* libguile/objcodes.c (OBJCODE_COOKIE): Bump again, as our jump offsets
are now multiplied by 8.
* libguile/vm-i-system.c (BR): Interpret the 16-bit offset as a relative
jump to the nearest 8-byte-aligned block -- increasing relative jump
range from +/-32K to +/-240K.
(mvra): Do the same for the mvra jump.
* libguile/vm.c (really_make_boot_program): Align the mvra.
* module/language/assembly.scm (align-block): New export, for aligning
blocks.
* module/language/assembly/compile-bytecode.scm (write-bytecode): Emit
jumps to the nearest 8-byte-aligned block. Effectively our range is 18
bits in either direction. I would like to do this differently -- have
long-br and long-br-if, and all the other br instructions go to 8 bits
only. But the assembler doesn't have an appropriate representation to
allow me to do this yet, so for now this is what we have.
* module/language/assembly/decompile-bytecode.scm (decode-load-program):
Decode the 19-bit jumps.
* libguile/objcodes.c (OBJCODE_COOKIE): Bump objcode cookie, as we added
to struct scm_objcode.
* libguile/objcodes.h (struct scm_objcode): Add a uint32 after metalen
and before base, so that if the structure has 8-byte alignment, base
will have 8-byte alignment too. (Before, base was 12 bytes from the
start of the structure, now it's 16 bytes.)
* libguile/vm-engine.h (ASSERT_ALIGNED_PROCEDURE): Add a check that can
be turned on with VM_ENABLE_PARANOID_ASSERTIONS.
(CACHE_PROGRAM): Call ASSERT_ALIGNED_PROCEDURE.
* libguile/vm-i-system.c (long-local-ref): Add a missing semicolon.
* libguile/vm.c (really_make_boot_program): Rework to operate directly
on a malloc'd buffer, so that the program will be 8-byte aligned.
* module/language/assembly.scm (*program-header-len*): Add another 4 for
the padding.
(object->assembly): Fix case in which we would return (make-int8 0)
instead of (make-int8:0). This would throw off compile-assembly.scm's
use of addr+.
* module/language/assembly/compile-bytecode.scm (write-bytecode): Write
out the padding int.
* module/language/assembly/decompile-bytecode.scm (decode-load-program):
And pop off the padding int too.
* module/language/glil/compile-assembly.scm (glil->assembly): Don't pack
the assembly, assume that assembly.scm has done it for us. If a
program has a meta, pad out the program so that meta will be aligned.
* test-suite/tests/asm-to-bytecode.test: Adapt to expect programs to
have the extra 4-byte padding int.
* module/language/glil/compile-assembly.scm (glil->assembly)
(dump-object): Fix an exciting bug! Subprograms of subprograms were
not being aligned correctly, because the code was generated too early.
So instead delay dumping the object table until the proper time.
* module/ice-9/psyntax.scm (build-lexical-var): Make our gensyms really
unique. Before, there was a chance that different lexicals could
result in the same gensym.
* module/ice-9/psyntax-pp.scm: Regenerate.
* libguile/vm-i-system.c (long-local-ref, long-local-set)
(make-variable): New intructions, for handling nlocs >= 256.
* module/language/glil/compile-assembly.scm (glil->assembly): Compile
<glil-lexical> with support for nlocs >= 256.
* libguile/objcodes.h (struct scm_objcode): Remove the "unused" field --
the old "nexts" -- and expand nlocs to 16 bits.
* module/language/assembly/compile-bytecode.scm (write-bytecode): Write
the nlocs as a uint16.
* module/language/assembly/decompile-bytecode.scm (decode-load-program):
Decompile 16-bit nlocs. It seems this decompilation is little-endian
:-/
* test-suite/tests/asm-to-bytecode.test: Fix up to understand nlocs as a
little-endian value. The test does the right thing regarding
endianness.
* libguile/programs.h:
* libguile/programs.c: (SCM_PROGRAM_FREE_VARIABLES): Rename from
SCM_PROGRAM_FREE_VARS. Callers changed.
* libguile/programs.c (scm_make_program): Rename arg to
"free_variables".
(scm_program_free_variables): Rename from program-free-vars.
* libguile/vm-engine.h:
* libguile/vm-engine.c (VM_CHECK_FREE_VARIABLES): Rename from
VM_CHECK_CLOSURE.
(vm_engine, CACHE_PROGRAM): Rename closure and closure_count to free_vars and
free_vars_vount.
* libguile/vm-i-system.c (FREE_VARIABLE_REF): Rename from CLOSURE_REF.
(free-ref, free-boxed-ref, free-boxed-set): Rename from closure-ref,
closure-boxed-ref, closure-boxed-set.
(make-closure): Renamed from make-closure2.
* module/language/glil/compile-assembly.scm (glil->assembly): Hack to
never write out the the old "make-closure" instruction. Will fix
better later. Change to emit free-ref etc instead of closure-ref.
* module/language/tree-il/compile-glil.scm (flatten): Emit make-closure
instead of make-closure2, now that the old make-closure is gone.
* module/system/vm/program.scm (system): Rename program-free-vars to
program-free-variables.
* test-suite/tests/tree-il.test ("lambda"): Update for make-closure.
* libguile/frames.c (scm_frame_external_link): Removed.
* libguile/frames.h: No need to have the "external link" in the stack
frame -- update macros to take the new situation into account.
* libguile/objcodes.h (struct scm_objcode): Rename the nexts field to
"unused". In the future we can use it for nlocs, I think.
(SCM_OBJCODE_NEXTS): removed.
* libguile/programs.h:
* libguile/programs.c (scm_make_program): Expect the third argument to
be a vector of free variables, not a list of free variables.
SCM_BOOL_F indicates no free variables, not SCM_EOL.
(program_mark): Adapt.
(scm_program_arity): No more nexts.
(scm_program_free_vars): Replaces scm_program_externals.
* libguile/vm-engine.c (VM_CHECK_EXTERNAL)
(vm_engine): No need for the "external" var.
* libguile/vm-engine.h (CACHE_PROGRAM): Update for SCM_PROGRAM_FREE_VARS
instead of SCM_PROGRAM_EXTERNALS.
(NEW_FRAME): Update for new frame size, and no need to cons up
externals. Yay :)
* libguile/vm-i-loader.c (load-program): Update for scm_make_program.
* libguile/vm-i-system.c (external-ref, external-set): No more.
(make-closure): No more.
(goto/args): No need to re-cons externals here. Update for new stack
frame size.
(mv-call, return, return/values): Update for new frame size. No need
to reinstate externals on return.
* libguile/vm.c (really_make_boot_program, scm_load_compiled_with_vm):
Update for scm_make_program.
* module/language/objcode/spec.scm (objcode-env-externals): Treat '() as
#f, for the externals. Need to clean this up later...
* module/system/vm/program.scm (arity:nexts): Remove. Rename
program-external to program-free-vars.
* module/language/glil.scm (<glil>): New GLIL type, <glil-lexical>,
which will subsume other lexical types.
* module/language/glil/compile-assembly.scm: Compile <glil-lexical>.
(make-open-binding): Change the interpretation of the second argument
-- instead of indicating an "external" var, it now indicates a boxed
var.
(open-binding): Adapt to new glil-bind format.
* module/language/tree-il/analyze.scm: Add a lot more docs.
(analyze-lexicals): Change the allocation algorithm and output format
to allow the tree-il->glil compiler to capture free variables
appropriately and to reference bound variables in boxes if necessary.
Amply documented.
* module/language/tree-il/compile-glil.scm (compile-glil): Compile
lexical variable access to <glil-lexical>. Emit variable capture and
closure creation code here, instead of leaving that task to the
GLIL->assembly compiler.
* test-suite/tests/tree-il.test: Update expected code emission.
* libguile/vm-i-system.c (box, empty-box): Boxing values and storing
them in local variables.
(local-boxed-ref, local-boxed-set): A combination of local-ref then
variable-ref/set.
(make-closure2, closure-ref, closure-boxed-ref, closure-boxed-set):
New ops. The idea is to migrate Guile over to using flat dispay
closures. See the paper "Three Implementation Models for Scheme" by
Kent Dybvig for more details; this is the "stack-based" model.
* libguile/vm-engine.c:
* libguile/vm-engine.h: Add the necessary infrastructure to keep track
of a "closure" variable, like our "externals" in semantics, but
minimal, flat, and O(1) in implementation.
* libguile/objcodes.c (OBJCODE_COOKIE): Bump.
* libguile/vm-i-loader.c:
* libguile/vm-i-scheme.c:
* libguile/vm-i-system.c: Renumber instructions, so I can have a bit
more space to work.
* libguile/vm.c (struct t_32bit_aligned): New.
(really_make_boot_program)[bytes]: Use it. This fixes possibly
unaligned accesses, which cause a "bus error" on some platforms (e.g.,
sparc-*).
* libguile/objcodes.c: Fix `sizeof (OBJCODE_COOKIE)' assertion: the
trailing 0 must not be taken into account, and multiple of 8 means the
3 LSBs are clear.
* libguile/objcodes.c (OBJCODE_ENDIANNESS, _OBJCODE_STRINGIFY,
OBJCODE_STRINGIFY, OBJCODE_WORD_SIZE): New macros.
(OBJCODE_COOKIE): Use them. The intent is that `.go' files compiled
for a different endianness or word size are detected.
* libguile/gen-scmconfig.c (main): Don't emit typedefs for `long_long'
and `ulong_long'. This was already deprecated in 1.8 and known to
cause conflicts with other libraries such as HDF5, as reported by Mark
Patterson <mpatterson@physics.queensu.ca>
(http://lists.gnu.org/archive/html/bug-guile/2009-02/msg00003.html).
* libguile/instructions.c: In loops, replace scm_op_last with
SCM_VM_NUM_INSTRUCTIONS.
(fetch_instruction_table): Protect the instruction symbols from
collection. Before they were only marked by the name->opcode hash
table, leading to races in which they could be collected.
(scm_lookup_instruction_by_name): Protect the hash table earlier, as
it's not actually a stack variable, since it's static.
* libguile/vm-i-scheme.c (BV_FIXABLE_INT_REF, BV_INT_REF):
(BV_FLOAT_REF, BV_FIXABLE_INT_SET, BV_INT_SET, BV_FLOAT_SET): Fix the
bounds check for the last element.
* libguile/vm-i-scheme.c (vector_ref, vector_set, BV_FIXABLE_INT_REF,
BV_INT_REF, BV_FLOAT_REF, BV_FIXABLE_INT_SET, BV_INT_SET,
BV_FLOAT_SET): Explicitly initialize all locals, to make some versions
of GCC happier. Patch by Dale P. Smith <dsmich@roadrunner.com>.
Thanks to Bill Schottstaedt for reporting this problem!
* libguile/numbers.c (mem2ureal): Don't be misled by *p_exactness
being INEXACT on entry (as is possible when reading a complex
number): use local exactness variable x which starts as EXACT.
Call mem2decimal_from_point () with &x instead of p_exactness.
* test-suite/tests/numbers.test ("string->number"): Add complex number
tests suggested by Bill.
Thanks to Ludovic for the new wording!
* doc/ref/api-compound.texi (Accessing Arrays from C): Correct text to
reflect the current implementation of scm_array_get_handle and
scm_array_handle_release - which don't actuall do any dynwind stuff.
* libguile/instructions.c (scm_instruction_list): Fix a longstanding bug
in this humble function.
* libguile/vm-i-scheme.c (BV_FIXABLE_INT_SET, BV_INT_SET, BV_FLOAT_SET):
Fix some bugs in these macros -- now the bytevector ops work.
* module/language/tree-il/compile-glil.scm (*primcall-ops*): Compile
bytevector calls to VM ops.
* module/language/tree-il/primitives.scm
(*interesting-primitive-names*): Resolve bytevector calls to primitive
calls.
* module/language/tree-il/primitives.scm
(*interesting-primitive-names*): Resolve vector-ref and vector-set!.
* module/language/tree-il/compile-glil.scm (*primcall-ops*): And compile
vector-ref and vector-set! to their opcodes.
* libguile/vm-i-scheme.c (vector-ref, vector-set): New opcodes, placed
before the bytevector ops. The renumbering shouldn't affect anyone,
given that the bytevector ops were not yet used. Fix a few bugs in the
bytevector ops.
* libguile/instructions.h (SCM_VM_NUM_INSTRUCTIONS): Enlarge to 255. Not
sure what performance effects this will have.
* libguile/vm-engine.c: Add new error case, vm_error_not_a_bytevector.
* libguile/vm-engine.h: Don't assign specific registers for i386. Having
added the new VM vector ops, GCC 4.4 is erroring for me now.
* libguile/vm-i-scheme.c: Add bytevector-specific ops to the VM.
We don't actually use them yet, though.
* libguile/bytevectors.h (scm_i_native_endianness): Allow the VM to use
scm_i_native_endianness, but still keep it marked as internal.
* libguile/bytevectors.c: Adjust to use scm_i_native_endianness instead
of native_endianness. Define it at bootstrap time.
This reverts commit d53f85dd85.
It was a confusing mistake to create an FAQ file in the Guile
repository/distribution, because there was already an FAQ page on the
Guile web site. The information that was in the FAQ file is now in
the FAQ web page.
* libguile/gen-scmconfig.c (main): Produce a definition for
`scm_t_off'.
* libguile/ports.h (scm_t_port)[read_buf_size, saved_read_buf_size,
write_buf_size, seek, truncate]: Use `scm_t_off' instead of `off_t' so
that the layout and size of the structure does not depend on the
application's `_FILE_OFFSET_BITS' value. Reported by Bill
Schottstaedt, see
http://lists.gnu.org/archive/html/bug-guile/2009-06/msg00018.html.
(scm_set_port_seek, scm_set_port_truncate): Update.
* libguile/ports.c (scm_set_port_seek, scm_set_port_truncate): Use
`scm_t_off' and `off_t_or_off64_t'.
* libguile/fports.c (fport_seek, fport_truncate): Use `scm_t_off'
instead of `off_t'.
* libguile/r6rs-ports.c (bip_seek, cbp_seek, bop_seek): Use `scm_t_off'
instead of `off_t'.
* libguile/rw.c (scm_write_string_partial): Likewise.
* libguile/strports.c (st_resize_port, st_seek, st_truncate): Likewise.
* doc/ref/api-io.texi (Port Implementation): Update prototype of
`scm_set_port_seek ()' and `scm_set_port_truncate ()'.
* NEWS: Update.
