* module/language/cps/contification.scm (contify): It could be that
visiting pending contifications could enqueue more contifications, so
iterate to a fixed point. Signal an error if there are any pending
contifications at the end of an iteration.
* module/language/cps/dfg.scm (control-point?): New interface, replaces
branch?.
(dead-after-def?, dead-after-use?, dead-after-branch?): Remove these.
The first one was fine; dead-after-use? was conservative but OK; but
dead-after-branch? was totally bogus. Instead we use precise liveness
information in the allocator.
* module/language/cps/slot-allocation.scm ($allocation): Remove "def"
and "dead" slots. We'll communicate liveness information in some
other way to the compiler.
(allocate-slots): Rework to use precise liveness information.
* module/system/vm/program.scm (program-arguments-alists): Export this
interface. Fall back to grovelling through procedure-minimum-arity if
the program has no arities, as might be the case for continuations.
* module/language/tree-il/analyze.scm (validate-arity): Use
program-arguments-alists instead of the program-arities interface, to
cover both stack VM and RTL programs.
* libguile/vm-engine.c (prompt): Adapt to explicitly set the saved SP so
we know how many incoming values the handler will receive, and to make
escape-only? a flag.
* module/language/cps/compile-rtl.scm (emit-rtl-sequence): $prompt
should only be found in a "seq" context, as it just pushes on a prompt
and doesn't bind any values. On the other hand it should emit
appropriate code for the handler to bind its values, so do that.
* module/language/cps/slot-allocation.scm ($cont-allocation): Add a note
that proc-slot is used by prompts as well.
(allocate-slots): Compute the allocation of a prompt handler's args.
* module/language/tree-il/compile-cps.scm (convert): Use "unwind"
instead of the nonexistent "pop-prompt".
* module/system/vm/disassembler.scm (code-annotation): Adapt to change
in prompt VM op.
* libguile/vm-engine.c (receive-values): Add an ALLOW-EXTRA? flag in
unused bits of the third word. Without it, receive-values will check
for the exact number of incoming values.
* libguile/vm.c (vm_error_wrong_number_of_values): New error case.
* module/language/cps/compile-rtl.scm (emit-rtl-sequence): Adapt to add
the ALLOW-EXTRA? flag.
* module/language/cps/dfg.scm (dead-after-use?): Don't kill a variable
if it was defined outside the current loop.
(dead-after-branch?): Likewise, but I don't think this helper is
correct yet :/
* module/language/cps/dfg.scm ($block): Add pdom and pdom-level fields,
for post-dominators.
(reverse-post-order, convert-predecessors): Arrange to work either
way: for dominators or for post-dominators.
(analyze-control-flow!): Compute post-dominators.
(dominates?): Refactor.
(post-dominates?): New helper.
* module/language/cps/dfg.scm ($block): Add "irreducible" field, format
TBD.
(reverse-post-order): Return a vector directly.
(convert-predecessors, compute-dom-levels, compute-idoms):
(analyze-control-flow!): Factor out control flow analsysis a bit
better.
(identify-loops): New helper. Currently a NOP.
(visit-fun): Adapt to compute-dominator-tree rename to
analyze-control-flow!.
* module/language/cps/dfg.scm (reverse-post-order, for-each/enumerate)
(convert-predecessors, finish-idoms, compute-dominator-tree): Compute
a dominator tree. We don't use it yet.
* module/language/cps/dfg.scm: Refactor so that we can think about
building a dominator tree. Split continuations out of use maps and
put them in a separate table, which will have more flow information.
(visit-fun): Mark clauses as using their bodies.
(lookup-predecessors, lookup-successors): New exports.
(find-defining-expression): Add an exception for clauses, now that
clauses are in the flow graph.
(continuation-bound-in?): Rename from variable-bound-in?, as it can
currently only be used for continuations.
* module/language/cps/contification.scm (contify): Adapt to use
lookup-predecessors and continuation-bound-in?.
* module/language/tree-il/peval.scm (peval): Fix a bug whereby inlined
function applications with default argument initializers were putting
the initializers in the wrong scope.
* test-suite/tests/peval.test ("partial evaluation"): Add a test.
* module/language/cps/contification.scm (contify): Exhaustively replace
contified tail continuations, to fix a bug in nested tail-recursive
contifications. Likewise, call lookup-return-cont when searching for
common return continuations.
* module/language/cps/dfg.scm (variable-free-in?): Rename from
variable-used-in?, to match CWCC language.
(variable-bound-in?): New interface.
* module/language/cps/contification.scm (contify): Adapt caller. Add
more comments.
* module/language/tree-il/compile-cps.scm: New module implementing CPS
conversion of Tree-IL.
* module/Makefile.am:
* module/language/tree-il/spec.scm:
* module/language/cps/spec.scm: Integrate CPS in the build and language
system.
* module/system/base/compile.scm (compile-file): Pass #:to-disk? as an
option to indicate that the result will be being loaded from disk.
Perhaps a linker might want to page-align in that case.
* module/language/elisp/compile-tree-il.scm (process-options!): Accept
and ignore the #:to-file compiler option.
* module/language/tree-il/primitives.scm (maybe-simplify-to-eq): Wrap
within another lambda, binding the primitive name. If there are less
than two arguments, expand to constant #t. If there are more than two
arguments, convert into a conjunction of binary applications.
(expand-chained-comparisons): New procedure.
(*primitive-expand-table*): Add entries for (< <= = >= > eq?).
* module/language/tree-il/primitives.scm (define-primitive-expander):
Use 'match-lambda*' instead of 'case-lambda' for pattern matching.
(*primitive-expand-table*): In primitive expanders for '+', '*', '-',
'/', 'logior', and 'logand', assume conventional left-to-right
associativity.
* module/language/tree-il/peval.scm (peval): Remove abort optimization;
the CPS compiler will do much better here, and it is complicating
things in the meantime.
* module/language/scheme/decompile-tree-il.scm (choose-output-names):
A <lambda> with no <lambda-case> decompiles into a 'case-lambda'
primitive. Ensure that 'case-lambda' is not shadowed by a lexical.
* module/language/ecmascript/compile-tree-il.scm (with-return-prompt):
Adapt to the changes in 178a40928a.
Prompt tree-il nodes now contain an explicit 'escape-only?' flag, and
the body and handler are now both lambdas.
* module/language/tree-il.scm (<prompt>): Change to have the body and
handler be lambdas, and add an "escape-only?" field. This will make
generic prompts work better in CPS or ANF with the RTL VM, as it
doesn't make sense in that context to capture only part of a frame.
Escape-only prompts can still be fully inlined.
(parse-tree-il, unparse-tree-il): Add escape-only? to the
serialization.
(make-tree-il-folder, pre-post-order): Deal with escape-only?.
* module/language/tree-il/analyze.scm (analyze-lexicals): Handle
escape-only?, and the new expectations for the body and handler.
* module/language/tree-il/canonicalize.scm (canonicalize): Ensure that
the body of an escape-only continuation is a thunk, and that the
handler is always a lambda.
* module/language/tree-il/debug.scm (verify-tree-il): Assert that
escape-only? is a boolean.
* module/language/tree-il/cse.scm (cse):
* module/language/tree-il/effects.scm (make-effects-analyzer):
* module/language/tree-il/peval.scm (peval):
* module/language/tree-il/primitives.scm (*primitive-expand-table*):
* test-suite/tests/peval.test ("partial evaluation"):
* module/language/tree-il/compile-glil.scm (flatten-lambda-case): Adapt
to <prompt> change.
* libguile/vm-i-system.c (push-fluid, pop-fluid):
* doc/ref/vm.texi (Dynamic Environment Instructions): Rename wind-fluids
to push-fluid, and unwind-fluids to pop-fluid. They now only work on
one fluid binding at a time.
* module/ice-9/boot-9.scm (with-fluid*): Implement in Scheme in terms of
primcalls to push-fluid and pop-fluid.
(custom-throw-handler, catch, with-throw-handler): Use with-fluid*
instead of with-fluids, as with-fluids is no longer available before
psyntax is loaded.
(with-fluids): Define in Scheme in terms of with-fluid*.
* libguile/fluids.c (scm_with_fluid): Rename from scm_with_fluids, and
don't expose to Scheme.
* libguile/eval.c (eval): Remove SCM_M_WITH_FLUIDS case.
* libguile/expand.c (expand_with_fluids): Remove with-fluids syntax.
(DYNLET): Remove, no longer defining dynlet in the %expanded-vtables.
* libguile/expand.h: Remove dynlet definitions.
* module/ice-9/eval.scm (primitive-eval): Remove with-fluids case.
* libguile/memoize.c (do_push_fluid, do_pop_fluid): New primitive
helpers, like wind and unwind.
(memoize): Memoize wind and unwind primcalls. Don't memoize dynlet to
with-fluids.
(scm_init_memoize): Initialize push_fluid and pop_fluid here.
* libguile/memoize.h (SCM_M_WITH_FLUIDS): Remove definition.
* module/ice-9/psyntax.scm (build-dynlet): Remove; this just supported
with-fluids, which is now defined in boot-9.
* module/ice-9/psyntax-pp.scm: Regenerate.
* doc/ref/compiler.texi (Tree-IL):
* module/language/tree-il.scm:
* module/language/tree-il/analyze.scm:
* module/language/tree-il/canonicalize.scm:
* module/language/tree-il/compile-glil.scm:
* module/language/tree-il/cse.scm:
* module/language/tree-il/debug.scm:
* module/language/tree-il/effects.scm: Remove <dynlet>. Add cases for
primcalls to push-fluid and pop-fluid in compile-glil.scm and
effects.scm.
* module/language/tree-il/peval.scm (peval): Factor out
with-temporaries; probably a bad idea, but works for now. Factor out
make-begin0 (a better idea). Inline primcalls to with-fluid*, and
remove dynlet cases.
* module/language/tree-il/primitives.scm (*interesting-primitive-names*):
Add with-fluid*.
