
exactly equal to SCM_OBJCODE_MINOR_VERSION.
* libguile/vm-engine.c: Renumber ops. Remove the general make-vector.
Rename constant-FOO to FOO/immediate. Remove struct-ref and
struct-set!, replace with struct-ref/immediate and
struct-set!/immediate.
* module/Makefile.am:
* module/language/cps/specialize-primcalls.scm: New pass, inlines FOO to
FOO/immediate -- e.g. vector-ref to vector-ref/immediate.
* module/language/cps/arities.scm: Remove struct-set! case, now that
there is no struct-set! opcode.
* module/language/cps/compile-rtl.scm (compile-fun): Remove dispatch to
constant-FOO versus FOO here -- that decision is made by
specialize-primcalls.
(optimize): Add specialize-primcalls pass.
* module/language/cps/dfg.scm (constant-needs-allocation?): Adapt to
name changes.
* module/language/tree-il/primitives.scm (*interesting-primitive-names*):
(*primitive-constructors*): Add allocate-struct.
* module/system/vm/assembler.scm (*bytecode-major-version*):
(*bytecode-minor-version*, link-dynamic-section): Write minor version
into resulting image.
* libguile/Makefile.am:
* libguile/vm-i-loader.c:
* libguile/vm-i-scheme.c:
* libguile/vm-i-system.c: Remove the old VM files, and the rules to
build the .i files.
* libguile/vm-engine.c:
* libguile/vm.c: Remove the old VM. Woot!
* libguile/_scm.h (SCM_OBJCODE_COOKIE, SCM_OBJCODE_ENDIANNESS_OFFSET)
(SCM_OBJCODE_WORD_SIZE_OFFSET): Remove.
* libguile/evalext.c (scm_self_evaluating_p): Remove objcode and program
cases.
* libguile/frames.c (scm_frame_num_locals, scm_frame_previous): Remove
program cases.
* libguile/gc.c (scm_i_tag_name): Remove objcode case.
* libguile/goops.c (scm_class_of, create_standard_classes): Remove
objcode and program cases.
* libguile/instructions.h:
* libguile/instructions.c (scm_instruction_list, scm_instruction_p)
(scm_instruction_length, scm_instruction_pops, scm_instruction_pushes)
(scm_instruction_to_opcode, scm_opcode_to_instruction): Remove old VM
code.
* libguile/objcodes.h:
* libguile/objcodes.c: Remove the objcode data type, and handling for
objcode files.
* libguile/print.c: Remove objcode and program printers.
* libguile/procprop.c: Remove program cases.
* libguile/procs.c:
* libguile/programs.h:
* libguile/programs.c: Remove old program code.
* libguile/smob.c: Remove objcodes include.
* libguile/snarf.h: Remove static program defines.
* libguile/stacks.c: Remove program case.
* libguile/tags.h: Remove program and objcode tc7s.
* module/ice-9/session.scm (procedure-arguments)
* module/language/tree-il/analyze.scm (validate-arity)
* module/statprof.scm (get-call-data, procedure=?)
* module/system/vm/frame.scm (frame-bindings)
(frame-call-representation): Remove old program cases.
* module/system/repl/debug.scm (frame->module): Add a FIXME.
* module/system/vm/instruction.scm: Remove old exports.
* module/system/vm/program.scm: Remove old program code.
* libguile/vm-engine.c (br-if-npos-gt): New instruction (sigh!). For
case-lambda* dispatching on the number of positional args, as the
manual describes. Renumber other opcodes.
