guile/doc/gh.texi

@page
@node GH
@chapter GH: A Portable C to Scheme Interface
@cindex libguile - gh
@cindex gh
@cindex gh - reference manual

The Guile interpreter is based on Aubrey Jaffer's @emph{SCM} interpreter
(@pxref{Overview, SCM: a portable Scheme interpreter, Overview, scm,
SCM: a portable Scheme interpreter}) with some modifications to make it
suitable as an embedded interpreter, and further modifications as Guile
evolves.
@cindex SCM interpreter
@cindex Jaffer, Aubrey

Part of the modification has been to provide a restricted interface to
limit access to the SCM internals; this is called the @code{gh_}
interface, or @emph{libguile} interface.
@cindex gh_ interface
@cindex libguile interface

If you are @emph{programming with Guile}, you should only use the C
subroutines described in this manual, which all begin with
@code{gh_}.

If instead you are @emph{extending Guile}, you have the entire SCM
source to play with.  This manual will not help you at all, but you can
consult Aubrey Jaffer's SCM manual (@pxref{Internals, SCM: a portable
Scheme interpreter, Internals, scm, SCM: a portable Scheme
interpreter}).
@cindex Guile - extending
@cindex extending Guile
@cindex SCM internals

If you are @emph{adding a module to Guile}, I recommend that you stick
to the @code{gh_} interface: this interface is guaranteed to not
change drastically, while the SCM internals might change as Guile is
developed.


@menu
* gh preliminaries::            
* Data types and constants defined by gh::  
* Starting and controlling the interpreter::  
* Error messages::              
* Executing Scheme code::       
* Defining new Scheme procedures in C::  
* Converting data between C and Scheme::  
* Type predicates::             
* Equality predicates::         
* Memory allocation and garbage collection::  
* Calling Scheme procedures from C::  
* Mixing gh and scm APIs::      
@end menu


@node gh preliminaries
@section gh preliminaries

To use gh, you must have the following toward the beginning of your C
source:
@smallexample
#include <guile/gh.h>
@end smallexample
@cindex gh - headers

When you link, you will have to add at least @code{-lguile} to the list
of libraries.  If you are using more of Guile than the basic Scheme
interpreter, you will have to add more libraries.
@cindex gh - linking


@node Data types and constants defined by gh
@section Data types and constants defined by gh
@cindex libguile - data types

The following C constants and data types are defined in gh:

@deftp {Data type} SCM
This is a C data type used to store all Scheme data, no matter what the
Scheme type.  Values are converted between C data types and the SCM type
with utility functions described below (@pxref{Converting data between C
and Scheme}).  [FIXME: put in references to Jim's essay and so forth.]
@end deftp
@cindex SCM data type

@defvr Constant SCM_BOOL_T
@defvrx Constant SCM_BOOL_F
The @emph{Scheme} values returned by many boolean procedures in
libguile.

This can cause confusion because they are different from 0 and 1.  In
testing a boolean function in libguile programming, you must always make
sure that you check the spec: @code{gh_} and @code{scm_} functions will
usually return @code{SCM_BOOL_T} and @code{SCM_BOOL_F}, but other C
functions usually can be tested against 0 and 1, so programmers' fingers
tend to just type @code{if (boolean_function()) @{ ... @}}
@end defvr

@defvr Constant SCM_UNSPECIFIED
This is an SCM object which does not correspond to any legal Scheme
value.  It can be used in C to terminate functions with variable numbers
of arguments, such as @code{gh_list()}.
@end defvr


@node Starting and controlling the interpreter
@section Starting and controlling the interpreter
@cindex libguile - start interpreter

In almost every case, your first @code{gh_} call will be:

@deftypefun void gh_enter (int @var{argc}, char *@var{argv}[], void (*@var{main_prog})())
Starts up a Scheme interpreter with all the builtin Scheme primitives.
@code{gh_enter()} never exits, and the user's code should all be in the
@code{@var{main_prog}()} function.  @code{argc} and @code{argv} will be
passed to @var{main_prog}.

@deftypefun void main_prog (int @var{argc}, char *@var{argv}[])
This is the user's main program.  It will be invoked by
@code{gh_enter()} after Guile has been started up.
@end deftypefun

Note that you can use @code{gh_repl} inside @code{gh_enter} (in other
words, inside the code for @code{main-prog}) if you want the program to
be controled by a Scheme read-eval-print loop.
@end deftypefun

@cindex read eval print loop -- from the gh_ interface
@cindex REPL -- from the gh_ interface
A convenience routine which enters the Guile interpreter with the
standard Guile read-eval-print loop (@dfn{REPL}) is:

@deftypefun void gh_repl (int @var{argc}, char *@var{argv}[])
Enters the Scheme interpreter giving control to the Scheme REPL.
Arguments are processed as if the Guile program @file{guile} were being
invoked.

Note that @code{gh_repl} should be used @emph{inside} @code{gh_enter},
since any Guile interpreter calls are meaningless unless they happen in
the context of the interpreter.

Also note that when you use @code{gh_repl}, your program will be
controlled by Guile's REPL (which is written in Scheme and has many
useful features).  Use straight C code inside @code{gh_enter} if you
want to maintain execution control in your C program.
@end deftypefun

You will typically use @code{gh_enter} and @code{gh_repl} when you
want a Guile interpreter enhanced by your own libraries, but otherwise
quite normal.  For example, to build a Guile--derived program that
includes some random number routines @dfn{GSL} (GNU Scientific Library),
you would write a C program that looks like this:

@smallexample
#include <guile/gh.h>
#include <gsl_ran.h>

/* random number suite */
SCM gw_ran_seed(SCM s)
@{
  gsl_ran_seed(gh_scm2int(s));
  return SCM_UNSPECIFIED;
@}

SCM gw_ran_random()
@{
  SCM x;

  x = gh_ulong2scm(gsl_ran_random());
  return x;
@}

SCM gw_ran_uniform()
@{
  SCM x;

  x = gh_double2scm(gsl_ran_uniform());
  return x;
@}
SCM gw_ran_max()
@{
  return gh_double2scm(gsl_ran_max());
@}

void
init_gsl()
@{
  /* random number suite */
  gh_new_procedure("gsl-ran-seed", gw_ran_seed, 1, 0, 0);
  gh_new_procedure("gsl-ran-random", gw_ran_random, 0, 0, 0);
  gh_new_procedure("gsl-ran-uniform", gw_ran_uniform, 0, 0, 0);
  gh_new_procedure("gsl-ran-max", gw_ran_max, 0, 0, 0);
@}

void
main_prog (int argc, char *argv[])
@{
  init_gsl();

  gh_repl(argc, argv);
@}

int
main (int argc, char *argv[])
@{
  gh_enter (argc, argv, main_prog);
@}
@end smallexample

Then, supposing the C program is in @file{guile-gsl.c}, you could
compile it with @kbd{gcc -o guile-gsl guile-gsl.c -lguile -lgsl}.

The resulting program @file{guile-gsl} would have new primitive
procedures @code{gsl-ran-random}, @code{gsl-ran-gaussian} and so forth.


@node Error messages
@section Error messages
@cindex libguile - error messages
@cindex error messages in libguile

[FIXME: need to fill this based on Jim's new mechanism]


@node Executing Scheme code
@section Executing Scheme code
@cindex libguile - executing Scheme
@cindex executing Scheme

Once you have an interpreter running, you can ask it to evaluate Scheme
code.  There are two calls that implement this:

@deftypefun SCM gh_eval_str (char *@var{scheme_code})
This asks the interpreter to evaluate a single string of Scheme code,
and returns the result of the last expression evaluated.

Note that the line of code in @var{scheme_code} must be a well formed
Scheme expression.  If you have many lines of code before you balance
parentheses, you must either concatenate them into one string, or use
@code{gh_eval_file()}.
@end deftypefun

@deftypefun SCM gh_eval_file (char *@var{fname})
@deftypefunx SCM gh_load (char *@var{fname})
@code{gh_eval_file} is completely analogous to @code{gh_eval_str()},
except that a whole file is evaluated instead of a string.  Returns the
result of the last expression evaluated.

@code{gh_load} is identical to @code{gh_eval_file} (it's a macro that
calls @code{gh_eval_file} on its argument).  It is provided to start
making the @code{gh_} interface match the R4RS Scheme procedures
closely.
@end deftypefun


@node Defining new Scheme procedures in C
@section Defining new Scheme procedures in C
@cindex libguile - new procedures
@cindex new procedures
@cindex procedures, new
@cindex new primitives
@cindex primitives, new

The real interface between C and Scheme comes when you can write new
Scheme procedures in C.  This is done through the routine


@deftypefn {Libguile high} SCM gh_new_procedure (char *@var{proc_name}, SCM (*@var{fn})(), int @var{n_required_args}, int @var{n_optional_args}, int @var{restp})
@code{gh_new_procedure} defines a new Scheme procedure.  Its Scheme name
will be @var{proc_name}, it will be implemented by the C function
(*@var{fn})(), it will take at least @var{n_required_args} arguments,
and at most @var{n_optional_args} extra arguments.

When the @var{restp} parameter is 1, the procedure takes a final
argument: a list of remaining parameters.

@code{gh_new_procedure} returns an SCM value representing the procedure.

The C function @var{fn} should have the form
@deftypefn {Libguile high} SCM fn (SCM @var{req1}, SCM @var{req2}, ..., SCM @var{opt1},  SCM @var{opt2}, ...,  SCM @var{rest_args})
The arguments are all passed as SCM values, so the user will have to use
the conversion functions to convert to standard C types.

Examples of C functions used as new Scheme primitives can be found in
the sample programs @code{learn0} and @code{learn1}.
@end deftypefn

@end deftypefn

@strong{Rationale:} this is the correct way to define new Scheme
procedures in C.  The ugly mess of arguments is required because of how
C handles procedures with variable numbers of arguments.

@strong{Note:} what about documentation strings?

@cartouche
There are several important considerations to be made when writing the C
routine @code{(*fn)()}.

First of all the C routine has to return type @code{SCM}.

Second, all arguments passed to the C funcion will be of type
@code{SCM}.

Third: the C routine is now subject to Scheme flow control, which means
that it could be interrupted at any point, and then reentered.  This
means that you have to be very careful with operations such as
allocating memory, modifying static data @dots{}

Fourth: to get around the latter issue, you can use
@code{GH_DEFER_INTS} and @code{GH_ALLOW_INTS}.
@end cartouche

@defmac GH_DEFER_INTS
@defmacx GH_ALLOW_INTS
These macros disable and reenable Scheme's flow control.  They 
@end defmac


@c [??? have to do this right; maybe using subsections, or maybe creating a
@c section called Flow control issues...]

@c [??? Go into exhaustive detail with examples of the various possible
@c combinations of required and optional args...]


@node Converting data between C and Scheme
@section Converting data between C and Scheme
@cindex libguile - converting data
@cindex data conversion
@cindex converting data

Guile provides mechanisms to convert data between C and Scheme.  This
allows new builtin procedures to understand their arguments (which are
of type @code{SCM}) and return values of type @code{SCM}.


@menu
* C to Scheme::                 
* Scheme to C::                 
@end menu

@node C to Scheme
@subsection C to Scheme

@deftypefun SCM gh_bool2scm (int @var{x})
Returns @code{#f} if @var{x} is zero, @code{#t} otherwise.
@end deftypefun

@deftypefun SCM gh_ulong2scm (unsigned long @var{x})
@deftypefunx SCM gh_long2scm (long @var{x})
@deftypefunx SCM gh_double2scm (double @var{x})
@deftypefunx SCM gh_char2scm (char @var{x})
Returns a Scheme object with the value of the C quantity @var{x}.
@end deftypefun

@deftypefun SCM gh_str2scm (char *@var{s}, int @var{len})
Returns a new Scheme string with the (not necessarily null-terminated) C
array @var{s} data.
@end deftypefun

@deftypefun SCM gh_str02scm (char *@var{s})
Returns a new Scheme string with the null-terminated C string @var{s}
data.
@end deftypefun

@deftypefun SCM gh_set_substr (char *@var{src}, SCM @var{dst}, int @var{start}, int @var{len})
Copy @var{len} characters at @var{src} into the @emph{existing} Scheme
string @var{dst}, starting at @var{start}.  @var{start} is an index into
@var{dst}; zero means the beginning of the string.

If @var{start} + @var{len} is off the end of @var{dst}, signal an
out-of-range error.
@end deftypefun

@deftypefun SCM gh_symbol2scm (char *@var{name})
Given a null-terminated string @var{name}, return the symbol with that
name.
@end deftypefun

@deftypefun SCM gh_ints2scm (int *@var{dptr}, int @var{n})
@deftypefunx SCM gh_doubles2scm (double *@var{dptr}, int @var{n})
Make a scheme vector containing the @var{n} ints or doubles at memory
location @var{dptr}.
@end deftypefun

@deftypefun SCM gh_chars2byvect (char *@var{dptr}, int @var{n})
@deftypefunx SCM gh_shorts2svect (short *@var{dptr}, int @var{n})
@deftypefunx SCM gh_longs2ivect (long *@var{dptr}, int @var{n})
@deftypefunx SCM gh_ulongs2uvect (ulong *@var{dptr}, int @var{n})
@deftypefunx SCM gh_floats2fvect (float *@var{dptr}, int @var{n})
@deftypefunx SCM gh_doubles2dvect (double *@var{dptr}, int @var{n})
Make a scheme uniform vector containing the @var{n} chars, shorts,
longs, unsigned longs, floats or doubles at memory location @var{dptr}.
@end deftypefun



@node Scheme to C
@subsection Scheme to C

@deftypefun int gh_scm2bool (SCM @var{obj})
@deftypefunx {unsigned long} gh_scm2ulong (SCM @var{obj})
@deftypefunx long gh_scm2long (SCM @var{obj})
@deftypefunx double gh_scm2double (SCM @var{obj})
@deftypefunx int gh_scm2char (SCM @var{obj})
These routines convert the Scheme object to the given C type.
@end deftypefun

@deftypefun char *gh_scm2newstr (SCM @var{str}, int *@var{lenp})
Given a Scheme string @var{str}, return a pointer to a new copy of its
contents, followed by a null byte.  If @var{lenp} is non-null, set
@code{*@var{lenp}} to the string's length.

This function uses malloc to obtain storage for the copy; the caller is
responsible for freeing it.

Note that Scheme strings may contain arbitrary data, including null
characters.  This means that null termination is not a reliable way to
determine the length of the returned value.  However, the function
always copies the complete contents of @var{str}, and sets @var{*lenp}
to the true length of the string (when @var{lenp} is non-null).
@end deftypefun


@deftypefun void gh_get_substr (SCM str, char *return_str, int *lenp)
Copy @var{len} characters at @var{start} from the Scheme string
@var{src} to memory at @var{dst}.  @var{start} is an index into
@var{src}; zero means the beginning of the string.  @var{dst} has
already been allocated by the caller.

If @var{start} + @var{len} is off the end of @var{src}, signal an
out-of-range error.
@end deftypefun

@deftypefun char *gh_symbol2newstr (SCM @var{sym}, int *@var{lenp})
Takes a Scheme symbol and returns a string of the form
@code{"'symbol-name"}.  If @var{lenp} is non-null, the string's length
is returned in @code{*@var{lenp}}.

This function uses malloc to obtain storage for the returned string; the
caller is responsible for freeing it.
@end deftypefun

@deftypefun char *gh_scm2chars (SCM @var{vector}, chars *@var{result})
@deftypefunx short *gh_scm2shorts (SCM @var{vector}, short *@var{result})
@deftypefunx long *gh_scm2longs (SCM @var{vector}, long *@var{result})
@deftypefunx float *gh_scm2floats (SCM @var{vector}, float *@var{result})
@deftypefunx double *gh_scm2doubles (SCM @var{vector}, double *@var{result})
Copy the numbers in @var{vector} to the array pointed to by @var{result}
and return it.  If @var{result} is NULL, allocate a double array large
enough.

@var{vector} can be an ordinary vector, a weak vector, or a signed or
unsigned uniform vector of the same type as the result array.  For
chars, @var{vector} can be a string or substring.  For floats and
doubles, @var{vector} can contain a mix of inexact and integer values.

If @var{vector} is of unsigned type and contains values too large to fit
in the signed destination array, those values will be wrapped around,
that is, data will be copied as if the destination array was unsigned.
@end deftypefun


@node Type predicates
@section Type predicates

These C functions mirror Scheme's type predicate procedures with one
important difference.  The C routines return C boolean values (0 and 1)
instead of @code{SCM_BOOL_T} and @code{SCM_BOOL_F}.

The Scheme notational convention of putting a @code{?} at the end of
predicate procedure names is mirrored in C by placing @code{_p} at the
end of the procedure.  For example, @code{(pair? ...)} maps to
@code{gh_pair_p(...)}.

@deftypefun int gh_boolean_p (SCM @var{val})
Returns 1 if @var{val} is a boolean, 0 otherwise.
@end deftypefun

@deftypefun int gh_symbol_p (SCM @var{val})
Returns 1 if @var{val} is a symbol, 0 otherwise.
@end deftypefun

@deftypefun int gh_char_p (SCM @var{val})
Returns 1 if @var{val} is a char, 0 otherwise.
@end deftypefun

@deftypefun int gh_vector_p (SCM @var{val})
Returns 1 if @var{val} is a vector, 0 otherwise.
@end deftypefun

@deftypefun int gh_pair_p (SCM @var{val})
Returns 1 if @var{val} is a pair, 0 otherwise.
@end deftypefun

@deftypefun int gh_procedure_p (SCM @var{val})
Returns 1 if @var{val} is a procedure, 0 otherwise.
@end deftypefun

@deftypefun int gh_list_p (SCM @var{val})
Returns 1 if @var{val} is a list, 0 otherwise.
@end deftypefun

@deftypefun int gh_inexact_p (SCM @var{val})
Returns 1 if @var{val} is an inexact number, 0 otherwise.
@end deftypefun

@deftypefun int gh_exact_p (SCM @var{val})
Returns 1 if @var{val} is an exact number, 0 otherwise.
@end deftypefun


@node Equality predicates
@section Equality predicates

These C functions mirror Scheme's equality predicate procedures with one
important difference.  The C routines return C boolean values (0 and 1)
instead of @code{SCM_BOOL_T} and @code{SCM_BOOL_F}.

The Scheme notational convention of putting a @code{?} at the end of
predicate procedure names is mirrored in C by placing @code{_p} at the
end of the procedure.  For example, @code{(equal? ...)} maps to
@code{gh_equal_p(...)}.

@deftypefun int gh_eq_p (SCM x, SCM y)
Returns 1 if @var{x} and @var{y} are equal in the sense of Scheme's
@code{eq?} predicate, 0 otherwise.
@end deftypefun

@deftypefun int gh_eqv_p (SCM x, SCM y)
Returns 1 if @var{x} and @var{y} are equal in the sense of Scheme's
@code{eqv?} predicate, 0 otherwise.
@end deftypefun

@deftypefun int gh_equal_p (SCM x, SCM y)
Returns 1 if @var{x} and @var{y} are equal in the sense of Scheme's
@code{equal?} predicate, 0 otherwise.
@end deftypefun

@deftypefun int gh_string_equal_p (SCM @var{s1}, SCM @var{s2})
Returns 1 if the strings @var{s1} and @var{s2} are equal, 0 otherwise.
@end deftypefun

@deftypefun int gh_null_p (SCM @var{l})
Returns 1 if @var{l} is an empty list or pair; 0 otherwise.
@end deftypefun


@node Memory allocation and garbage collection
@section Memory allocation and garbage collection

@c [FIXME: flesh this out with some description of garbage collection in
@c scm/guile]

@c @deftypefun SCM gh_mkarray (int size)
@c Allocate memory for a Scheme object in a garbage-collector-friendly
@c manner.
@c @end deftypefun


@node Calling Scheme procedures from C
@section Calling Scheme procedures from C

Many of the Scheme primitives are available in the @code{gh_}
interface; they take and return objects of type SCM, and one could
basically use them to write C code that mimics Scheme code.

I will list these routines here without much explanation, since what
they do is the same as documented in @ref{Standard Procedures, R4RS, ,
r4rs, R4RS}.  But I will point out that when a procedure takes a
variable number of arguments (such as @code{gh_list}), you should pass
the constant @var{SCM_EOL} from C to signify the end of the list.

@deftypefun SCM gh_define (char *@var{name}, SCM @var{val})
Corresponds to the Scheme @code{(define name val)}: it binds a value to
the given name (which is a C string).  Returns the new object.
@end deftypefun

@heading Pairs and lists

@deftypefun SCM gh_cons (SCM @var{a}, SCM @var{b})
@deftypefunx SCM gh_list (SCM l0, SCM l1, ... , SCM_UNDEFINED)
These correspond to the Scheme @code{(cons a b)} and @code{(list l0 l1
...)} procedures.  Note that @code{gh_list()} is a C macro that invokes
@code{scm_listify()}.
@end deftypefun

@deftypefun SCM gh_set_car (SCM @var{obj}, SCM @var{val})
@deftypefunx SCM gh_set_cdr (SCM @var{obj}, SCM @var{val})
These correspond to the Scheme @code{(set-car! ...)} and @code{(set-cdr!
...)} procedures.
@end deftypefun


@deftypefun SCM gh_car (SCM @var{obj})
@deftypefunx SCM gh_cdr (SCM @var{obj})
@dots{}

@deftypefunx SCM gh_c[ad][ad][ad][ad]r (SCM @var{obj})
These correspond to the Scheme @code{(caadar ls)} procedures etc @dots{}
@end deftypefun

@deftypefun SCM gh_set_car_x(SCM @var{pair}, SCM @var{value})
Modifies the CAR of @var{pair} to be @var{value}.  This is equivalent to
the Scheme procedure @code{(set-car! ...)}.
@end deftypefun

@deftypefun SCM gh_set_cdr_x(SCM @var{pair}, SCM @var{value})
Modifies the CDR of @var{pair} to be @var{value}.  This is equivalent to
the Scheme procedure @code{(set-cdr! ...)}.
@end deftypefun

@deftypefun {unsigned long} gh_length (SCM @var{ls})
Returns the length of the list.
@end deftypefun

@deftypefun SCM gh_append (SCM @var{args})
@deftypefunx SCM gh_append2 (SCM @var{l1}, SCM @var{l2})
@deftypefunx SCM gh_append3 (SCM @var{l1}, SCM @var{l2}, @var{l3})
@deftypefunx SCM gh_append4 (SCM @var{l1}, SCM @var{l2}, @var{l3}, @var{l4})
@code{gh_append()} takes @var{args}, which is a list of lists
@code{(list1 list2 ...)}, and returns a list containing all the elements
of the individual lists.

A typical invocation of @code{gh_append()} to append 5 lists together
would be
@smallexample
  gh_append(gh_list(l1, l2, l3, l4, l5, SCM_UNDEFINED));
@end smallexample

The functions @code{gh_append2()}, @code{gh_append2()},
@code{gh_append3()} and @code{gh_append4()} are convenience routines to
make it easier for C programs to form the list of lists that goes as an
argument to @code{gh_append()}.
@end deftypefun

@deftypefun SCM gh_reverse (SCM @var{ls})
Returns a new list that has the same elements as @var{ls} but in the
reverse order.  Note that this is implemented as a macro which calls
@code{scm_reverse()}.
@end deftypefun

@deftypefun SCM gh_list_tail (SCM @var{ls}, SCM @var{k})
Returns the sublist of @var{ls} with the last @var{k} elements.
@end deftypefun

@deftypefun SCM gh_list_ref (SCM @var{ls}, SCM @var{k})
Returns the @var{k}th element of the list @var{ls}.
@end deftypefun

@deftypefun SCM gh_memq (SCM @var{x}, SCM @var{ls})
@deftypefunx SCM gh_memv (SCM @var{x}, SCM @var{ls})
@deftypefunx SCM gh_member (SCM @var{x}, SCM @var{ls})
These functions return the first sublist of @var{ls} whose CAR is
@var{x}.  They correspond to @code{(memq x ls)}, @code{(memv x ls)} and
@code{(member x ls)}, and hence use (respectively) @code{eq?},
@code{eqv?} and @code{equal?} to do comparisons.

If @var{x} does not appear in @var{ls}, the value @code{SCM_BOOL_F} (not
the empty list) is returned.

Note that these functions are implemented as macros which call
@code{scm_memq()}, @code{scm_memv()} and @code{scm_member()}
respectively.
@end deftypefun

@deftypefun SCM gh_assq (SCM @var{x}, SCM @var{alist})
@deftypefunx SCM gh_assv (SCM @var{x}, SCM @var{alist})
@deftypefunx SCM gh_assoc (SCM @var{x}, SCM @var{alist})
These functions search an @dfn{association list} (list of pairs)
@var{alist} for the first pair whose CAR is @var{x}, and they return
that pair.

If no pair in @var{alist} has @var{x} as its CAR, the value
@code{SCM_BOOL_F} (not the empty list) is returned.

Note that these functions are implemented as macros which call
@code{scm_assq()}, @code{scm_assv()} and @code{scm_assoc()}
respectively.
@end deftypefun


@heading Symbols

@c @deftypefun SCM gh_symbol (SCM str, SCM len)
@c @deftypefunx SCM gh_tmp_symbol (SCM str, SCM len)
@c Takes the given string @var{str} of length @var{len} and returns a
@c symbol corresponding to that string.
@c @end deftypefun


@heading Vectors

@deftypefun SCM gh_make_vector (SCM @var{n}, SCM @var{fill})
@deftypefunx SCM gh_vector (SCM @var{ls})
@deftypefunx SCM gh_vector_ref (SCM @var{v}, SCM @var{i})
@deftypefunx SCM gh_vector_set (SCM @var{v}, SCM @var{i}, SCM @var{val})
@deftypefunx {unsigned long} gh_vector_length (SCM @var{v})
@deftypefunx SCM gh_list_to_vector (SCM @var{ls})
These correspond to the Scheme @code{(make-vector n fill)},
@code{(vector a b c ...)} @code{(vector-ref v i)} @code{(vector-set v i
value)} @code{(vector-length v)} @code{(list->vector ls)} procedures.

The correspondence is not perfect for @code{gh_vector}: this routine
taks a list @var{ls} instead of the individual list elements, thus
making it identical to @code{gh_list_to_vector}.

There is also a difference in gh_vector_length: the value returned is a
C @code{unsigned long} instead of an SCM object.
@end deftypefun


@heading Procedures

@c @deftypefun SCM gh_make_subr (SCM (*@var{fn})(), int @var{req}, int @var{opt}, int @var{restp}, char *@var{sym})
@c Make the C function @var{fn} available to Scheme programs.  The function
@c will be bound to the symbol @var{sym}.  The arguments @var{req},
@c @var{opt} and @var{restp} describe @var{fn}'s calling conventions.  The
@c function must take @var{req} required arguments and may take @var{opt}
@c optional arguments.  Any optional arguments which are not supplied by
@c the caller will be bound to @var{SCM_UNSPECIFIED}.  If @var{restp} is
@c non-zero, it means that @var{fn} may be called with an arbitrary number
@c of arguments, and that any extra arguments supplied by the caller will
@c be passed to @var{fn} as a list.  The @var{restp} argument is exactly
@c like Scheme's @code{(lambda (arg1 arg2 . arglist))} calling convention.
@c 
@c For example, the procedure @code{read-line}, which takes optional
@c @var{port} and @var{handle-delim} arguments, would be declared like so:
@c 
@c @example
@c SCM scm_read_line (SCM port, SCM handle_delim);
@c gh_make_subr (scm_read_line, 0, 2, 0, "read-line");
@c @end example
@c 
@c The @var{req} argument to @code{gh_make_subr} is 0 to indicate that
@c there are no required arguments, so @code{read-line} may be called
@c without any arguments at all.  The @var{opt} argument is 2, to indicate
@c that both the @var{port} and @var{handle_delim} arguments to
@c @code{scm_read_line} are optional, and will be bound to
@c @code{SCM_UNSPECIFIED} if the calling program does not supply them.
@c Because the @var{restp} argument is 0, this function may not be called
@c with more than two arguments.
@c @end deftypefun

@deftypefun SCM gh_apply (SCM proc, SCM args)
Call the Scheme procedure @var{proc}, with the elements of @var{args} as
arguments.  @var{args} must be a proper list.  
@end deftypefun

@deftypefun SCM gh_call0 (SCM proc)
@deftypefunx SCM gh_call1 (SCM proc, SCM arg)
@deftypefunx SCM gh_call2 (SCM proc, SCM arg1, SCM arg2)
@deftypefunx SCM gh_call3 (SCM proc, SCM arg1, SCM arg2, SCM arg3)
Call the Scheme procedure @var{proc} with no arguments
(@code{gh_call0}), one argument (@code{gh_call1}), and so on.  You can
get the same effect by wrapping the arguments up into a list, and
calling @code{gh_apply}; Guile provides these functions for convenience.
@end deftypefun


@deftypefun SCM gh_catch (SCM key, SCM thunk, SCM handler)
@deftypefunx SCM gh_throw (SCM key, SCM args)
Corresponds to the Scheme @code{catch} and @code{throw} procedures,
which in Guile are provided as primitives.
@end deftypefun

@c [FIXME: must add the I/O section in gscm.h]

@deftypefun SCM gh_is_eq (SCM a, SCM b)
@deftypefunx SCM gh_is_eqv (SCM a, SCM b)
@deftypefunx SCM gh_is_equal (SCM a, SCM b)
These correspond to the Scheme @code{eq?}, @code{eqv?} and @code{equal?}
predicates.
@end deftypefun

@deftypefun int gh_obj_length (SCM @var{obj})
Returns the raw object length.
@end deftypefun

@heading Data lookup

For now I just include Tim Pierce's comments from the @file{gh_data.c}
file; it should be organized into a documentation of the two functions
here.

@smallexample
/* Data lookups between C and Scheme

   Look up a symbol with a given name, and return the object to which
   it is bound.  gh_lookup examines the Guile top level, and
   gh_module_lookup checks the module namespace specified by the
   `vec' argument.

   The return value is the Scheme object to which SNAME is bound, or
   SCM_UNDEFINED if SNAME is not bound in the given context. [FIXME:
   should this be SCM_UNSPECIFIED?  Can a symbol ever legitimately be
   bound to SCM_UNDEFINED or SCM_UNSPECIFIED?  What is the difference?
   -twp] */
@end smallexample


@node Mixing gh and scm APIs
@section Mixing gh and scm APIs