* gdbinit: Untested attempts to get the stack fondling macros to deal
with the new program representation.
* libguile/frames.c (scm_vm_frame_arguments, scm_vm_frame_source)
(scm_vm_frame_local_ref, scm_vm_frame_local_set_x): SCM_PROGRAM_DATA is
a struct scm_objcode*.
* libguile/instructions.h:
* libguile/instructions.c: Hide the instruction table and the struct
scm_instruction structure; all access to instructions now goes through
procedures. This is because instructions are no longer in a packed
array indexed by opcode. Also, declare a mask that all instructions
should fit in.
* libguile/objcodes.h:
* libguile/objcodes.c: Rewrite so that object code directly maps its
arity and length from its bytecode. This makes it unnecessary to keep
this information in programs, allowing programs to be simple conses
between the code (objcodes) and data (the object table and the closure
variables).
* libguile/programs.c (scm_make_program): Rework so that make-program
takes objcode, an object table, and externals as arguments. It's much
clearer this way, and we avoid malloc().
* libguile/stacks.c (is_vm_bootstrap_frame): Update for program/objcode
changes.
* libguile/vm-engine.c (vm_run): Initialize the jump table on the first
run, with the opcodes declared in the instruction sources, and with bad
instructions raising an error instead of wandering off into the
Unknown.
* libguile/vm-engine.h (FETCH_LENGTH): Always represent lengths as 3
bytes. The old code was too error-prone.
(NEXT_JUMP): Mask the instruction with SCM_VM_INSTRUCTION_MASK.
(NEW_FRAME): Update for program/objcode changes.
* libguile/vm-expand.h (VM_DEFINE_FUNCTION, VM_DEFINE_INSTRUCTION)
(VM_DEFINE_LOADER): Update so that we explicitly specify opcodes, so
that we have a stable bytecode API.
* libguile/vm-i-loader.c: Update license to LGPLv2+. Explicitly declare
opcodes.
(load-integer): Use an int instead of a long as the accumulator; still
need to revisit this code at some point, I think.
(load-program): Simplify, thankfully!! Just creates the objcode slice
and rolls with it.
* libguile/vm-i-scheme.c: Number the opcodes explicitly.
* libguile/vm-i-system.c: Update license to LGPLv2+. Explicitly declare
opcodes.
(make-closure): Update for new program API.
* libguile/vm.c (vm_make_boot_program): Update for new program/objcode
API. Still a bit ugly.
(scm_load_compiled_with_vm): Update for new program/objcode API.
* module/language/assembly.scm (byte-length): Fix byte-length calculation
for loaders, and load-program.
(code-pack, code-unpack): Start to move things from (system vm conv)
here.
(object->code, code->object): More things from conv.scm.
* module/language/glil.scm (<glil-program>): Add a new field,
closure-level.
(make-glil-program, compute-closure-level): Calculate the "closure
level" when making a glil program. This is the maximum depth of
external binding refs in this closure.
(unparse-glil): Fix label serialization.
* module/language/glil/compile-assembly.scm (make-meta): Prepend #f for
the meta's object table, though maybe in the future we can avoid
creating assembly in the first place.
(assoc-ref-or-acons, object-index-and-alist): GRRR! Caught again by the
different sets of arguments to assoc and assoc-ref!
(glil->assembly): Attempt to make the <glil-program> case more
readable, and fix the bugs. Sorry I don't know how to comment this
change any more than this.
(glil->assembly): For <glil-module> serialize the whole key, not just
the name.
(dump-object): subprogram-code is already a list. Serialize integers as
strings, not u8vectors. Fix the order of lists and vectors.
* module/language/glil/spec.scm (glil): Switch orders, so we prefer glil
-> assembly -> objcode. Actually glil->objcode doesn't work any more,
needs to be removed I think.
* module/language/objcode/spec.scm (objcode->value):
s/objcode->program/make-program/.
* module/language/scheme/inline.scm: Add acons inline.
* module/system/vm/conv.scm (make-byte-decoder): Skip the first 8 bytes,
they are header. Handle subprograms properly. Still needs help though.
(decode-length): Lengths are always 3 bytes now.
* module/system/vm/disasm.scm: Superficial changes to keep things
working. I'd like to fix this better in the future.
* module/system/vm/frame.scm (bootstrap-frame?): Fixes for
program-bytecode.
* module/system/vm/program.scm: Export make-program. It's program-objcode
now, no more program-bytecode.
* module/system/vm/vm.scm (vm-load): Use make-program.
* test-suite/tests/asm-to-bytecode.test: New test, very minimal.
* module/system/vm/objcode.scm: Export word-size, byte-order, and
write-objcode.
* libguile/programs.h (struct scm_program): Remove the module and meta
fields.
* libguile/programs.c (scm_c_make_program): Add a new argument, `objs'.
If it's a vector, we'll look for the module and the metadata in there,
instead of having them in the scm_program structure.
(scm_c_make_closure, program_mark, scm_program_meta)
(scm_c_program_source, scm_program_module): Adapt to the new program
representation.
* libguile/objcodes.c (scm_objcode_to_program): Pass #f as the object
table when making the program.
* libguile/vm-engine.h (CACHE_PROGRAM):
* libguile/vm-engine.c (vm_run): Rework to use the simple vector API for
getting the current object table. Call the helper,
vm_make_boot_program, to make the boot program.
* libguile/vm-i-loader.c (load-program): Set the current module and the
meta in the object vector, which we pass to scm_c_make_program.
* libguile/vm-i-system.c (toplevel-ref, toplevel-set): Adapt to the new
program representation.
* module/language/glil/compile-objcode.scm (codegen): Clarify.
* libguile/vm-engine.h (PUSH_LIST): Add a parameter to check that the
list was proper.
* libguile/vm-i-system.c: Adapt PUSH_LIST callsites to pass SCM_NULLP or
SCM_NULL_OR_NIL_P, as appropriate. Add a check to return/values*.
* libguile/vm.c: Add lang.h header for SCM_NULL_OR_NIL_P.
* test-suite/tests/elisp.test: Fix XFAIL for elisp + apply.
* doc/ref/vm.texi (Stack Layout): Update to remove references to the
"heap link".
* gdbinit: Update for "heap link" removal.
* libguile/frames.c:
* libguile/frames.h: Update macros and diagram for removal of "heap
link". As part of this, we also remove "heap frames", replacing them
with "vm frames", which are much like the interpreter's debug objects,
but for VM stacks. That is to say, they don't actually hold the stack
themselves, just the pointers into stack that's held by a continuation
(either captured or current).
* libguile/stacks.c (stack_depth, read_frames): Since a "stack" object is
really a copy of information that comes from somewhere else, it makes
sense to copy over info from the VM, just as `make-stack' does from the
evaluator. The tricky bit is to figure out how to interleave VM and
interpreter frames. We do that by starting in the interpreter, and
whenever the current frame's procedure is actually a program, we switch
to the VM stack, switching back when we reach a "bootstrap frame". The
last bit is hacky, but it does work...
(is_vm_bootstrap_frame): Hacky predicate to see if a VM frame is a
bootstrap frame.
(scm_make_stack): Accept a VM frame in addition to debug frames.
Probably has some bugs in this case. But in the case that the arg is
#t (a common case), do the right thing, capturing the top VM frame as
well, and interleaving those frames appropriately on the stack.
As an accident, we lost the ability to limit the number of frames in
the backtrace. We could add that back, but personally I always want
*all* frames in the trace... Narrowing still works fine, though there
are some hiccups sometimes -- e.g. an outer cut to a procedure that
does a tail-call in VM code will never find the cut, as it no longer
exists in the continuation.
* libguile/vm.h (struct scm_vm): So! Now that we have switched to save
stacks in the normal make-stack, there's no more need for `this_frame'
or `last_frame'. On the other hand, we can take this opportunity to fix
tracing: when we're in a trace hook, we set `trace_frame' on the VM,
so we know not to fire hooks when we're already in a hook.
(struct scm_vm_cont): Expose this, as make-stack needs it to make VM
frames from VM continuations.
* libguile/vm.c (scm_vm_trace_frame): New function, gets the current
trace frame.
(vm_mark, make_vm): Hook up the trace frame.
(vm_dispatch_hook): New hook dispatcher, with a dynwind so it does the
right thing if the hook exits nonlocally.
* libguile/vm-engine.c (vm_run): No more this_frame in the wind data.
* libguile/vm-engine.h (RUN_HOOK): Run hooks through the dispatcher.
(ALIGN_AS_NON_IMMEDIATE, POP_LIST_ON_STACK): Remove unused code.
(NEW_FRAME): Adapt for no HL in the frame.
* libguile/vm-i-system.c (goto/args, mv-call, return, return/values):
Adapt for no HL in the frame.
* module/system/vm/frame.scm:
* module/system/vm/vm.scm: Beginnings of some reworkings, needs more
thought.
* libguile/vm-i-system.c (return/values): In the
multiple-values-to-a-single-value-continuation (or MV but where N=1),
null out the correct number of values from the stack. Fixes aborts on
(apply values '(1)).
* testsuite/t-values.scm (call-with-values): Add a test.
* libguile/vm-i-system.c (call, goto/args): Handle the case in which a
non-program (i.e. interpreted program or a subr) returns multiple
values.
* testsuite/t-values.scm: Add test case that exhibited this problem.
* ice-9/boot-9.scm (compile-time-environment): Remove definition from
boot-9 -- instead, autoload it and `compile' from (system base
compile).
* libguile/objcodes.h:
* libguile/objcodes.c (scm_objcode_to_program): Add an optional argument,
`external', the external list to set on the returned program.
* libguile/vm-i-system.c (externals): New instruction, returns the
external list. Only used by (compile-time-environment).
* libguile/vm.c (scm_load_compiled_with_vm): Adapt to
scm_objcode_to_program change.
* module/language/scheme/translate.scm (translate): Actually pay
attention to the environment passed as an argument.
(custom-transformer-table): Expand out (compile-time-environment) to
something that can be passed to `compile'.
* module/system/base/compile.scm (*current-language*): Instead of
hard-coding `scheme' in various places, use a current language fluid,
initialized to `scheme'.
(compile-file, load-source-file): Adapt to *current-language*.
(load-source-file): Ada
(scheme-eval): Removed, no one used this.
(compiled-file-name): Don't hard-code "scm" and "go"; instead use the
%load-extensions and %load-compiled-extensions.
(cenv-module, cenv-ghil-env, cenv-externals): Some accessors for
compile-time environments.
(compile-time-environment): Here we define (compile-time-environment)
to something that will return #f; the compiler however produces
different code as noted above.
(compile): New function, compiles an expression into a thunk, then runs
the thunk to get the value. Useful for procedures. The optional second
argument can be either a module or a compile-time-environment; in the
latter case, we can recompile even with lexical bindings.
(compile-in): If the env specifies a module, set that module for the
duration of the compilation.
* module/system/base/syntax.scm (%compute-initargs): Fix a bug where the
default value for a field would always replace a user-supplied value.
Whoops.
* module/system/il/ghil.scm (ghil-env-dereify): New function, takes the
result of ghil-env-reify and turns it back into a GHIL environment.
* scripts/compile (compile): Remove some of the tricky error handling, as
the library procedures handle this for us.
* test-suite/tests/compiler.test: Add a test for the dynamic compilation
bits.
* gdbinit (pp, inst): New commands.
* libguile/vm-engine.c (vm_error_not_a_pair): New error case.
* libguile/vm-i-scheme.c (VM_VALIDATE_CONS): New macro -- use this
instead of SCM_VALIDATE_* because SCM_VALIDATE will exit nonlocally
before we have a chance to sync the regs.
(car, cdr, set-car, set-cdr): Use VM_VALIDATE_CONS.
* libguile/vm-i-system.c (goto/args): Bugfix: when doing a
self-tail-recursion, allocate fresh externals. Fixes use of match.go.
* module/system/vm/assemble.scm (dump-object!): Add some checks that we
aren't dumping out values that the VM can't handle.
* module/system/vm/disasm.scm (disassemble-externals): Fix rotten call to
`print-info'.
* oop/goops/dispatch.scm: Add a FIXME.
* testsuite/Makefile.am (vm_test_files):
* testsuite/t-closure4.scm (extract-symbols): New test, distilled with
much effort out of match.scm.
* ice-9/Makefile.am (NOCOMP_SOURCES): Re-enable compilation of match.scm.
Yay!
I saw this problem when running elisp.test -- it tries to apply a
function to an arglist ending in nil, which obviously is not null.
* libguile/vm-engine.h (PUSH_LIST): New helper macro, pushes the elements
of a list onto the stack. Checks to make sure that the list is proper.
* libguile/vm-i-system.c (list-break, mv-call, apply, goto/apply)
(goto/cc): Use LIST_BREAK.
* libguile/vm-engine.c (vm_error_improper_list): New error case.
* libguile/vm-i-system.c (goto/args): Sync the registers before doing the
SCM_TICK. We probably need a different SCM_TICK that saves the regs
only if necessary. This fixes GC problems with a compiled popen.scm.
* ice-9/Makefile.am: Re-enable popen.scm compilation.
* libguile/vm-i-system.c (call/cc, goto/cc): Don't assert that ip matches
vp->ip, because vp->ip is not restored by vm_reset_stack, and indeed
it's re-set to 0 by `halt'. But still, perhaps reset_stack and halt
should indeed reset vp->ip.
* libguile/vm-i-system.c (goto/cc): Add some asserts here.
* libguile/vm.c (capture_vm_cont): Add some asserts here too.
(reinstate_vm_cont): Null the correct number of bytes. Add a FIXME.
(vm_reset_stack): Make the code a bit clearer. Null the correct number
of bytes.
* libguile/vm-engine.h (NULLSTACK_FOR_NONLOCAL_EXIT): New macro, handles
a very tricky case that took me days to find! Amply commented. Expands
to nothing in the normal case.
* libguile/vm-i-system.c (call, goto/args, mv-call): Call
NULLSTACK_FOR_NONLOCAL_EXIT in the right places. Fixes
continuations.test.
* libguile/vm-engine.h (CHECK_STACK_LEAK, NULLSTACK): Add a new mode,
VM_ENABLE_STACK_NULLING, that tries to ensure that all stack data past
the top of the stack is NULL. This helps to verify the VM's
consistency. If VM_ENABLE_STACK_NULLING is not defined, there is no
overhead.
(DROP, DROPN): Hook into NULLSTACK.
(POP_LIST): Hoo, fix a good bug: if CONS triggered a GC, the elements
of the list that had not yet been consed would not be marked, because
the sp was already below them.
(NEXT): Hook into CHECK_STACK_LEAK.
(INIT_ARGS): Add a note that consing the rest arg can cause GC.
(NEW_FRAME): Cons up the external data after initializing the frame, so
that if GC is triggered, the precise marker sees a well-formed frame.
* libguile/vm-i-loader.c (load-program): In the four-integers case, use
the POP macro so that we can hook into NULLSTACK (if necessary).
* libguile/vm-i-scheme.c (ARGS2, ARGS3): Hook into NULLSTACK.
* libguile/vm-i-system.c (halt): Null the nvalues. Rework some asserts
into using ASSERT, and null the stack when we free the frame.
(variable-set): Use DROPN instead of sp -= 2.
(BR): Hook into NULLSTACK.
(goto/args): Hook into NULLSTACK. In the non-self case, delay updating
the frame until after INIT_ARGS so that GC sees a well-formed frame.
Delay consing the externals until after the frame is set up, as in
NEW_FRAME.
(call/cc): Add some asserts.
(return): Rework some asserts into ASSERT, and hook into NULLSTACK.
(return/values): Hook into NULLSTACK, and use ASSERT.
(return/values*) Use ASSERT.
* libguile/vm.c (VM_ENABLE_ASSERTIONS, VM_ENABLE_STACK_NULLING): These
are the variables that control assertions and nulling. Perhaps we can
do these per-engine when we start compiling the debug engine separate
from a speedy engine.
(vm_mark_stack): Add a precise stack marker. Yay!
(vm_cont_mark): Mark the continuation stack precisely.
(capture_vm_cont): Record the difference from the vp's stack_base too,
so that we can translate the dynamic links when marking the
continuation stack. Memset the stack to NULL if we are doing nulling.
(reinstate_vm_cont): If we are nulling, null out the relevant part
of the stack.
(vm_reset_stack): When resetting sp due to a nonlocal exit, null out
the stack too.
(vm_mark): If we are nulling, assert that there are no extra values on
the stack. Mark the stack precisely.
* libguile/vm-engine.c: Call scm_wrong_num_args in the wrong-num-args
case, to be more like the interpreter.
* libguile/vm-engine.h (ASSERT): New macro.
* libguile/vm-i-system.c (apply, goto/apply): Assert that nargs >= 2,
because the compiler should always feed us correct instructions.
(call/cc): If no values are returned to the continuation, signal
no_values instead of wrong_num_args.
* libguile/vm-engine.h (POP_CONS_MARK): New macro, analagous to
POP_LIST_MARK; used in quasiquote on improper lists.
* libguile/vm-i-system.c (cons-mark): New instruction. You know the
drill, remove all your .go files please.
* module/system/il/compile.scm (codegen): Compile quasiquoted improper
lists with splices correctly. Additionally check that we don't have
slices in the CDR of an improper list.
* testsuite/t-quasiquote.scm: Add a test for unquote-splicing in improper
lists.
* gdbinit: Update to be a bit more useful.
* libguile/vm-i-system.c: Make sure that arguments to C procedures are
visible on the stack so they get marked. Could be a source for the
missed references.
* libguile/vm-engine.c (vm_run): Add new error case for resolving @ or @@
references, but there is no such module. Possible if
module-public-interface returns #f.
* libguile/vm-i-loader.c (link-now): Allow the stack arg to be a sym, as
before, or a list, indicating an absolute reference. Could be two
separate instructions, but I'm lazy.
* libguile/vm-i-system.c (late-variable-ref, late-variable-set): As in
link-now, allow the lazy reference to be a list, for @ and @@.
* module/language/scheme/translate.scm (custom-transformer-table):
Compile @ and @@, and set! forms for both of them. This will ease the
non-hygienic pain for exported macros.
* module/system/il/compile.scm (make-glil-var): Translate public and
private module variable references into glil-module variables.
* module/system/il/ghil.scm (ghil-var-at-module!): New function, resolves
a variable for @ or @@.
* module/system/il/glil.scm (<glil-module>): Revival of <glil-module>,
this time with the semantics that it really links to a particular
module.
* module/system/vm/assemble.scm (<vlink-now>, <vlink-later>): Redefine as
taking a "key" as the argument, which may be a sym or a list; see the
notes on link-now for more details.
(codegen): Compile <glil-module> appropriately. Some duplication here,
probably could use some cleanup later.
* libguile/programs.c (scm_c_make_closure): If the program is actually
not a program, abort. This can happen if GC misses a reference, as
currently seems to happen.
* libguile/vm.c (vm_mark): Revert part of
7ff017002d, which changed the call to
scm_mark_locations. I'm 99% *sure* this is wrong, but it seems to
prevent missed references when recompiling the .go files in guile
itself. Needs revisiting soon, but for the time being we can go back to
where we were a couple of days ago.
* libguile/vm-i-system.c (halt, vector, vector-mark): Sync the registers
before calling into C, as it may GC.
* libguile/vm-i-system.c (call, goto/args): Add a FIXME for handling the
case in which a call to the interpreter returns a values object.
(call/cc, goto/cc): Flesh out, and handle full continuations (with the
C stack also).
* module/language/scheme/translate.scm (custom-transformer-table):
Compile call-with-current-continuation. This is necessary so that the
called procedure is called in tail position.
* module/system/il/compile.scm (codegen): Translate apply to goto/apply,
call/cc to goto/cc, etc when in tail position.
* libguile/vm-engine.c (vm_run): Add new error case,
vm_error_not_enough_values.
* libguile/vm-i-system.c (goto/nargs, call/nargs): So, in these cases, if
we get too many values, we don't truncate the values like we do in the
single-value continuation case, or in the mvbind case. What to do? I
guess we either truncate them here, or only allow the correct number of
values. Dunno. Mark the code as a fixme.
(truncate-values): New instruction, for mv-bind: checks that the number
of values on the stack is compatible with the number of bindings we
have arranged for them, truncating if necessary.
* module/language/scheme/translate.scm (custom-transformer-table):
Compile receive as a primary form -- not so much because it is a
primary form, but more to test the mv-bind machinery. Also it's more
efficient, I think.
* module/system/il/compile.scm (lift-variables!): New helper, factored
out of `optimize'.
(optimize): Add a few more cases. Adapt `lambda' optimization, which
isn't much. I'm not happy with ghil as a mungeable language.
Add a case for call-with-values with the second argument is
a lambda: lift the lambda. Untested.
(codegen): Refactor the push-bindings! code. Compile mv-bind.
* module/system/il/ghil.scm (<ghil-mv-bind>): Add mv-bind construct,
along with its procedures.
* module/system/il/glil.scm (<glil-mv-bind>): Add mv-bind construct,
different from the high-level one. It makes sense in the source, I
think.
* module/system/vm/assemble.scm (codegen): Assemble glil-mv-bind by
pushing onto the bindings list, and actually push some code to truncate
the values.
* libguile/vm-engine.c (vm_run): Add another byte onto the bootstrap
program, as the offset passed to mv-call now takes two bytes.
* module/system/vm/frame.scm (bootstrap-frame?): Update for the new
bootstrap length. Really we should just check for 'halt though.
* libguile/vm-i-system.c (FETCH_OFFSET): New helper, used in BR().
(goto/nargs, call/nargs): Versions of goto/args and call, respectively,
that take the number of arguments from a value on the top of the stack.
(mv-call): Call FETCH_OFFSET to get the offset.
* module/language/scheme/translate.scm (custom-transformer-table):
Compile call-with-values to <ghil-mv-call>. There is some trickery
because of the r4rs.scm call-with-values trampolines.
* module/system/il/ghil.scm: Add <ghil-mv-call> and accessors.
* module/system/il/compile.scm (codegen): Compile <ghil-mv-call>.
* module/system/il/glil.scm: Add <glil-mv-call>, which needs some special
assembly because of the label. Fix some typos.
* module/system/vm/assemble.scm (byte-length): New helper, factored out
and made more general.
(codegen): Assemble mv-call, including the label.
(check-length): New helper, makes sure that the addressing is
consistent within the produced object code.
(stack->bytes): Rewrite to be more generic -- now `br' instructions
aren't the only ones jumping around in the instruction stream.
* module/system/vm/conv.scm (make-byte-decoder): Return two values in the
#f case.
* module/system/vm/disasm.scm (disassemble-bytecode): Rewrite, because
the previous implementation depended on a guile interpreter quirk:
namely, that multiple values could be represented within one value, and
destructured later.
* libguile/vm-engine.c (vm_run): Move nvalues to the top level, to avoid
(spurious, it seems) gcc warnings about it being used uninitialized.
* libguile/vm-i-system.c (halt, return/values): Adapt to gcc silliness.
Deindent some of return/values.
(return/values*): New instruction, does what (apply values . args)
would do.
* module/language/scheme/translate.scm (custom-transformer-table): Move
the apply and @apply cases here from inline.scm, because we need some
more cleverness when dealing with cases like (apply values . args).
(lookup-apply-transformer): Define an eval transformer for `values',
turning it into ghil-values*.
* module/system/il/compile.scm (codegen): Compile <ghil-values*> into
return/values*.
* module/system/il/ghil.scm: Add <ghil-values*> and accessors.
(ghil-lookup): Add optional argument, define?, which if false tells us
not to actually cache the binding if it is not found in the toplevel.
* module/system/il/inline.scm: Remove apply clauses.
* module/system/vm/frame.scm (bootstrap-frame?): Update heuristic for
bootstrap-frame?, as the bootstrap frame is now 5 bytes since it
accepts multiple values.
* libguile/vm-engine.c (vm_run): The bootstrap program now uses mv_call,
so as to allow multiple values out of the VM. (It did before, because
multiple values were represented internally as single scm_values
objects, but now that values go on the stack, we need to note the boot
frame as accepting multiple values.)
(vm_error_no_values): New error, happens if you pass no values into a
single-value continuation. Passing more than one is OK though, it just
takes the first one.
* libguile/vm-i-system.c (halt): Assume that someone has pushed the
number of values onto the stack, and package up that number of values
as a scm_values() object, for communication with the interpreter.
(mv-call): New instruction, calls a procedure with a multiple-value
continuation, even handling calls out to the interpreter.
(return/values): New instruction, returns multiple values to the
continuation. If the continuation is single-valued, takes the first
value or errors if there are no values. Otherwise it returns to the
multiple-value return address, pushing the number of values on top of
the values.
* module/system/il/compile.scm (codegen): Compile <ghil-values> forms.
* module/system/il/ghil.scm (<ghil-values>) Add new GHIL data structure
and associated procedures.
* module/language/scheme/translate.scm (custom-transformer-table):
Compile (values .. ) forms into <ghil-values>.
* libguile/vm-i-system.c (call): Rename continuation invocation from
`vm_call_cc' to `vm_call_continuation', because that's what it really
does. Add a note that it doesn't handle multiple values at the moment.
(goto/arg): Renamed from tail-call, in deference to the progenitors, on
Dale Smith's suggestion.
(goto/apply): New instruction, for `apply' in a tail context. Not yet
used, or vetted for that matter.
(call/cc): No need to pop the program, I don't think; although this
isn't tested either.
(goto/cc): New instruction, for call/cc in a tail context.
* module/language/scheme/translate.scm (*forbidden-primitives*): Rename
from %forbidden-primitives.
* module/system/il/compile.scm (codegen): Adapt to goto/args instead of
tail-call.
* module/system/il/inline.scm: Start inlining some macros used in
r4rs.scm -- not yet fully tested.
* ice-9/boot-9.scm: Allow load of a compiled r4rs file.
* libguile/frames.c (frame-mv-return-address): New accessor.
* libguile/frames.h: Update frame diagram.
(SCM_FRAME_UPPER_ADDRESS): Update for data area
growing by one pointer.
(SCM_FRAME_MV_RETURN_ADDRESS): New macro.
* libguile/vm-engine.h (NEW_FRAME): Update for frame getting bigger by a
pointer. In a normal NEW_FRAME, set the MV return address to NULL, to
indicate that this continuation does not accept multiple values.
* libguile/vm-i-system.c (tail-call): Update frame replacement code to
understand the MV return address.
(return): Make room for the MVRA.
* libguile/programs.c (program_print): Only try to lookup write-program
if the module system is booted.
* libguile/vm-engine.h (FREE_FRAME): Remove, it's now inlined everywhere.
* libguile/vm-i-system.c (tail-call): Inline FREE_FRAME, and implement
the calling bits here. Will make things more hackable.
* libguile/programs.h (struct scm_program):
* libguile/programs.c (scm_c_make_program): Record the current module
when making a program. This replaces the per-late binding recorded
module in the generated code, which should be more efficient, both in
terms of garbage, and in not calling resolve-module.
(program-module): New accessor.
* module/system/vm/program.scm: Add program-module to exports.
* libguile/vm-i-loader.c (link-later): Remove this instruction, since now
the entry in the object table is just a symbol, and can be loaded with
load-symbol.
* libguile/vm-i-system.c (late-variable-ref, late-variable-set): Rework
so as to look up in the module of the current program. The logic could
be condensed quite a bit if scm_module_lookup () knew what to do with
mod==#f.
* module/system/vm/assemble.scm (dump-object!): Dump <vlink-later> just
as load-symbol, as mentioned in the note on link-later.
* module/system/il/ghil.scm: Update comment to reflect the new reality.
* libguile/vm-i-system.c (late-variable-ref, late-variable-set): If the
module system isn't booted, do a simple scm_lookup. In the -ref case,
actually cache the variable location (doh!).
* ice-9/boot-9.scm: Only define load-compiled as #f if it's not already
defined, which won't normally be the case.
* libguile/guile-vm.c: Removed, there's no more guile-vm binary.
* libguile/frames.c: (with change frame? -> heap-frame?)
* libguile/frames.h:
* libguile/instructions.c:
* libguile/instructions.h:
* libguile/objcodes.c:
* libguile/objcodes.h:
* libguile/programs.c:
* libguile/programs.h:
* libguile/vm-bootstrap.h: (was bootstrap.h)
* libguile/vm-engine.c: (was vm_engine.c)
* libguile/vm-engine.h: (was vm_engine.h)
* libguile/vm-expand.h: (was vm_expand.h)
* libguile/vm-i-loader.c: (was vm_loader.c)
* libguile/vm-i-scheme.c: (was vm_scheme.c)
* libguile/vm-i-system.c: (was vm_system.c)
* libguile/vm.c:
* libguile/vm.h: These files moved here from src/, as guile-vm is now a
part of libguile.
* libguile/init.c: Bootstrap the VM. Yay!
* libguile/Makefile.am: The necessary chicanery here.
* module/system/vm/Makefile.am:
* module/system/vm/bootstrap.scm:
* module/system/vm/frame.scm:
* module/system/vm/instruction.scm:
* module/system/vm/objcode.scm:
* module/system/vm/program.scm:
* module/system/vm/vm.scm:
* pre-inst-guile-env.in: Add builddirs to the load path; add module/ to
the path in the empty-$GUILE_LOAD_PATH case as well.
* src/Makefile.am: Moved out everything except guilec and guile-disasm,
which probably should be moved to the scripts directory?
* testsuite/Makefile.am: Update to find guile-vm in the right place.
* module/system/vm/Makefile.am:
* module/system/vm/bootstrap.scm: Removed bootstrap.scm, scm_init_guile
handles the bootstrapping for us.
* module/system/vm/frame.scm:
* module/system/vm/instruction.scm:
* module/system/vm/objcode.scm:
* module/system/vm/program.scm:
* module/system/vm/vm.scm: Call the init functions in libguile; should
fix at some point to avoid the dlopen?
